The Farmer X Double Secret Adventure Society
-
@naivuz said:
So I shouldn't see this as a problem. actually I was thinking of sticking it to the liner with a strong adhesive.:DI would recommend against putting adhesive in it. For one thing the issue you would be trying to fix isn’t really an problem. For another, adhesive can have a tendency to stick parts together that should remain free to move.
-
You are right. Thank you very much for dissuading me from this misconception. :ahhh
-
got a green farmer x to replace the blue, which I think I lost on the subway ???. I like this deep shade of green more than the bright blue, hard to capture on photos, it will look good as it fades.


-
Has anyone done victorinox keyring removal? It hurts my hand while using the knife. It also looks very cheap :(
-
Yes - just cut it off, and file it smooth - can be done with hand tools, but a Dremel-style tool makes it a very quick operation.
-
do you have some photos? I want to see the new version.:D I will cut off the excess with a jigsaw or pliers and file it off. :d
-
Here’s one of my PX mods - in this case I cut and smoothed off the part when the knife was disassembled - it uses torx screws and pivots to hold it and the anodised Ti scales together, but I’ve removed the key ring holder on 91mm knives in the past when they were together (no pics of those as they’ve since been sold on) just take care as you go and mask off the alox in case of slips. It’s not as hard as you fear once you get going! Good luck!

-
looks very good. I will cut it first with pliers. then it will be smoothed with p400 sandpaper. and i will get rid of this disgusting keychain :D It hurts hand. And it makes noise. It also doesn't look good quality. It will be better when the process is finished.And it will look more minimalist. Long live minimalism.😅
-
it was clean and perfect

-
Nicely done!
I tend to prefer my alox without the key ring holder too (soldiers, nespresso pioneers, harvesters, technician, etc), but a lot of mine do still have it usually holding a Vic lanyard of a suitable colour! -
I wish I could remove the keyrin holder. Awl makes noise when turning it on and off. rather not Awl. Key holder. I would like to paste it but it is dangerous. No problem other than sound.

-
No action shots, but here's my red FX resting at home after saving another camping trip with its can opener this weekend, after the cheap dedicated manual can opener broke.

-
@nate j said:
No action shots, but here's my red FX resting at home after saving another camping trip with its can opener this weekend, after the cheap dedicated manual can opener broke.Every time I read "who needs a can opener anymore, anyway?" I wonder if we literally live on different planets or something.
-
Thank you for your E-Mail and for your interest in our pocket knives.
The play and noise from the key ring is normal. The key ring is fixed on an intermediate layer. Together with the awl, the intermediate layer run on the same spring. The intermediate layer is needed, as the opposite function (blade) is thicker than the awl.
When you open the awl the spring is in tension - as the spring is pushed back the intermediate layer gets space and play. The play is needed as otherwise the awl would not close properly.
We hope to have helped you with these information and wish you to have a good day.
Victorinox's answer to the awl motion and sound question. I'm ignoring now😅
-
@naivuz said:
Thank you for your E-Mail and for your interest in our pocket knives.The play and noise from the key ring is normal. The key ring is fixed on an intermediate layer. Together with the awl, the intermediate layer run on the same spring. The intermediate layer is needed, as the opposite function (blade) is thicker than the awl.
When you open the awl the spring is in tension - as the spring is pushed back the intermediate layer gets space and play. The play is needed as otherwise the awl would not close properly.
We hope to have helped you with these information and wish you to have a good day.
Victorinox's answer to the awl motion and sound question. I'm ignoring now😅
Well, those things are all 100% accurate.
-
wow... what a detailed answer
-
I sanded the rivets. it was very nice


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
