*** The Dean51 30-day ***
-
Retro Fuzz Day 17
Very hot day here... relatively speaking... :ahhh

-
That's some lovely Chestnut bone on your stockman Fuzzy.

-
And a lovely Stockman all around. -
Day 16 and the Mercator basking in the sun

-
That looks good!
-


I have been eyeing some of the traditional offerings from Buck for a long while, and finally pull the trigger earlier this year on the 301 without trying to give it too much thought.
I want to like this knife and do like the overall material used and the construction. But I have to agree with Knifethoughts(a favorite knife youtube channel of mine) about the flaws with the design and execution--personally, the wasted space by using 3 springs and weaker spring(pull of 3.5/10) could still be overlooked, but the tip of the spey blade is indeed a little too proud of the chassis.
Generally, it wouldn't be much of a problem if I don't trying to rub my finger on it, but it does become a hazard when the sheepfoot is out. Instead of sanding down the kick, I am thinking to grind down the spine and the tip, since the nail nick is already pretty close to the chassis. What do you guys all think about this potential mod?

That book looks intriguing!

What’s it about? ???
-
Another awesome day of pics (I sound like a broken record but it is true :D )

-
Day 17 of 30
I have another Congress today

This is another Hen and Rooster
it has stag handles and carbon blades
I have already carried one like this earlier in the challenge but I bought this one because I wanted another one in case I lost or broke the other one :ahhh



-


I have been eyeing some of the traditional offerings from Buck for a long while, and finally pull the trigger earlier this year on the 301 without trying to give it too much thought.
I want to like this knife and do like the overall material used and the construction. But I have to agree with Knifethoughts(a favorite knife youtube channel of mine) about the flaws with the design and execution--personally, the wasted space by using 3 springs and weaker spring(pull of 3.5/10) could still be overlooked, but the tip of the spey blade is indeed a little too proud of the chassis.
Generally, it wouldn't be much of a problem if I don't trying to rub my finger on it, but it does become a hazard when the sheepfoot is out. Instead of sanding down the kick, I am thinking to grind down the spine and the tip, since the nail nick is already pretty close to the chassis. What do you guys all think about this potential mod?

If the mod will prevent you getting cut then I think it's a good idea, but maybe your 301 is flawed and should be replaced by Buck. It might be worth trying to get a replacement before doing anything permanent and if the replacement has the same issue then it's a factory flaw and you can modify it.
-
@Barry Rowland said:
Day 17: Busy with the No. 9 doing all kinds of yardwork. I used the blade, partially folded, to cut off branches hanging over our walkway. The results were amazing! It cut these branches off without breaking a sweat. Some of them were up to a half inch thick.
Seriously though, great idea Barry

-
-


I have been eyeing some of the traditional offerings from Buck for a long while, and finally pull the trigger earlier this year on the 301 without trying to give it too much thought.
I want to like this knife and do like the overall material used and the construction. But I have to agree with Knifethoughts(a favorite knife youtube channel of mine) about the flaws with the design and execution--personally, the wasted space by using 3 springs and weaker spring(pull of 3.5/10) could still be overlooked, but the tip of the spey blade is indeed a little too proud of the chassis.
Generally, it wouldn't be much of a problem if I don't trying to rub my finger on it, but it does become a hazard when the sheepfoot is out. Instead of sanding down the kick, I am thinking to grind down the spine and the tip, since the nail nick is already pretty close to the chassis. What do you guys all think about this potential mod?

I dont mind three spring knives if they are done right. It saves having to crink the secondary blades so they will fit in a two spring frame. My guess is that cutlers with good crinking skills are a rare bird in todays world.
Your mod should work!

-
Day 17
Case Stockman and a GEC Bull Nose
-
Day 17
With a very nice and sunny day reaching over 30°C today it was very muggy (we're not used to that anymore here)... aaaand the missus decided I shall mow the lawn ::)
No use came up for the Squire today...

-
Day 17
Today I'm showcasing the smaller blade on the America's Trades Canoe. -
@Alan K. said:
Day 17
Today I'm showcasing the smaller blade on the America's Trades Canoe.Nice pic Alan

-
Fantastic pictures everyone!
Lähetetty minun SM-T515 laitteesta Tapatalkilla
-

Day 17

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



