Klein-Blackfire Hybridization
-
Once, there was this guy named Klein:

One night, he decided go out on the town. He eventually found himself at a popular nightclub and met a hottie whose name was Blackfire:

They hit it off, and eventually found themselves back at Klein's place. One thing led to another:


Some months later, there was born a new MT:

However, Klein and Blackfire did not know that they were actually related. Blackfire's makers are the outdoor division of Klein Tools. Alas, as can happen when close relatives have offspring, the child was born with some deformities:

What typically would have been a file was a file/scraper/pipe reamer:

The Robertson driver did not fully developed and was shaped like an awl:

The bottle opener had sharp edges like a package opener:

What should have been a knife was instead some weird wood saw:

Fortunately for the poor thing, an electrician took notice of it and plans to carry it every day. Hopefully all will turn out well for this poor mongrel.
-
Mutant Ninja Klein Tool

-
Great post man
Love the post-coital shot. -

Great mods

-
Brilliant!
-
Wow good job here!
always love to see mix and matches. That bit driver is by the the best I have seen on a MT. 
-
Now for a more in-depth description of what I did and why:
I had owned the Klein multi tool for several years without making much use of it. It wasn't because I didn't think it was any good. Though sparse in features, everything felt (or seemed to be) well-built. However, it did not come with a belt sheath and the thing is waaay too bulky to pocket carry. So I stuck with my Suspension for everyday use and only used the Klein for its knife when dealing with large wire.
After seeing Sam Lim's Leatherman Kore mod, I knew I wanted to do something with the plier head. I even bought a well-used Core to copy what Sam did. But then I took a good look at my Blackfire and decided it would receive the Klein hybrid plier head. Since the two MTs are cousins, I figured it would not be difficult to drop the Klein head into the Blackfire handles. Then I would have a more useful MT for work. Great plan


It was not a straight drop-in:

Picture taken after I had started grinding on the Klein plier headThe Klein needed to be modified to match the Blackfire so that the stops(?) would fit into the notches when squeezing the handles to prevent collapsing. I botched this a little, so there isn't much snap when opening the handles. But the stops do engage with the notches so that the handles can be squeezed hard with no collapsing. I did learn that my rotary tool with cut off wheels is a better tool for this work than my Work Sharp, so I feel that I will be better at this sort of thing in the future.
That is not the end of it. The Klein pivots are also closer together. That meant the handles touched together at the pivot end when folding up the tool while leaving a considerable gap at the other end. That meant I had to grind the handles to close the gap:

The modified MT next to an unmodified BlackfireEven after grinding the handles, there is some gap. Removing it completely would require reshaping the plier head to some degree, and I do not want to do that. I'll live with the gap:

The Blackfire has a heavy duty bit driver, a good spear point knife, a bottle opener, a shortish file, and a Robertson driver. I am not sure why an American MT has a Robertson driver. Perhaps the design team had some Canadians. Anyway, the bit driver is a big plus for me. And if I carry a #2 Robertson (square) bit with me to go in the bit driver, then the Robertson driver is unnecessary. Furthermore, a bottle opener and a short, mediocre file do not help me much. So, since I had already modified the plier head and handles and since I had a head full of Sam Lim mods, I decided to convert the non-useful tools into useful tools. So the Robertson driver became a robust awl, the bottle opener became a package opener, and the file can also be used as a scraper and conduit reamer.
As for the knife, it is good, but I carry a knife with me that suits my needs better than it can. And my favorite tool on a MT is a saw capable of cutting drywall. So, I modified a thick Diablo reciprocating saw blade to replace the knife. It locks in-place via the existing liner lock.
My hybrid MT now has a permanent place in my tool pouch, but I am not done with modding it. I tried to install a metal cutting file blade with liner lock next to the drywall blade, but failed on my first attempt. But I believe I have that figured out and will give it another try. Also, I am going to try to drill/tap 6-32 and 8-32 shearing holes (if I screw up the plier head, I have another one I can mod and use). Finally, I hope to incorporate the tweezers from the Klein MT into the hybrid MT.
-
@Sam Lim said:
Wow good job here!
always love to see mix and matches.Thanks! You are the inspiration and guide for this mod.
@Sam Lim said:
That bit driver is by the the best I have seen on a MT.
Yes! I like both the Klein plier head and the Blackfire bit driver a lot and wanted them in the same MT.
-
wow, this is great!

-
Thanks Steve and RP!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login