June Pocket Rocket Challenge
-
Day 21:
Wow...this challenge is flying by!
The Esquire was on mail duty today and helped welcome a new arrival.....

Yes, I caught a small dose of Alox Pox. So many great colors to chose from, but it seemed to me that if dropped on the ground, this red might be easiest to spot. Dunno. But red also seems like a natural color for a SAK.

This is my first Alox Classic. My first impression is that it is really small! I didn't do any measuring, but I'd estimate that it is about 66% as thick as a Celidor Classic. And it might even weigh a tad less. I really like it right off the bat.
I've added a pair of tweezers to my keys. This way I won't miss the T&T while out and about.
I'm looking forward to giving this guy some pocket time!
( Hope I can find it in my pocket...... :o)Later the Esquire harvested some parsley to add to lunch. ( Suddenly the Esquire seems to want to be very helpful..... )

I have to say, I've become used to the larger size of the 65mm. Now the 58mms seem a bit small......might have to do another challenge......

-
DAY 21
Esquire still hanging in there,,, though it will need sharpening soon.

-
Sweet Berry Nix!

-
Yes, I caught a small dose of Alox Pox. So many great colors to chose from, but it seemed to me that if dropped on the ground, this red might be easiest to spot. Dunno. But red also seems like a natural color for a SAK.

This is my first Alox Classic. My first impression is that it is really small! I didn't do any measuring, but I'd estimate that it is about 66% as thick as a Celidor Classic. And it might even weigh a tad less. I really like it right off the bat.
I've added a pair of tweezers to my keys. This way I won't miss the T&T while out and about.
I'm looking forward to giving this guy some pocket time!
( Hope I can find it in my pocket...... :o)I may be immune to the Alox Pox, at least when it comes to classics... I'm still not impressed with them with the absence of a Phillips driver. Sure, I guess I could attempt to mod a Rambler to Alox, but I don't have the stuff to try.
My only option is Alox MiniChamps. They're even getting hard to find on eBay though.
-
@PitCarver said:
I may be immune to the Alox Pox, at least when it comes to classics... I'm still not impressed with them with the absence of a Phillips driver. Sure, I guess I could attempt to mod a Rambler to Alox, but I don't have the stuff to try.
My only option is Alox MiniChamps. They're even getting hard to find on eBay though.That's pretty sweet looking!

-
@Max Stone said:
Sweet Berry Nix!
Thanks, Mr Max!
The split ring of the keychain attachment seemed too thick to me. ( I've ground many a keychain attachment point off a Celidor Classic. )
I pulled the ring off and added a small lanyard. The Alox Classic seems thin enough to me that a lanyard might be helpful in keeping a decent grasp on the knife while getting a blade open. It may be that with some more experience that I'll decide to file off the attachment point, too, but for now it is a tiny lanyard.

-
@PitCarver said:
I may be immune to the Alox Pox, at least when it comes to classics... I'm still not impressed with them with the absence of a Phillips driver. Sure, I guess I could attempt to mod a Rambler to Alox, but I don't have the stuff to try.
My only option is Alox MiniChamps. They're even getting hard to find on eBay though.You are a lucky man!
I myself have not found the phillips driver to be of use. I understand it might be of use, but that has never been my experience.

Alox Classic, Alox RamblerI am tempted by the Alox MiniChamp. That seems like a right useful tool!

-
@cbl51 said:
A classic, a safety pin, and a tangled necklace chain.After a fathers day dinner with family, my daughter Jessica had the very fine silver chain with a little silver medallion with the engraved image of her pet Boston terrier that died last spring. The knot in the fine chain was very tight, and I used the toothpick and a safety pin to slowly untangle the knot. It took a while, and I had to use the classic blade to whittle a sharper point on the toothpick to get into the tiny links combined with the safety pin I carry in my wallet with the P-38 and Victorinox quatro screw driver.
Once I got some slack in the knot, the toothpick was used to slowly pull the chain out of the tangled knot. All ended well and Jessica was grateful and said it was fitting that on fathers day that I was her hero again. I should be noted that the classic I used was not my own, but Jessica's, as Jess has been a fan of the teeny SAK since her high school days when I gave her a red one. Now she carries the pink breast cancer classic because of her mothers defeat of the cancer she had in 2018.
Again and again, the classic has proved to be able to handle the little everyday odd things that need to be fixed. The necklace commemorating Rocko the Boston is again around her neck. We had a glass of wine to toast both Rocko and the classic.
You are such a great storyteller. Sounds like a great Father’s Day.
-
Day 21

Sent from my iPhone using Tapatalk
-
Day 21
Unscrewed an old HDD

-
Day 21
“What in the world is that?” You ask.
Its a raisin that I extracted from a packet with the help of the classic.

-

@ElevenBlade said:
Day 21“What in the world is that?” You ask.
Its a raisin that I extracted from a packet with the help of the classic.
-
**Day 21
**
Mission: Tighten the hex screws holding together the Adirondack chairs on my deck.Equipment: Mini Champ with hex bit coupler on the combo tool. (The black strip to the left of the combo tool is a hard rubber shim.)
Disclaimer: I have to admit that the hex bit coupler moved to the inline Phillips on the Swiss Champ for final tightening. More torque than I felt comfortable putting on the Mini Champ.
Follow-up: This all got me thinking about portable hex bit capability. The hex bit coupler on the 58mm combo tool and the 91mm inline Phillips works pretty well. But a couple of the chair screws were close to other parts of chair, making it hard to get the SAK in, especially the wide Swiss Champ.
So inspiration struck and I used my Dremel to file down two edges on a hex key so it would slide snugly into the bit coupler without spinning. I did both ends of the hex key, so I've got length and torque. (See second photo.) Fits nicely into my pocket EDC kit, where I also keep the bit coupler and a few bits.
Disclaimer #2: For anyone trying this at home, my hex bit coupler is an odd-ball one I got with a Winchester multi-tool with a hex bit kit, though I've also seen the same kit with Gerber and no-name multi-tools. It's smaller than a standard 1/4 inch drive. A standard 1/4 inch drive-based coupler should do the job with a bigger shim and hex key.


-
@ElevenBlade said:
Day 21“What in the world is that?” You ask.
Its a raisin that I extracted from a packet with the help of the classic.
I was really hoping that it wasn't ear wax...

-
Day 21 late post.
Intense day, but with no uses for a SAK (a rare thing)
So, little Groot asked for a picture with minichamp
Enviado de meu moto g(6) usando o Tapatalk
-
@SteveP said:
**Day 21
**
Mission: Tighten the hex screws holding together the Adirondack chairs on my deck.Equipment: Mini Champ with hex bit coupler on the combo tool. (The black strip to the left of the combo tool is a hard rubber shim.)
Disclaimer: I have to admit that the hex bit coupler moved to the inline Phillips on the Swiss Champ for final tightening. More torque than I felt comfortable putting on the Mini Champ.
Follow-up: This all got me thinking about portable hex bit capability. The hex bit coupler on the 58mm combo tool and the 91mm inline Phillips works pretty well. But a couple of the chair screws were close to other parts of chair, making it hard to get the SAK in, especially the wide Swiss Champ.
So inspiration struck and I used my Dremel to file down two edges on a hex key so it would slide snugly into the bit coupler without spinning. I did both ends of the hex key, so I've got length and torque. (See second photo.) Fits nicely into my pocket EDC kit.
Disclaimer #2: For anyone trying this at home, my hex bit coupler is an odd-ball one I got with a Winchester multi-tool with a hex bit kit, though I've also seen the same kit with Gerber and no-name multi-tools. It's smaller than a standard 1/4 inch drive. A standard 1/4 inch drive-based coupler should do the job with a bigger shim and hex key.
Like that Hex key adaptation!

-
Day 21
Alox classic on duty today (I could understand how one could come down with the pox), cut down some antihistamines to throw in my booboo kit (I go through 2-3 'one a day' tablets per real life day, smurf you summer). It then supervised the ordering of some prime day Amazon goodies that will arrive tomorrow


-
Day 2
The Manager… managing…

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
