*** The Dean51 30-day ***
-
Retro Fuzz Day 7
I was inspired by NutSAK's beautiful image yesterday to polish up a couple of old 70s Cases... They do polish up rather well, don't they?

I've managed to not buy any Trads this year so far, but last night I caught myself trawling through both the Bay and AAPK looking for old Queens... all because of this bloody challenge! :ahhh
-
Yes, they do! That swell-center, split-back whittler is especially lovely. -
Day 7:
To quote Mr James: ’Many miles on these old roads. Many miles ahead..’:

Sent from my iPhone using Tapatalk
-
Bullwinkle J. Moose is loose!


Y'all are killing me with the stag GEC's. I've never really given them much thought,, but now that I can't easily buy one,,,, I'm really wanting one.
@old Lefty said:
Day 7:
To quote Mr James: ’Many miles on these old roads. Many miles ahead..’:

Sent from my iPhone using Tapatalk
That is a way cool picture,, and fine looking knife!!
-
Day 7.
Staying with the Sodbuster today. 8)

-
@old Lefty said:
Day 7:
To quote Mr James: ’Many miles on these old roads. Many miles ahead..’:

Sent from my iPhone using Tapatalk
Can I ask what car this was taken in?
-
Day 07
The buck 388 on a mass of micro brohmiliads. They're growing on a piece of driftwood that got saturated in the recent rains and got so heavy it split at the wire tie that held it on my fence. -
@GA1dad said:
Y'all are killing me with the stag GEC's. I've never really given them much thought,, but now that I can't easily buy one,,,, I'm really wanting one.That's understandable, but I'll say this...This is one of only two stag-handled knives that I own, and I bought it because it was the only GEC moose pattern knife I could find. I would rather have had it in bone or micarta, because it would have been less expensive and less "dear" to me, and therefore I would carry and use it more often.
I'm much prouder to carry my GEC micarta calf roper because I'm not concerned about that knife getting nasty or dropping it. That makes the calf roper worth more to me, even though the "prettier" stag moose was more expensive.
-
Bullwinkle J. Moose is loose!


Wow 66 in stag! I am still trying to find a stag 66 stockman without breaking my piggy bank too bad.

@NutSAK said:
Here's a good reference to reading the pattern codes and years on the tang stamp: https://www.casexx.com/Library/Secret.aspIf you click the book icons just above "Case XX - Secret Code", there is more info on jigging patterns, tang stamps, etc.
For Case, anything prior to the early 80's is a pretty sure bet, but the nice ones are getting expensive these days. You can tell that more time was spent to get the finish work just right on those earlier ones. I have some really nice Cases as recent as 2015 also and, as you suspected, some are better than others. They're all built well, but you don't get the "hand-built" feel from them like the earlier days. The current "T.B." (Tony Bose) series of knives is very well built, especially the Swayback Jack pattern #T.B.62117. That one is just about the best 5th (watch) pocket knife I've ever owned. I don't think you can go wrong with any of them as users, especially the stockman and trapper patterns.
Hmmm...if I could only borrow the DeLorean and go back in time to pick em' all up, this will be on my list.
The Tony Bose looks great, and seems to be a grail knife to many. I haven't crossed the border into custom just yet, and I know the water is far, far deeper at that end of the pool which I dare not to enter. :ahhhUnited Tree Brand Boker half Congress with red bone handles
I have had this knife close to 30 years now and carried it quite a bit in my younger years
I have always loved this knife and love the lightweight aspect of it 



This knife is like an old friend to me

Poncho, love how well the knife age, and the memories with it is certainly priceless.

@Fuzzbucket said:
Retro Fuzz Day 7I was inspired by NutSAK's beautiful image yesterday to polish up a couple of old 70s Cases... They do polish up rather well, don't they?

I've managed to not buy any Trads this year so far, but last night I caught myself trawling through both the Bay and AAPK looking for old Queens... all because of this bloody challenge! :ahhh
So what are you getting?!@Deathtakeslast said:
DAY 7Caught in the rain. Time to clean both up
Just curious, what's your routine maintenance for the knife?
@old Lefty said:
Day 7:
To quote Mr James: ’Many miles on these old roads. Many miles ahead..’:

Sent from my iPhone using Tapatalk
Great shot and awesome captions!
-
@comis said:
The Tony Bose looks great, and seems to be a grail knife to many. I haven't crossed the border into custom just yet, and I know the water is far, far deeper at that end of the pool which I dare not to enter. :ahhhWhoa, wait....I'm not even wandering around that pool wrapped in a towel! I'm still talking about Cases that have the TB prefix, not Tony Bose customs. Like the $60 Swayback Jack (TB62117CV) shown below.
Go here and look for the Case models that have the "TB" prefix. Those were developed in collaboration with Tony Bose: https://www.casexx.com/Library/PatternNumbers.asp

-
It is from the dusty cabin of Aurora, she is one of the few remaining speciments of that glorious Cadillac failure from the '80's; an Allante.
A car cherished by very few, Mr JR Ewing and yours truly amongst them ;)Lähetetty minun SM-T515 laitteesta Tapatalkilla
-
@old Lefty said:
It is from the dusty cabin of Aurora, she is one of the few remaining speciments of that glorious Cadillac failure from the '80's; an Allante.
A car cherished by very few, Mr JR Ewing and yours truly amongst them ;)Lähetetty minun SM-T515 laitteesta Tapatalkilla
Very nice sir, very nice indeed!

-
@GA1dad said:
Y'all are killing me with the stag GEC's. I've never really given them much thought,, but now that I can't easily buy one,,,, I'm really wanting one.Don't we all feel the same. There's a saying on another forum that I can't help but to agree, "GEC collecting is war". The rabbit hole is so deep, I have been falling ever since and there's no sign of slowing down.

@NutSAK said:
That's understandable, but I'll say this...This is one of only two stag-handled knives that I own, and I bought it because it was the only GEC moose pattern knife I could find. I would rather this pattern in bone or micarta, because it would have been less expensive and less "dear" to me, and therefore I would carry it more often.I'm much prouder to carry my GEC micarta calf roper because I'm not concerned about that knife getting nasty or dropping it. That makes the calf roper worth more to me, even though the "prettier" stag moose was more expensive.
I surely can respect how you can resist the temptation and trying to get knives that would get used, and in terms of practicality, I too think micarta will be more long lasting and probably can endure more abuse as EDC than precious material.
-
@GA1dad said:
I've been curious about the Rough Riders as well. I have heard they make good users. I just haven't found the right one at the right price yet.My opinion is that they do make some decent users in the $10 - $20 range, and they are tough to beat at that price point.
They have come out with a “reserve” line featuring D2 steel and selling for more like $50 - $60. I haven’t pulled the trigger on one of these yet, but I predict they actually won’t sell as well. I think most folks (including me) and would rather have a USA-made Buck or Case for that price.
-
Day 7

-
@old Lefty said:
It is from the dusty cabin of Aurora, she is one of the few remaining speciments of that glorious Cadillac failure from the '80's; an Allante.
A car cherished by very few, Mr JR Ewing and yours truly amongst them ;)Lähetetty minun SM-T515 laitteesta Tapatalkilla
Had to google that, certainly an interesting shape

United Tree Brand Boker half Congress with red bone handles
I have had this knife close to 30 years now and carried it quite a bit in my younger years
I have always loved this knife and love the lightweight aspect of it 



This knife is like an old friend to me

What a beauty

Day 7, S&M 60 and Cami 70

-
Thanks peeps
I really do love that knife
It has been a faithful companion several times over the years 
Love all the pics from today
This is always a great challenge and I never regret joining it

-
Another great day! I can barely keep up.
Day 7
The Case Peanut goes to work again.


-
Day 7
The 301 hanging out while I drink some cider. The Vic Alox Bantam photobombed, but I let it slide since it helped open the cider.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login