The Hacked Leatherman Owners Club.
-
I'm sure putting Rebar awls in Waves is old hat by now, but I've been meaning to do this for quite awhile. I replaced the flat driver, which I don't ever use.

Zoomed in, and with the sharpness and levels turned up to 11, you can see the washer I added to keep the awl from scraping along the side.

If the nylon washer ever gives up, I can always replace it with something else. It's what I had that fit.
-
@Jothra said:
What did that file come out of? It's got a needle sharpening groove!It would have came out of a PST II but I got it brand new old from a lot that AHB got

The older PST II had the groove but newer ones don't
The reason being is that people used the groove more and it wore out quicker and people were sending them.in for warranty just to have the file fixed :ahhh So they lost the groove :D -
@Jothra said:
I'm sure putting Rebar awls in Waves is old hat by now, but I've been meaning to do this for quite awhile. I replaced the flat driver, which I don't ever use.
Zoomed in, and with the sharpness and levels turned up to 11, you can see the washer I added to keep the awl from scraping along the side.

If the nylon washer ever gives up, I can always replace it with something else. It's what I had that fit.
Always a worthy mod
Great pics and the washer is just that little extra something that makes the mod even smoother 8) 
-
@Poncho65 said:
It would have came out of a PST II but I got it brand new old from a lot that AHB got
The older PST II had the groove but newer ones don't
The reason being is that people used the groove more and it wore out quicker and people were sending them.in for warranty just to have the file fixed :ahhh So they lost the groove :DThe more you know!
I understand the change. What a pain that must have been for the warranty department!
@Poncho65 said:
Always a worthy mod
Great pics and the washer is just that little extra something that makes the mod even smoother 8) 
Thanks! I've been meaning to do it for years. I couldn't tell you why it took me so long to get up the wherewithal.
-
Color swapped ST300



-
What a beauty! I'm waiting for Loki to get wrenches back in stock then ordering mine to start taking tools apart!
-
Thanks Waco
It is nice to be able to use those wrenches when modding and makes things so much easier

Good luck in the modding and hope the wrenches become available for you soon

-
I previously posted this in the Bond club thread, but I thought I would post it here as well. Just a simple mod, a Bond with the file replaced by the saw from a Rebar. The saw fits like a glove; the only physical modification that I made was to glue a strip of plastic on the inside handle surface for the tip of the saw to rest on.


-
It's a great mod and needed to be in here as well

-
Hooray! My Wave+ finally has a capable awl! I made it from a Sidekick/Wingman flathead driver.
This turned out to be a better "awl blank", if you will, because the little retrieval tab is so much lower on the tool compared to the standard Leatherman flathead driver on the Wave/Charge/Blast/Rebar/Bond etc. This allows for a longer blade length (capable of deeper drilling/reaming before the tab interferes) relative to the overall length of the tool. That's important, because this awl fits in between the flathead driver and scissors without hitting the plier rest tab.

.jpg)

-
Nice !

-
great mod

-
I have a wave+, and love it. Three questions.
- Is there a way to make holding it more comfortable? If I'm carving something for more than a few minutes the edges dig into my hand and make it uncomfortable to use. Is there a workaround for this?
- Is there a way to make the blade lock stronger? After a year of (ab)use my main blade has a bit of a wobble in it now.
- Is there a good way to carry one extra bit? I have a glass breaker bit from a skeletool XR coming, and I'm trying to figure out how to carry it.
THanks!
(So far I reground the main blade, added tweezers, and magnetized the tiny screwdriver for an improvised compass.)
-
@ElizabethGreene said:
I have a wave+, and love it. Three questions.- Is there a way to make holding it more comfortable? If I'm carving something for more than a few minutes the edges dig into my hand and make it uncomfortable to use. Is there a workaround for this?
- Is there a way to make the blade lock stronger? After a year of (ab)use my main blade has a bit of a wobble in it now.
- Is there a good way to carry one extra bit? I have a glass breaker bit from a skeletool XR coming, and I'm trying to figure out how to carry it.
THanks!
(So far I reground the main blade, added tweezers, and magnetized the tiny screwdriver for an improvised compass.)
First off, welcome to

To answer your questions

1 If you wrap it with leather while in use wpuld be one way to make it more comfortable in use but that might not be to portable or to convenient

2 not aure anyone has done anything to make the lock stronger or hold better
if it is to bad then you might have to send it in for warranty
but it may not be bad enough for warranty work 
3 we have had a member or 2 that have 3D printer bit holders and used adhesives and/or epoxy to attach them to the frame of the Wave

You might also go to the Mod Squad sub forum and search around for things you can do to your Wave
Good luck with whatever you end up doing
and also if you do, do anything, we like pics
:D

-
Wingman with straight edge blade….and a small serrated blade “just because”.

-
Great mod
I have had something like that on my list for a long while 
-
@Jothra said:
I'm sure putting Rebar awls in Waves is old hat by now, but I've been meaning to do this for quite awhile. I replaced the flat driver, which I don't ever use.
Zoomed in, and with the sharpness and levels turned up to 11, you can see the washer I added to keep the awl from scraping along the side.

If the nylon washer ever gives up, I can always replace it with something else. It's what I had that fit.
I might not regularly carry the Wave, but I still fiddle with it from time to time.

Scalpel and awl! With the bronzed stainless steel on that #4 scalpel holder, my Wave is looking a bit steampunk these days. -
I have wanted to add one of those blade exchangers to something since they came out but have just never bought one :ahhh
Looks great, Jothra

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



