Daredevil Challenge 2021
-
@ReamerPunch said:
I have changed my mind and will be using the Coast Pocket Paper-weight. Don't get me wrong, the Gerber Flik is atrociously designed, but it is still functional. The blades are sharp, the scissors cut thin items, the drivers can turn screws, the pliers are good. The can opener sucks, but still. Using the Gerber would be frustrating more due to design than performance.The Coast Pocket POS, on the other hand, is truly terrible. So it will be more interesting to use. So I'll try and get by with that.
My God man, the rules call for using a tool you don't especially care for but they don't say you have to suffer for your art. I think that your use of the Coast tool would be just too painful to watch.

-
@ReamerPunch said:
I have changed my mind and will be using the Coast Pocket Paper-weight. Don't get me wrong, the Gerber Flik is atrociously designed, but it is still functional. The blades are sharp, the scissors cut thin items, the drivers can turn screws, the pliers are good. The can opener sucks, but still. Using the Gerber would be frustrating more due to design than performance.The Coast Pocket POS, on the other hand, is truly terrible. So it will be more interesting to use. So I'll try and get by with that.
The Flik was my first MT...
I used and abused mine for ten years until It had stolen from me.Still missing my quirky Flik. I loved how It deployed the pliers.
And agree with all faulty designs pointed
-
@Alan K. said:
My God man, the rules call for using a tool you don't especially care for but they don't say you have to suffer for your art. I think that your use of the Coast tool would be just too painful to watch.

:agree: It will be hard enough using a good or decent tool that you don’t like, but using a terrible tool just seems really painful. After a month of no challenge and using any and every tool I want and love, I’ve actually been reconsidering participating in this challenge. But I still will because using a tool I hate will just make me appreciate the tools I love more.
I’m considering using the Kutmaster Minimaster or Swiss Army Evogrip S18. I’m leaning towards the Evogrip, for the reasons you mention. At least the S18 is a good quality tool, it is just that I can’t stand the scales. Whereas the Minimaster is uncomfortable to use, not a form factor I really like (have to open to access any tools) and the tools are low quality that don’t work that well.
How much do you want to endure in the name of a challenge?
-
Daredevil Challenge August 2021
01 Comis
02 RF52
03 cody6268
04 Alan K.
05 Kev D
06 Etherealicer (if not busy fighting zombies)
07 ReamerPunch
08 SurgeUK
09 Poncho65
10 chip
11 Sos24
12 Echotech
13 Humayd A R Mahomedy
14 pipedreams
15 Barry Rowland
16 Adam5
17 countrydirtI have a LM Wingman that I've never really bonded with. I pulled it out of my bike bag where it lives and will clean and oil it in preparation for this challenge. The only thing that I think the Wingman has going for it is a pocket clip. I don't like the half and half blade, so I'll have to get used to that. At least I have a few months to get mentally ready for using it!
-
@ReamerPunch said:
I have changed my mind and will be using the Coast Pocket Paper-weight. Don't get me wrong, the Gerber Flik is atrociously designed, but it is still functional. The blades are sharp, the scissors cut thin items, the drivers can turn screws, the pliers are good. The can opener sucks, but still. Using the Gerber would be frustrating more due to design than performance.The Coast Pocket POS, on the other hand, is truly terrible. So it will be more interesting to use. So I'll try and get by with that.

Actually, you are making me feel guilty for thinking about choosing a MT that is awkward but useable (Klein TripSaver). Maybe I should look through the crud I have accumulated and choose something riskier.
-
@pipedreams said:
I’m still leaning towards the LM Micra.Me too PD

I’ve a bit of a love/hate relationship with them… got 3, the plain steel non-painted one scissors seem better than the other two, so I’d better use the worst one for this I suppose

-
too. It's a good m/t, but I can't say I'd take it over a Classic or definitely a Minichamp. -
I have always given the Gerber Suspension a hard time
so I may go with the NXT that I bought a while back :ahhh -
@ReamerPunch said:
I have changed my mind and will be using the Coast Pocket Paper-weight. Don't get me wrong, the Gerber Flik is atrociously designed, but it is still functional. The blades are sharp, the scissors cut thin items, the drivers can turn screws, the pliers are good. The can opener sucks, but still. Using the Gerber would be frustrating more due to design than performance.The Coast Pocket POS, on the other hand, is truly terrible. So it will be more interesting to use. So I'll try and get by with that.
@Alan K. said:
My God man, the rules call for using a tool you don't especially care for but they don't say you have to suffer for your art. I think that your use of the Coast tool would be just too painful to watch.

I think the way this challenge setup is opened for interpretation, you surely could make peace with a quality you hate, or go wild and really challenge yourself to the max with the crappiest tool you could find. Needless to say, I am so curious to see what's everyone's take away will be after the challenge.
@Sos24 said:
:agree: It will be hard enough using a good or decent tool that you don’t like, but using a terrible tool just seems really painful. After a month of no challenge and using any and every tool I want and love, I’ve actually been reconsidering participating in this challenge. But I still will because using a tool I hate will just make me appreciate the tools I love more.I’m considering using the Kutmaster Minimaster or Swiss Army Evogrip S18. I’m leaning towards the Evogrip, for the reasons you mention. At least the S18 is a good quality tool, it is just that I can’t stand the scales. Whereas the Minimaster is uncomfortable to use, not a form factor I really like (have to open to access any tools) and the tools are low quality that don’t work that well.
How much do you want to endure in the name of a challenge?
That is the Dare Devil question. >:D
I’ve a bit of a love/hate relationship with them… got 3, the plain steel non-painted one scissors seem better than the other two, so I’d better use the worst one for this I suppose

Long time ago, I was gifted a Micra and carried that for a year or two and remembered loving it. Of course, so many years have passed and with a broaden horizon(thanks to MTO), I kinda curious will I still love it like I use to.

@Poncho65 said:
I have always given the Gerber Suspension a hard time
so I may go with the NXT that I bought a while back :ahhhI just watched a youtuber calling it the 'best' cheap multitool...hmm...kinda curious about this one too.

-
Good to hear that I might actually like it :o :ahhh

-
@Poncho65 said:
I have always given the Gerber Suspension a hard time
so I may go with the NXT that I bought a while back :ahhhI carried a Suspension for a few years. It is an okay tool if you don't really know how good a MT can be.
I tried using the NXT, but I could not get past the combo blade and lack of a saw. A short, mediocre saw is better than no saw.
Good luck! -
-
@pipedreams said:
I’m still leaning towards the LM Micra.But why?

-
@comis said:
I think the way this challenge setup is opened for interpretation, you surely could make peace with a quality you hate, or go wild and really challenge yourself to the max with the crappiest tool you could find. Needless to say, I am so curious to see what's everyone's take away will be after the challenge.
I was thinking of either the Coast or the Flik. I've been going back and forth between the two.Let's look at this dilemma again.
The Coast is not a good tool. It looks decent for an inexpensive tool, but it is not. The metal is soft, the tools are hard to pull out, especially the blade. The tools themselves are bad. Scissors, saw, can opener, file, drivers, everything is below average.
Plus, it is heavy (284g - The ST300 is 287g).
Ergonomics are fine, and the tools have individual springs, but who cares?The Flik looks well-designed, but it is not.
Still, it is a usable tool. Despite the mountain of bad decisions, its tools are mostly good enough. Pliers, blades, scissors, drivers. There are still flops like the can opener, but it will at least make an effort instead of being outright useless.So, I guess I will be using the Flik.

I actually like the Coast better. It did not cost much, and it knows what it is. Its flaws are the result of Coast agreeing to put their brand on a cheap product, made by someone who also did not bother.
The Flik, now that's a story worth telling. I will take pictures and finally post my review of the Flik within a week.
-
@Adam5 said:
I carried a Suspension for a few years. It is an okay tool if you don't really know how good a MT can be.
I tried using the NXT, but I could not get past the combo blade and lack of a saw. A short, mediocre saw is better than no saw.
Good luck!I do hate combo blades
:D I haven't 100% settled on that tool but it is a top contender contender sure
We will see :D -
It's looking increasingly liekly that I'll be selling myself to the Rev for a magnet

-
I believe I will go with the Suspension NXT for that month

I
that it has a clip 

The square Phillips accommodates my bit adapter 8)

I am still on the fence about the spring loaded pliers though :-\ and I still hate combo blades :D

-
@ReamerPunch said:

I was thinking of either the Coast or the Flik. I've been going back and forth between the two.Let's look at this dilemma again.
The Coast is not a good tool. It looks decent for an inexpensive tool, but it is not. The metal is soft, the tools are hard to pull out, especially the blade. The tools themselves are bad. Scissors, saw, can opener, file, drivers, everything is below average.
Plus, it is heavy (284g - The ST300 is 287g).
Ergonomics are fine, and the tools have individual springs, but who cares?The Flik looks well-designed, but it is not.
Still, it is a usable tool. Despite the mountain of bad decisions, its tools are mostly good enough. Pliers, blades, scissors, drivers. There are still flops like the can opener, but it will at least make an effort instead of being outright useless.So, I guess I will be using the Flik.

I actually like the Coast better. It did not cost much, and it knows what it is. Its flaws are the result of Coast agreeing to put their brand on a cheap product, made by someone who also did not bother.
The Flik, now that's a story worth telling. I will take pictures and finally post my review of the Flik within a week.
Sounds like you got a 'winner', it'd be interesting to see how your reviews may differ after you use it for a month in the challenge.

@GearedForwards said:
It's looking increasingly liekly that I'll be selling myself to the Rev for a magnet
Please do! :D
@Poncho65 said:
I believe I will go with the Suspension NXT for that month
I
that it has a clip 

The square Phillips accommodates my bit adapter 8)

I am still on the fence about the spring loaded pliers though :-\ and I still hate combo blades :D

I remembered when I first got my Griptillian, I purposedly got a 'combo' edge and I totally bought the "combo edge can always continuous to cut" ideology. But I soon realized how wrong I was buying on all those preassumption, and still haven't warmed up to combo edge till today.

-
@comis said:
Sounds like you got a 'winner', it'd be interesting to see how your reviews may differ after you use it for a month in the challenge.
I already know everything I need.

Flik review is posted:
/topic/87578I doubt a month of carrying it will change my mind. It might change it for the worst.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login