What do we have on the way?
-
Ordered a Leatherman Supertool 300 yesterday. Supposed to arrive by Friday.
Sent from my iPad using Tapatalk
-
@SurgeUk said:
Ok. Despite saying I didn't need/want one I've ordered a Bond :-[
I am beyond salvation
Aside from the Rebar, it's the most commonsense offering Leatherman has. Mine has pretty much been my go-to since I ordered it about the time they came out. The PST can be painful (and sometimes pinchy) to use when cutting hardened steel wire or when gripping a screw/bolt tightly. The Rebar isn't a whole lot thicker than the Bond, but "out and about" I rarely need the saw; and for the serrated blade, I have an OHO Spyderco rescue knife. Neither the Rebar or PST can be fitted with a clip without modification. But, the Bond is designed to take the Free's clip, and I already had one I'd bought when I bought a Free T2 (which ain't all that great). You even have a real awl (which is missing from the Wave/Charge, all the Frees, and Wingman/Sidekick/Rev) as well. And a real file, not that tiny Wingman-type thing off the Free.
And $50 or so--not north of $100.
-
Years ago (paper inside is marked 2012), my grandmother and I bought a large (94-piece--if I recall, close to $200 back then) USA-made Craftsman mechanic's toolset for my Granddad. Because sockets are constantly disappearing into a black hole or another dimension, I decided to get it out and put it together. I finally assembled the thing today, and as I was going through it, noticed that the 9mm deep well socket and what appears to be a 1/4 extension were missing (whichI can't find listed on the paper, but know I have one) had a slot, but was not included. These were sealed bags, so it happened at the factory.
$10 shipped NOS; actually the same as a new Proto socket from my local Fastenal. Especially given how Black and Decker ruined Craftsman. You know, you could've continued using the same contractors, or had them made as a lower-end Proto-made item. The prices of "pro-grade" tools is just obscene, and while not really a fan of Harbor Freight due to country of origin. Craftsman stuff is now made "over there" mostly too, but Harbor Freight is getting better. The Icon line, supposedly designed to compete with the high-end pro brands, really impresses me, and I'm going to try a 3/8 ratchet here pretty soon.

-
Patiently waiting for this to arrive

Sent from my SM-G960F using Tapatalk
-
Old Mechanic. Either a restore project or to harvest the early gen pliers. Cost all of $18 (equivalent).

I hope Bradley does not mind if I change the scales

Seller's pic, should get to me in about 4 days...

-
@Max Stone said:
Old Mechanic. Either a restore project or to harvest the early gen pliers. Cost all of $18 (equivalent).
I hope Bradley does not mind if I change the scales

Seller's pic, should get to me in about 4 days...
Really good score! I don't mind ad scales (especially if it's related to the local coal industry--which are featured on several traditional folders I own and a binder full of hard hat stickers); but someone's name is a problem. Coincidentally though, I knew a guy who had the same last name as a company logo (NOT someone's name) on a Waiter I found; and I gave it to him. He was pretty excited to get it.
-
Got a Suunto Core All Black on the way as an early birthday present to myself

-
A cheap $20 Casio. Almost went for the $50 entry model G Shock, but couldn't afford it this month. I've been working out more, and needed the stopwatch/alarm. I know a good friend who's gotten over 20 years out of one of these. Around here, I would say 50% own a Timex, 50% an older digital Casio.
I'm more fan of analog "expedition watch" type styles, but if we're talking about analog chronographs, that's out of my league entirely. My three users (four counting this one); a Bertucci DX-3 ($35 pre-owned/refurbished direct from company; but new as far as I can tell), Victorinox Garrison Roush Fenway Racing edition ($35 used plus about $10 counting new band bought after the already aftermarket cheap band the watch had on it failed), and Timex Expedition ($35 from local department store); plus this $20 watch; may be just under $200, but still comes in at what ONE Citizen costs (and I've been drooling over at my jeweler every time one of these entry-level watches gets their batteries and/or bands changed. Some day maybe...). I really want an analog diver, but those are expensive!!!!!

-
Nice

There's a lot to be said for a trusty Casio LCD watch. There's a good reason these have not changed in 20 years and Casio has such a loyal following.
-
@cody6268 said:
A cheap $20 Casio. Almost went for the $50 entry model G Shock, but couldn't afford it this month. I've been working out more, and needed the stopwatch/alarm. I know a good friend who's gotten over 20 years out of one of these. Around here, I would say 50% own a Timex, 50% an older digital Casio.I'm more fan of analog "expedition watch" type styles, but if we're talking about analog chronographs, that's out of my league entirely. My three users (four counting this one); a Bertucci DX-3 ($35 pre-owned/refurbished direct from company; but new as far as I can tell), Victorinox Garrison Roush Fenway Racing edition ($35 used plus about $10 counting new band bought after the already aftermarket cheap band the watch had on it failed), and Timex Expedition ($35 from local department store); plus this $20 watch; may be just under $200, but still comes in at what ONE Citizen costs (and I've been drooling over at my jeweler every time one of these entry-level watches gets their batteries and/or bands changed. Some day maybe...). I really want an analog diver, but those are expensive!!!!!

You should look at the Casio Duro

-
Four vintage lantern style flash lights and a Crescent 3/4 all metal chisel.
-
The Casio F-91W is going on 30 years unchanged. I have a Maratac AAA light on the way.

-
Found a leather holster that fits an iPhone 11 w/ Defender case. Those seem to be hard to find, and found a Texan company that makes them around $55 (open top) that are molded to the case. Of course I just had to see the Dragonscale version... which was $25 more. It's on its way. :ahhh
Got so tired of finding a case, then a nylon belt holder break. Had used Nite Ize for decades, but they make udder smurf anymore.
Asked BigTxLeather if they made a case in the same design for a SpiritTool X. It would be a custom order, and while they have a fast turn around I use my SpiritTool X multiple times as day. I really did not need another one... but... now have a Swisstool Spirit coming in from Amazon tomorrow. Figured I would see if I can stand that combi-edged knife.
Looks like the same tool, and I could store it at home or give it to a Leatherman friend. Comes with a nylon case. The leather OEM for the Spirit X is starting to get wimpy... fear it will not last long. If the nylon case is good I can use it a while before ordering a custom sheath.

-
A B/O Surge to replace my O/G one which I use for work.
I will now have to replace said item in a sneaky manner as it's not "official issue"

Best part; it didn't cost a penny, as I had £200 in Amazon Vouchers as part of a Govt reward scheme

-
Still waiting on my O'Brien knife, but this combo showed up and I had to have it.

-
@PitCarver said:
Still waiting on my O'Brien knife, but this combo showed up and I had to have it.Well, it would be rude not wouldn't it

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


