Showcase: Mods to plier-based multitools
-
Here is my modified suspension NXT.
I replaced the awl with the saw from a suspension. I also ground the inside of the handles for more clearance, and was able to add a fourth thin tool - the eyeglass driver, using thin washers from an MP600. Without grinding the inside of the handles you can still do the mod, you just can’t have ANY washers in there. I didn’t like that at all.
I removed the plastic bits before grinding, which was really easy. I also took the opportunity to bend and straighten the handle so it lines up correctly with the other side. Overall the tool is much better now. Better toolset, even without an awl. I often need an eyeglass driver. I occasionally need an awl too, but this one is kinda crappy to begin with, and I think the blade does near as good a job as the awl in making a hole.
While I was playing around I fit some suspension tools in a spare mp400 body, and ended up with two long tools in one handle. Normally impossible, but the eyeglass driver is thin enough to make it happen. And the long 2.5D suspension driver actually seems pretty “right” in the lighter duty MP400 tool. Using these two suspension tools definitely allows a larger tool load out. The other handle can have scissors or a suspension saw, then a load of flat drivers, for a nicely equipped bladeless tool.
Charles.



-
Tool Name: Style bladeless
Basis: Leatherman style CS
Aim: make it bladeless, add more useful (to me) functions
Mods: Replaced the knife blade by a Gerber Dime package opener and a glasses screwdriverNot a very involved mod, I just reprofiled a Gerber Dime package opener to make it work in the Style, and since the blade housing is quite deep I managed to stack a glasses screwdriver (from a cheap Squirt clone) next to it.
-
Very nice work Combo!

I used a bit of my retirement time to mod a quarter inch drive to my Skele...works like it should in a pinch.


-
Tool Name: Gerber Dice
Basis: Gerber Dime & Splice
Aim: give the Dime better scissors and improved tools
Mods: Replaced the plier head with the scissors from the Splice (it's a drop-in). Replaced the butter Phillips/file in the Dime by the marginally stronger one from the Splice, added the jeweller screwdriver from the Splice (both require a little reprofiling of the tools around the pivot). Added the Micra nail file (more reprofiling and requires a bushing, for which I used the Micra pivot). Kept the excellent package opener, shuffled tools around to make everything fit and added a few nail nicks. -
Tool Name: Juice EBTK (everything but the knife)
Basis: Leatherman Juice XE6
Aim: make a slimmer bladeless tool to complement a knife, or to carry in places where blades aren't allowed
Mods: just removed the two blade layers. I kept one side naked but I thought the other side looked mismatched with one full handle (with the corkscrew) and one skeletonized, so I put one aluminium scale and polished it to try and match the appearance of the stainless steel as well as possible (read: not so much). The main advantage is that the handles are now of equal thickness (Juice owners know what I'm talking about).
In the end I didn't use it much so I restored its full tool complement (but kept one naked side). -
Tool Name: it doesn't really have one yet, suggestions are welcome (no Tooly McToolface please).
Basis: Gerber Clutch and Gerber Mini-Suspension-S (same construction as the Shortcut with slightly more rounded scales).
Aim: my take on the pliers+scissors combo tried elsewhere.
Mods: The two tools are held by M3.5 screws instead of pivots. The countersunk screw heads facing each other in the middle have been cut in place, hence the rough look (but the tool closes fine). -
Some beautiful mods, sometimes on rarely seen tools

Thanks for sharing
-
Here’s a quick little mod for the SOG power pint. I wanted a real flat driver and the bottle opener obliged after a little grinding.
Charles.

-
I have modded a couple of my Leatherman tools. I didn't specifically designate them a new name though.
The Wave has been modded to the specs of a Wave+ (plus the 154cm main blade). Also the wood saw has been replaced with a Victorinox scissor and the Wave scissor with an awl I made from the medium screwdriver.
The Charge Ti started its life as an older model Charge ALX and has been gradually upgraded. 1st the main blade was swapped to a S30V blade, then the pliers have been swapped with a Rebar. Later the Victorinox scissors moved in and the Rebar also donated the awl. And when I got the Titanium scales for cheap on the bay, I replaced them too.
The old Surge was updated to the specs of the new surge, scissors, multiblade holder and pliers head moved in. The frame and the plier head had to be modified a bit to make the new tools fit. Both surges now have the big and the small bit holder (the only mod to the new surge).
The silver Super Tool 300 has the saw replaced with the multiblade holder from the old surge. It also now houses a pair of wave scissors and a big bit holder from a surge, therefore the file had to go. [emoji2373]
The black Super Tool 300 only received a pair of scissors from a Wave.
Finally the silver Rebar donated the pliers head and the awl to the Charge Ti, it got the scissors in return.
The black Rebar received the scissors from a black wave.I also added pictures of my original Supertool, PSTII and original Wave. Those tools where all purchased during deployments, the Supertool and the Wave even got engraved.
The rest of the tools, a wingman, OHT, MUT, Juice Pro and Micra aren't modded.
The holsters are for the two surges (top row) and the wave+ and charge ti (bottom row).I hope you like them. [emoji41][emoji106]







Gesendet von meinem Pixel 5 mit Tapatalk
-
Some excellent pics and modding Berndstein 8)

-
I've finally managed to replace the micro-driver on my Wave+ with an awl that I'm happy with.
I ground down a flat driver from an old Sidekick into an awl that has roughly the same blade length (actually slightly more) than the Victorinox SwissTool's awl, yet still fits the Wave+ WITHOUT interfering with the plier rest tab. If you look closely, you can see a half-circle divot near the bevel, which is the remnant of the flathead driver quick-identification marking that the Sidekick's drivers have.
It turns out that the Sidekick driver is a better shape for awl conversion than the Wave/Charge/Rebar/Blast/Fuse/Kick/Bond/etc. standard large flathead driver because the retrieval tab is located much closer to the pivot on the Sidekick driver, allowing for a longer awl blade (by which I mean, the blade can be inserted deeper into holes before the retrieval tab interferes) relative to the overall tool length.
I did have to grind the retrieval tab flush with the rest of the tools in order for the handles to close all the way.

.jpg)


-
Hey folks, let me introduce you to KickStart. My first entry into modding multitools after drooling over the images in this thread constantly, enjoy the eye candy!
Incase anyone is wondering, the background is a US Army issue blanket that was my father's when he was in.
Higher resolution image: https://imgur.com/a/2ivUODa

-
Excellent mods fellas !

-
Tool Name: Leatherman HardCore
Tool Basis: Leatherman Core
Aim: to adapt the tool set to my EDC needs
Mods: acid etched the handles; acid etched the plier head and then sanded the the polished surfaces to leave the black oxide in the recesses; reprofiled the PE blade to Wharncliffe shape; replaced the SE blade with prybar cut down to fit in handles; removed lanyard and small straigh screwdriver; installed large bit holder from a Surge; ground a chisel edge on the medium straight driver and also ground a wire stripper edge on the shaft of the driver; sharpened the can opener to function as a package opener also
Links: /topic/88061

-
-

What acid did you use for the BO ?
-
Tool Name: Rebar EX
Tool Basis: Leatherman Rebar
Aim: To adapt the toolset to my EDC needs
Mods: Removed lanyard, Phillips driver, awl, and some washers. Installed Surge large bit holder, Ozark Trail Multiforce scissors and can opener, Bercol awl. Modified large straight drive into a chisel, medium straight driver into package opener and scraper.
Link: /topic/88311
-
Tool Name: Knifeless PST
Tool Basis: PST
Aim: To adapt the toolset to my EDC needs
Mods: Acid etched handles with ferric chloride, added pocket clip, reshaped knife blade into awl, removed existing awl and file and replaced them with Ozark Trail Multiforce scissors and diamond file
Link: /topic/88245

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login