June Pocket Rocket Challenge
-
@cbl51 said:
Soooo, now that the challenge is half over, how many o you have been surprised at how well the little SAK's performed?I’m not surprised but it is good to be reminded just how versatile they are. And that’s so much more than you might think.
But here’s what your question got me thinking (and looking at the small blade on my new Executive). Why 58mm? Why 74mm? Why 65mm Wengers? The small blade on the Executive is smaller than the Classic main blade … is it just design & fit?
Does anyone know why these sizes came about in the first place? Just what is the history of that choice? Clearly Vic and Wenger had similar ideas (though maybe the timing of the introduction of these sizes is relevant to one manufacturer keeping up with a competitor) but why?
-
@Max Stone said:
Nice 50g! I don't have any of the graphing HP calcs, still working up through the older generations
Day 20
After the Orange Alox slipped out my pocket on of sofa, I'm trying a belt lanyard. We've got a road trip coming up in a week, so I really don't want the SAK sneaking off again. It's the first time I'm trying the little metal D-clip, so I can unclip if the chain gets in the way.Today's calculator is a 1979 Hp-67. This was HP's second (and last) pocket calculator with a motorized magnetic card reader. After the 67, HP started to offer continuous memory and plug-in modules for programs, and began to move away from LED displays.

Love the 67 - have a potential deal going for next month,fingers crossed. Apparently they read and write mag strips at a greater density. I assume not backward compatible with 65?
-
@glenfiddich1983 said:
Day 20, in honour of World Refugee Day
Very nice.

-
Day 20.
No uses today, it's been a slow weekend at the swamp.
Found this pic of one of my MiniChamps that decided to wander off somewhere.Been gone for awhile, now, but he's missed.

-
Day 20
Some cool refreshment.

-
@Fast Bill said:
But here’s what your question got me thinking (and looking at the small blade on my new Executive). Why 58mm? Why 74mm? Why 65mm Wengers? The small blade on the Executive is smaller than the Classic main blade … is it just design & fit?Does anyone know why these sizes came about in the first place? Just what is the history of that choice? Clearly Vic and Wenger had similar ideas (though maybe the timing of the introduction of these sizes is relevant to one manufacturer keeping up with a competitor) but why?
I don't know. I'd love to have been in that design meeting....
Engineer 1: "I think the key chain knife should be about 60mm"
Engineer 2: "Gee...that seems big...for a key chain knife...."
Engineer 3: "What about 56mm?"
Engineer 1: "Can we compromise and go with 58mm....?"
-
Day 20
Minichamp took to card writing duty for father's day.

-
**Day 20: **
Found this swivel snap and decided to make a dangler with it. Used a scrap of leather from a bag of old remnants and sewed this up. The belt loop will work with 2" belts or smaller. A Swiss Champ or Outrider clipped to the snap hangs inside a pocket without touching the bottom of the pocket....of the pants I'm wearing today. Not sure about other pants.... :-\
The Esquire's scissors got used to snip the sewing thread, but I neglected to get an action shot.


-
Day 20
Carefully opened a box of spaghetti so I can close it and use the other half later.

-
Those work great buddy! Sure beats having something slide out of the pocket without knowing it

Found this swivel snap and decided to make a dangler with it. Used a scrap of leather from a bag of old remnants and sewed this up. The belt loop will work with 2" belts or smaller. A Swiss Champ or Outrider clipped to the snap hangs inside a pocket without touching the bottom of the pocket....of the pants I'm wearing today. Not sure about other pants.... :-\
The Esquire's scissors got used to snip the sewing thread, but I neglected to get an action shot.


-
Day 20
Nice and slow day. Watching more Star Wars with my son and dancing with my daughter.
The Rambler was called to snip some oregano.

Enviado de meu moto g(6) usando o Tapatalk
-
@Nix said:
Day 19 ( bonus watermelon material ):Fireman ran into this predicament a few days ago, which got me thinking.... ( always a worrisome prospect. )


After having given Barry so much grief over the infamous and shameful Muffincident, I knew I would have to figure out a way to process and eat this melon using just the mighty Esquire. Fireman had only his 58mm to use, but I was armed with a 65mm. I felt I could do it....
And the solution was right there in front of me!


Having used my challenge tool to make a tool, I was ready to take on the melon....

I plunged the Esquire into the melon and cute completely around its equator.....but not very neatly......

The cut at the surface is fairly wide because the ricasso is gouging a fissure in the surface. At first I thought, "Nix..you idiot...." But then I realized that would work to my advantage.
Next, the wooden wedge-knife was pressed into the first cut and slipped around the melon.

The wedge-knife did a good job. Not perfect, but it worked! Once the melon was cut in half, I was able to use the Esquire to cut the halves into quarters by cutting through the rind and then snapping the half into quarters. And so on, into smaller wedges which we greedily shoved into our pie-holes.

Oh, the might Pocket Rocket prevails!

That's was impressive!
Enviado de meu moto g(6) usando o Tapatalk
-
Day 20
The Ambassador accompanied me to the in-laws for Father’s Day feast

-
Pays to be diplomatic at the in-laws.....

-
A classic, a safety pin, and a tangled necklace chain.
After a fathers day dinner with family, my daughter Jessica had the very fine silver chain with a little silver medallion with the engraved image of her pet Boston terrier that died last spring. The knot in the fine chain was very tight, and I used the toothpick and a safety pin to slowly untangle the knot. It took a while, and I had to use the classic blade to whittle a sharper point on the toothpick to get into the tiny links combined with the safety pin I carry in my wallet with the P-38 and Victorinox quatro screw driver.
Once I got some slack in the knot, the toothpick was used to slowly pull the chain out of the tangled knot. All ended well and Jessica was grateful and said it was fitting that on fathers day that I was her hero again. I should be noted that the classic I used was not my own, but Jessica's, as Jess has been a fan of the teeny SAK since her high school days when I gave her a red one. Now she carries the pink breast cancer classic because of her mothers defeat of the cancer she had in 2018.
Again and again, the classic has proved to be able to handle the little everyday odd things that need to be fixed. The necklace commemorating Rocko the Boston is again around her neck. We had a glass of wine to toast both Rocko and the classic.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


