Gerber MP 600 D.E.T Fake.
-
@NewZona Rides said:
Does anyone know if the tool screws work from these fakes in the real Gerber tools. I snapped one off my Center Drive and need to replace it. I know the one from the MP600 is the same but I don't want to tear apart a good MP600 just to tale the screws I need.DAmn it is sad though, you snap a screw and consider buying an entire fake tool because it is cheaper/easier than trying to get a replacement screw for the original. I wish Gerber would take this into account. Making a warranty claim to them is the slowest process.
-
@Spoonrobot said:
Interesting. Think it's worthwhile to alert Gerber to this?A few years ago the firearms accessory the Grip Pod became an item that was issued to certain US Military members, over the course of time poorly made Chinese clones managed to get into the supply system and cause problems for frontline troops. Being that the EOD tool is sometimes issued and used by US Military personnel it may be worth an email to let Gerber know so they can make sure their supply line doesn't get compromised.
The only way it gets into front line troops is when the troops steal the genuine items, sell them and then replace them with cheaper items so they don't get fined by the army for losing items. I think everyone involved is to blame a little. When I was in my ET tool (the thing we use to bury our poop with) got stolen by another soldier. It is impossible to prove but the army would have fined me about 100 bucks for that, so I went down and bought a cheap 20 dollar replacement. It never bothered me because I never went to the front line but it is hardly the copycat manufacturers fault that the tools end up there. It takes 4 parties to contribute, the manufacturer for making them, army for charing their troops to replace them, the soliders for stealing them and the victim soldiers for replacing them with counterfiets.
-
Hi guys,
I was searching for used multitools on ebay, stumbled across a seller in EU with some auctions of leathermans and gerbers (which is great for me, I won't pay duties and taxes on that purchase). So I got a bit too exited and placed bids on a leatherman and four mp600s. And now I'm a bit nervous about the gerbers being fake. Could you take a look at his listings and tell me if his gerbers are legit ? They seem fine to me, but then again the only gerber I own is a splice so I'm not sure I'll recognize a decent copy even if I hold it in my hands. Here is the link https://www.ebay.com/sch/tech-rec/m.html?item=114814803513&ssPageName=STRK%3AMEBIDX%3AIT&rt=nc&_trksid=p2047675.l2562 -
@DavisNikolov said:
Hi guys,
I was searching for used multitools on ebay, stumbled across a seller in EU with some auctions of leathermans and gerbers (which is great for me, I won't pay duties and taxes on that purchase). So I got a bit too exited and placed bids on a leatherman and four mp600s. And now I'm a bit nervous about the gerbers being fake. Could you take a look at his listings and tell me if his gerbers are legit ? They seem fine to me, but then again the only gerber I own is a splice so I'm not sure I'll recognize a decent copy even if I hold it in my hands. Here is the link https://www.ebay.com/sch/tech-rec/m.html?item=114814803513&ssPageName=STRK%3AMEBIDX%3AIT&rt=nc&_trksid=p2047675.l2562As far as I can tell, all those MP600's look the real deal

-
@AlephZero said:
As far as I can tell, all those MP600's look the real deal
Thank you, I red some about the differences myself and they seem to check out. Auctions end tonight, we'll see what ends up in my basket

Edit : it ends tomorrow night -
I noticed that Mack Trucks is now selling a fake DET with their name on it; called the "Dark Night" Multitool. Really does not make sense, given they have SAKs and LMs--the real deal.
https://www.mack-shop.com/eshop/p/3080/mack-dark-knight-multitool
-
@DavisNikolov said:
Hi guys,
I was searching for used multitools on ebay, stumbled across a seller in EU with some auctions of leathermans and gerbers (which is great for me, I won't pay duties and taxes on that purchase). So I got a bit too exited and placed bids on a leatherman and four mp600s. And now I'm a bit nervous about the gerbers being fake. Could you take a look at his listings and tell me if his gerbers are legit ? They seem fine to me, but then again the only gerber I own is a splice so I'm not sure I'll recognize a decent copy even if I hold it in my hands. Here is the link https://www.ebay.com/sch/tech-rec/m.html?item=114814803513&ssPageName=STRK%3AMEBIDX%3AIT&rt=nc&_trksid=p2047675.l2562That seller usually sells legitimate tools : I bought quite a lot of items from him in the last months (mostly MP600/400s and knives)
His Leathermans end up always too high for me though.
Only take care that some tools that "look" good at first on the pictures might not be properly working in the end (slightly bend tools or such cannot always be seen easily on pics) -
Thank you for the input. I didn't manage to get anything this time. Which reminded me why I only search for listings that have "buy now" price.
-
@DavisNikolov said:
Thank you for the input. I didn't manage to get anything this time. Which reminded me why I only search for listings that have "buy now" price.Just try to "snipe"
wait for the very last time to put the bid and you may be lucking sometimes 
-
I know how the game is played, I just don't like it

-
-
For what it's worth, I picked one of these up and the thing is absolute garbage. Thankfully mine isn't even marked Gerber, which is a step in the right direction. Now all we need is a fire in the factory that made it and we'll be set.
The tool sinks completely into the sheath, making it difficult to grab.
The tool was completely covered in oil upon arrival, which is a surprise, as I don't think any iron was harmed in the making of this piece of crap.
The plier head slides like a water balloon on a bed of nails, but only if both were covered in gravel.
The tools are somehow both floppy and tight at the same time, which caused my fingers to contact the blade edge when trying to pull the tools out for a photo.
The blade is so sharp that I didn't feel the cut... because it didn't. my soft flesh bounced off the serrations like they weren't even there. This tool is so bad that I am, for the first time, disappointed to not be bleeding.
All in all, this knockoff is an absolute piece of smurf, and I have had some pretty smurfty tools in my time. Need I remind you that I have a fake gold fake Tread? Well, that's an improvement over this piece of crap.
Def
-
-
@m47mu74nt said:
what a review !
any pics so we can have our eyes bleeding of despair?There are a couple here:
/post/2301708
Def
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login