Do most knives need points?
-
:D
@ElevenBlade said:
Ive been fidgeting with a Gerber Armbar, which has a sheepfoot blade. It's slowly been growing on me.I've had a long affair with tanto and sheepfoot blades in the past. 2 years ago I threw out two of my unserviceable wharncliff blades.
Having spent the better part of two decades with Leatherman and Victorinox, I'd lost any feeling that a sheepfoot blade is particularly advantageous.
This thread, combined with some research on Tradional British pocketknife styles has me curious once again to try them out.
Not so fast though... I'll be waiting for the September SAK-alike Challenge.

-
@SgtTowser said:
Thank you, sir!!!!It makes sense. Have you tried it? Does it work?
Maybe this is where Emerson got his idea for the wave?
They actually work quite well.I had a few with that style of blade and they all readily opened once you got the hang of it.I found that they worked best if you trousers had a reinforced section on the outer seam such as you find on denim jeans.They will also work on a pocket lip but it can be a bit awkward.
Here is another I had posted before with not one but three points. A one armed man's knife made by the Press Button Knife Co.just before 1900.This one is etched with:"Compliments of the A.A.Marks Co. Newark New Jersey Makers of Artificial Limbs" Supposedly these were given free of charge to veterans of the Spanish-American War of 1898 who had lost a hand or an arm in battle. It opened by pressing the button in the front bolster.The curved blade allowed food to be cut with a rocking motion and then the three points acted as a fork to pick up the food from the plate. As an aside the aluminum used in the fancy handle was literally worth more than gold at the time. This was due to the difficulty in mining the bauxite from which aluminum is made.Once a less expensive method was found to mine it,the price dropped drastically.

-
That's a cool one Ray !

-
Ray.

As always the depth of your collection is such a treat. Thank you for sharing pics and information.
-
Here is another factoid that makes me wonder if knives with points are relevant to EDC.
Despite not needing a pointed knife, I wanted a Sinkievich design and found a new Kershaw Atmos for next to nothing, as it circles the drain of discontinuance. I found no Sinks with square ends.
I opened the Kershaw box and for some strange reason skimmed the factory directions and disclaimer boiler plate.
It indicates that Kershaw folding knives are specifically designed NOT to be stabbed with, or pried with. By inference, I reckon they must not be designed to fight with. Kershaw says they are designed to be cutting tools only.
So: whether or not this were legalese to esculpate them from lawsuits, they nevertheless explicit state that their knives are not designed to tolerate the kinetic forces of puncturing and prying.
So: why are they putting points on their knives at all?
Possible Answer: mostly ornamental style, maybe?
If I stab my box of cereal to start my cut to open the top, it appears I would be using my nice new Sinkievich Atmos outside its design envelope. It was not designed to puncture...just cut.
And it is VERY SLICEY.
But who needs a point for Slicey?
Ornamental tail fins lasted a very short time on cars.
Pointed Knive have been the prevalent form factor since cave person days.
Hmmmm.
-
I carried this Navy Knife for 6 months as my EDC. I went back to a point, specifically a spear point blade. I prefer it. You can use the tip of the sheepsfoot to pierce but it's not as comfortable an angle and I can use the tip of the spear to tease stuff open in a way which I can't with the flat point. I used to enjoy clip blades but more for the look than the need for the thinner tip.

-
@pomsbz said:
I carried this Navy Knife for 6 months as my EDC. I went back to a point, specifically a spear point blade. I prefer it. You can use the tip of the sheepsfoot to pierce but it's not as comfortable an angle and I can use the tip of the spear to tease stuff open in a way which I can't with the flat point. I used to enjoy clip blades but more for the look than the need for the thinner tip.
How much do u want for your NAVY KNIFE? 😀
Just kidding.
Thanks so much for responding. Your sound reasoning will help a lot of persons.
I wish I were one. 🤪
Is it a 3.5” or a 3” blade? I have a an original 3.5” WWII version in roughly ground condition that I nevertheless love and that in part inspired the thread.
For what it’s worth, I tried a 3” post war rope knife in good condition and did not carry it more than one day before deciding it completely missed the mark. The extra half inch of cutting edge makes a huge difference in use.
I tried a non swayback and it too completely misses the mark.
I like Ken Onion knives and he did a contempo swayback, but the blade is not a square end. Wrong!
Serge Pachenko recently got a lot right with his clever collection, but they are way short on cutting edge.
Custom knife makers make some, or would, but their prices are only good for them, not for me. I don’t doubt they put even more time into their fine knives than they bill for. I’m just not their target market.
There are a million cleaver flippers and thumb stud razors, but they are mostly not sway backed, or too short, or to thin at the spine.
And when I saw even my current designer gold standard—Marcin Slyzs—go Wharnie on his otherwise exceptional swayback for Spyderco, I went into a knife equivalent of Quarantine Stress Disorder and began to stay in bed—manifesting signs of knife market stress trauma.
Artisan Blades teased me with a 4 inch coping blade (thick spine, concave grind in good steel) that they IMHO mistakenly called a cleaver, but then they attached it to a pointless tactical handle instead of a swayback.
Few seem to get a coping blade works best with a swayback back unless you want to use your coping blade as a meat cleaver and doa lot of round house pounding cuts on a rack of lamb.
Few seem to get that a thick spine and a concave grind are great for heavy duty drag slicing. If I want to julienne some vegetables, I will get get a Robert Herder high carbon paring knife, not a cleaver or a razor.
You see, I am in a swayback 3.5” coping blade desert.
But like Paul Newman in Hombre, I have no choice but to cross the desert to escape the gaggle of silly folding meat cleavers in my wake. And I can cut it.
Well, maybe.
But now the good news...
Either way, you know what you like and you found a spear point that works for you, and that’s all that matters.
I used to carry Champion and then Swiss Champ in SAKs “sort of” satisfied, til I got my Cybertool L and now my yearnings for another SAK are over. Period. Even if they come out with something better (and they will), I don’t need anything better. Well, if they add an integral ratchet and some cool way of carrying more driver heads, I might consider it. 😂
It happens. A person finds the right knife for himself. He may have some affairs with other knives, or he may have a permanent knife mistress, or he may practice cutlery polygamy. But blessed are those that find their perfect match. Cybertool L is mine in SAKs.
So: Now I am questing after the right square end swayback with a 3.5 inch long blade with coping blade spine like my Coast Guard Camillus. I see old Cammies now all the time on E-Bog, but so far there is always something lacking, too much blade play, cracked wood, too many scratches, silly pricing, or silly competition, etc.
And a part of me hopes for a great contemporary expression of this old style of knife.
I ain’t no hard core primitive. Just a discerning old coot.
Still nothing else will do. A swayback with 3.5” square end in good condition—not needing mint. Brass liners. Ideally I would like it to be one handed with a Walker lock.
Spear points are my favorite looking blade profile right now, so I can empathize with you a bit, but my Cybertool L has the point probe thing covered six ways from Sunday on not one but two blades and an awl and a cork screw. Since I’m already covered on point probe: I think to myself— if I only want to look at a knife, I would just buy a picture of a spear point by Ray Laconico, probably, and frame it.
But I want a swayback square end user to complement my CTL.
A barehead or teardrop easy open just will not do.
We make our own hells and must live in them with dignity until we can resolve them.
Very tough to find a swayback with a coping blade at 3.5” at a right price; that’s the gist of it.
-
@SgtTowser said:
How much do u want for your NAVY KNIFE? 😀Just kidding.
Thanks so much for responding. Your sound reasoning will help a lot of persons.
I wish I were one. 🤪
Is it a 3.5” or a 3” blade? I have a an original 3.5” WWII version in roughly ground condition that I nevertheless love and that in part inspired the thread.
For what it’s worth, I tried a 3” post war rope knife in good condition and did not carry it more than one day before deciding it completely missed the mark. The extra half inch of cutting edge makes a huge difference in use.
I tried a non swayback and it too completely misses the mark.
I like Ken Onion knives and he did a contempo swayback, but the blade is not a square end. Wrong!
Serge Pachenko recently got a lot right with his clever collection, but they are way short on cutting edge.
Custom knife makers make some, or would, but their prices are only good for them, not for me. I don’t doubt they put even more time into their fine knives than they bill for. I’m just not their target market.
There are a million cleaver flippers and thumb stud razors, but they are mostly not sway backed, or too short, or to thin at the spine.
And when I saw even my current designer gold standard—Marcin Slyzs—go Wharnie on his otherwise exceptional swayback for Spyderco, I went into a knife equivalent of Quarantine Stress Disorder and began to stay in bed—manifesting signs of knife market stress trauma.
Artisan Blades teased me with a 4 inch coping blade (thick spine, concave grind in good steel) that they IMHO mistakenly called a cleaver, but then they attached it to a pointless tactical handle instead of a swayback.
Few seem to get a coping blade works best with a swayback back unless you want to use your coping blade as a meat cleaver and doa lot of round house pounding cuts on a rack of lamb.
Few seem to get that a thick spine and a concave grind are great for heavy duty drag slicing. If I want to julienne some vegetables, I will get get a Robert Herder high carbon paring knife, not a cleaver or a razor.
You see, I am in a swayback 3.5” coping blade desert.
But like Paul Newman in Hombre, I have no choice but to cross the desert to escape the gaggle of silly folding meat cleavers in my wake. And I can cut it.
Well, maybe.
But now the good news...
Either way, you know what you like and you found a spear point that works for you, and that’s all that matters.
I used to carry Champion and then Swiss Champ in SAKs “sort of” satisfied, til I got my Cybertool L and now my yearnings for another SAK are over. Period. Even if they come out with something better (and they will), I don’t need anything better. Well, if they add an integral ratchet and some cool way of carrying more driver heads, I might consider it. 😂
It happens. A person finds the right knife for himself. He may have some affairs with other knives, or he may have a permanent knife mistress, or he may practice cutlery polygamy. But blessed are those that find their perfect match. Cybertool L is mine in SAKs.
So: Now I am questing after the right square end swayback with a 3.5 inch long blade with coping blade spine like my Coast Guard Camillus. I see old Cammies now all the time on E-Bog, but so far there is always something lacking, too much blade play, cracked wood, too many scratches, silly pricing, or silly competition, etc.
And a part of me hopes for a great contemporary expression of this old style of knife.
I ain’t no hard core primitive. Just a discerning old coot.
Still nothing else will do. A swayback with 3.5” square end in good condition—not needing mint. Brass liners. Ideally I would like it to be one handed with a Walker lock.
Spear points are my favorite looking blade profile right now, so I can empathize with you a bit, but my Cybertool L has the point probe thing covered six ways from Sunday on not one but two blades and an awl and a cork screw. Since I’m already covered on point probe: I think to myself— if I only want to look at a knife, I would just buy a picture of a spear point by Ray Laconico, probably, and frame it.
But I want a swayback square end user to complement my CTL.
A barehead or teardrop easy open just will not do.
We make our own hells and must live in them with dignity until we can resolve them.
Very tough to find a swayback with a coping blade at 3.5” at a right price; that’s the gist of it.
I sold it a long time ago. The wood (old barn oak) was untreated from the factory and so soft a fingernail could mark it. After 6 months it was a wreck. I restored it to new condition by sanding out all the marks then stabilizing the wood with a mixture of linseed and tung oils to harden it but I hate having to do that kind of thing. If I wanted a hobby project I'd have bought one, this was supposed to be a knife off the shelf. I also missed having a point and I kept rounding off the 'tip' which on a knife like this does almost all the work when cutting on a flat surface. Having a spear/clip blade means that there is belly and more of the actual blade is working into the cut on a flat surface (food/hobby, etc).
In any case the knife was a 2.8" ish blade. Wouldn't have suited your uses. I'm the kind of person who uses the small blade on their SAK far more often than the main blade.
-
@pomsbz said:
I sold it a long time ago. The wood (old barn oak) was untreated from the factory and so soft a fingernail could mark it. After 6 months it was a wreck. I restored it to new condition by sanding out all the marks then stabilizing the wood with a mixture of linseed and tung oils to harden it but I hate having to do that kind of thing. If I wanted a hobby project I'd have bought one, this was supposed to be a knife off the shelf. I also missed having a point and I kept rounding off the 'tip' which on a knife like this does almost all the work when cutting on a flat surface. Having a spear/clip blade means that there is belly and more of the actual blade is working into the cut on a flat surface (food/hobby, etc).In any case the knife was a 2.8" ish blade. Wouldn't have suited your uses. I'm the kind of person who uses the small blade on their SAK far more often than the main blade.
Yup, u were in knife hell for sure at 2.8 square end easy open. It was Jack of none and master of none.
I really like the soft wood handle on mine. It is crucial to controlled cutting for me. It helps my hand feel what is happening. Dont mind the dents. Mine is even missing a chunk and I like it even better. It’s a familiar landmark in my palm. I know where is am on the handle. No sharp edges on the handle. Everything I like about it was wrong for you. That’s part of what fascinates me so much about knives and users.
-
Opened some new hairbrushes today for my wife and daughter. The hairbrushes were zip-tied into the package. The clip point blade of a Buck 301 stockman made short work of the zip ties.
Could this task have been accomplished with a blade that didn’t have a point? Perhaps, but having an acutely pointed blade that slipped easily into the small gaps between the zip ties and the hair brushes made the job easy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login