OPINELS
-
Mine has the matte finish, i didn't know there was a shiny one too

I have been meaning to do this for a long time, #12 Saw and #12 knife into one handle




-
Borg, that's perfect!! Did you take pictures of you modding it?
-
I treated myself and ordered my first special edition, the Jeremyville France model. I think I'm going down the Opinel spydie hole

-
@Barry Rowland said:
Borg, that's perfect!! Did you take pictures of you modding it?Thanks Barry, sorry i didn't take any pictures but basically pop off the collar, grind down the pin and knock it through, remove blade and ferrule then widen the gap to fit two blades, i did slightly more as i added a washer between them but i dont think thats needed, take it easy milling out the handle as you want both blades to sit nicely inside, not one barely in and one so deep you cant see it, refit ferrule and blades with new pin but dont hammer it flat, leave a dome on both sides as thats what holds the collar on and you are aiming for the collar to turn freely but secure in the peening, you will need to fit collar and remove a few times to get it right as it can have forward and aft movement if your peen is too small, collar removal and refitting is a 1 second job with a circlip plier, if the domes on the pin are too small grind it down knock it through, then bin it and redo it, it's the lock so its worth getting right, take a photo of the original pin, thats what you are aiming for
, once happy remove some metal from the bottom of the collar so it turns enough to securely lock both blades, you also need to remove some from the top of the collar as it locks at that point too, you also want the blade flat and straight not nose down, remember to leave enough room for one blade at a time in use locked solid while the redundant blade is also locked solid, slow and steady and don't remove too much at a time 
Oh, and remember to place your blade where you can get to the nail nick ::) thankfully i noticed before peening :D
-
Borg and thanks! -
Thanks Echo, thanks Vicman

-
My first limited edition Opinel, the No. 8 Jeremyville France edition.


-

The No. 08 is great and that LE is particularly nice!

-
Thanks Nix and Vicman! I've been kicking around expanding my small collection, and decided to treat myself. With the exception of the challenges, there's usually a No. 8 or 9 in my pocket along with a small Vic. I absolutely love them.
-
Thanks Echotech!
-
Awesome modding, Borg :o

That is a nice one, Barry :ahhh

-
Thanks Poncho! I think I've finally found a combo of knives that I can affordably collect..Opinel and Vic Classics :D -
How cool is this? A special carving series would sell well.


-
@ReamerPunch said:
How cool is this? A special carving series would sell well.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
that is very cool indeed Borg