Leatherman tool adapter club!
-
@MTSebastian said:
Hey Guys, would it fit on a Gerber MP600 also? Mayby with some modifications?Gesendet von meinem SM-A600FN mit Tapatalk
No I don't think so. Gerber has there own bit adapter kit.
-
Don't think so either, even on the blunt nose ones; the handles/chassis of the Gerber's is wider, hindering it to slip in, and I think that the design (flik versus butterfly) wouldn't allow for proper grip onto the Tool Adapter.
If needed, you can use the Leatherman Removable Bit Driver for Blast, Kick, Fuse, Rebar, ST300 or, as Steve pointed out, the Gerber Tool Kit. Also, the bit driver that most bit kits have from tools like Ganzo and many other cheaper ones will also work.
-
Solidly in this club, have 3 standard adapters with tools (couple PST’s and a Supertool) as well as a UTA that I bought with my TTI many years ago. Latest is a UTA that’s marked “PSNS & IMF PDQ” (Puget Sound Naval Shipyard & Intermediate Maintenance Facility Puget Demonstrated Quality). I assume that a multitool came with the adapter. Don’t know if it was marked by Leatherman or after purchase.
Last two pictures show how to carry twelve bits in the case, the adapter holds them in place. Caution, don’t bang it on the table to find out how well, lol.



-
Great pics, Boonies 8)

-
Having 12 bits in that case is rather handy. Of course you’ll still be missing the right bit when you need it. : 
-
A
for this club as well 

With the new ratchet


Attached to a :ahhh :ahhh :ahhh!!!MINI!!! :ahhh :ahhh :ahhh


-
A couple questions:
(1) Can the new leatherman rachet driver be used realistically with the old adapter like your picture implies? I thought the adapter works only with hex type bits and the rachet-driver with the leatherman flat bit holder?
The setup in your picture looks almost too good to be true :-)
(2) Also are the hex bits for the old adapter standard bits? i.e. if i acquire the adapter without bits, will be able to insert regular bits i already have?Thank you.
@Poncho65 said:
A
for this club as well 

With the new ratchet


Attached to a :ahhh :ahhh :ahhh!!!MINI!!! :ahhh :ahhh :ahhh


-
Takes regular hex bits, even sockets. The ratchet works great in the adapter, can even be used with the adapter alone. This is the setup for an old Supertool....,,



-
with Boonies
Works great 
-
@Boonies said:
Takes regular hex bits, even sockets. The ratchet works great in the adapter, can even be used with the adapter alone. This is the setup for an old Supertool....,,
Thank you! That combo of adapter and rachet is then amazing and i might even say a must have particularly if the adapter fits your favorite lm.
-
I see listings on auction site that have the adapter with two nubs and they are described as “universal” adapters. Based on the earlier posts in this thread, I was under the impression that the smooth/flat version is the universal adapter while nubbed ones are standard adapters.
Do I have it wrong or are the listings inaccurate? -
The listing are inaccurate more than likely

-
I'm in also. The adapter I received appears functional but there's rust inside the angling mechanism (under the adjuster ring). Hope it's strong enough for use. Is it advisable to use say pb-blaster something like this (asking coz it's not just a static surface)?
Also the new rachet fits and should be usable but the rachet is tad wobbly in my adapter. This is normal?

-
Congrats

Use anything on the rust it will be better than nothing

If it is only a little wobble then it is fine

-
I have to uninstall ebay from my phone. [emoji1787]

Sent from my HD1907 using Tapatalk
-
Nice 8) congrats on the PST and Supertool plus both adapters that you have with them

-
I am just a regular dude ;) :D
Well some might even debate that :ahhh

-
Some might, especially after reading you're special in another thread ;) :ahhh

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login