June Pocket Rocket Challenge
-
@Barry Rowland said:
I envy you that experience Phil!!

I consider myself very lucky Barry and had booked about a year in advance. Mind you I managed to clamber inside a Lanc in a museum many years ago whilst on honeymoon in Canada, somewhere near Calgary if memory serves, and took my wife to an airshow outside Vancouver for an encore ...
Anyway .. Day 23 and more post opening with my Lemons Classic.

-
@MichaelGT83 said:
Day 23Usual grooming/envelope writing, so decided to test the two screwdrivers out. The top screw won't be shifted by either, the bottom moved fairly easily.


Good job

-
@Steelej1976 said:
I have debated this too. The Classic SD can handle so much that I sometimes wonder if carrying my Climber is overkill at times and I could get away with my Classic SD and Case Medium Jack knife. The 91mm scissors and the bottle cap opener (that I use as a mini pry bar) are the only thing that stops me from doing that. I would miss the pin also on the Climber and I have used the hook quite a bit too but I could always throw a safety pin in my wallet and the hook I could live without if I had too. This is a great thread!
What to carry is always an interesting discussion.

I must be in the minority as I don't have a "standard" EDC. It changes based on where I'm going and what I'm doing.
For example, at home I carry my Mini Champ and an Explorer. They complement each other with small and large tool sizes, and the Explorer adds the magnifier that I use regularly. I'm in a house full of tools if I need anything more elaborate.
When I'm out or working in the yard, I'll take the Mini Champ and my Swiss Champ. Again, the complementary tool sizes, plus adding in more stuff with the Swiss Champ so as to be more self-sufficient. (Like the wood saw - very handy when doing yard work.)
When I'm "dressed up" so that a 91mm hanging off my belt or even from a suspension clip in my pocket would look out of place, I go solo with the Mini Champ with M2 SeberTool pliers attached.
If the clothes allow it, I'll also have my pocket EDC kit with a hex bit coupler and a few bits, mini pry bar, magnet, some paracord, and a few other handy odds and ends, in a 2.5 by 4 by 1 inch sleeve. Though if that would create an unsightly bulge in dress pants, I can probably sneak it in a jacket pocket or bag.
I'm in a suburban environment so not going to need the same survival EDC stuff as someone primarily in a rural or remote area.
Always interesting to hear what other folks carry and to get ideas.
-
Have you seen the RAF scaled Classic? It's on my list :D@Fast Bill said:
I consider myself very lucky Barry and had booked about a year in advance. Mind you I managed to clamber inside a Lanc in a museum many years ago whilst on honeymoon in Canada, somewhere near Calgary if memory serves, and took my wife to an airshow outside Vancouver for an encore ...Anyway .. Day 23 and more post opening with my Lemons Classic.
-
@glenfiddich1983 said:
Day 23, a whole bunch of them
That's impressive!

-
<u>Day 23</u>


It's been a pretty long day filled with many hours of meeting, luckily I do have a healthy stock of funky snack to keep me up and going. Here Rambler helped open a bag of Curry fish skin snack, and it does taste like seafood curry!
-
DAY 23
Lunch time in the truck,,, a slider with pimento cheese. The Esquire got it sliced,,,, but barely.

-
DAY 23 Skinny Minny is a baaad SAK. At least at the sheriff's office, where my wife needed to go to get fingerprints for work. Mini waited in truck in order to avoid incarceration.

-
Day 23
Opened two packages today at work. One with scissors and one with the blade

-
Day 23
The Mini Champ welcomed the newest arrival - a used Explorer I found on eBay. Can never have too many!

-
-
Day 23
Posting earlier in the day so I don’t lose track of time and am late again.The Classic opened and broke down a couple boxes. It also cut the tag off a new emergency blanket/tarp


-
No worries Sherry. Things get crazy!
-
Day 23
Busy day but the Orange Alox had the day off. Here relaxing with a 1988 HP-11C, The first HP calculator to have a backspace key. You can still find used ones on Amazon, 30+ years after production ceased.

-
Day 23
How about a minichamp with a mini bit driver?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


