*** The Dean51 30-day ***
-
-


I have been eyeing some of the traditional offerings from Buck for a long while, and finally pull the trigger earlier this year on the 301 without trying to give it too much thought.
I want to like this knife and do like the overall material used and the construction. But I have to agree with Knifethoughts(a favorite knife youtube channel of mine) about the flaws with the design and execution--personally, the wasted space by using 3 springs and weaker spring(pull of 3.5/10) could still be overlooked, but the tip of the spey blade is indeed a little too proud of the chassis.
Generally, it wouldn't be much of a problem if I don't trying to rub my finger on it, but it does become a hazard when the sheepfoot is out. Instead of sanding down the kick, I am thinking to grind down the spine and the tip, since the nail nick is already pretty close to the chassis. What do you guys all think about this potential mod?



I have been eyeing some of the traditional offerings from Buck for a long while, and finally pull the trigger earlier this year on the 301 without trying to give it too much thought.
I want to like this knife and do like the overall material used and the construction. But I have to agree with Knifethoughts(a favorite knife youtube channel of mine) about the flaws with the design and execution--personally, the wasted space by using 3 springs and weaker spring(pull of 3.5/10) could still be overlooked, but the tip of the spey blade is indeed a little too proud of the chassis.
Generally, it wouldn't be much of a problem if I don't trying to rub my finger on it, but it does become a hazard when the sheepfoot is out. Instead of sanding down the kick, I am thinking to grind down the spine and the tip, since the nail nick is already pretty close to the chassis. What do you guys all think about this potential mod?

All (3?) of my 301s have this same issue of the tip of the spey blade sitting a bit proud when closed, so I think it is a design rather than execution issue. My experience is that while it looks questionable, it doesn’t create any actual hazard or problems in use, so I would leave it as is. I do wonder, though, as time goes by and the spey blade gets sharpened repeatedly, if it might become more of a problem.
I may be in the minority, but I actually appreciate a weaker spring pull. None of my 301s are loose or wobbly in either open or , and I like to be able to open the knife multiple times a day without resorting to a knife pick and without major risk of breaking my thumbnail.
-
Day 17 (makeup)
The 301 and I make a quick stop before hitting the road again…

-
Day 18:
@comis said:
Instead of sanding down the kick, I am thinking to grind down the spine and the tip, since the nail nick is already pretty close to the chassis. What do you guys all think about this potential mod?That's a bit of a bummer.
I've got a 371, which I think is more or less the same as the 301.

I'd agree that the knife is a bit oversized. For a three-spring knife, the springs are surprisingly soft. The steel is a bit on the soft side, too. It takes a nice edge, for sure. The fit and finish on mine is pretty good, even so, there is a 'crude' quality about it. I've used it a bit for light tasks, but haven't really put it through any solid testing. I think for causal use it is pretty good. And....I can't help but like it.
The spey blade on yours does look to be an issue. I'd try sanding the kick a little at a time. Once the nail nick gets to the point were it is still useable, but further sanding would create a problem, I'd look at re-profiling the blade to get that point and edge out of the way and protected (and your fingers protected). But that's just me. No harm in just having a go at re-profiling it as it is now.
-
Day 18
TC Barlow and a Camillus #67

-
@Fuzzbucket said:
Retro Fuzz Day 18Case 1977 Cigar Jack...


-
Day 18
2010 Case Mini Trapper, single Wharncliffe blade.


-
-
Day 18
Been in the pub a few hours. A bit pissed. Peanut keeping an eye on things.

-
Day 18
GEC English Whittler and a Queen City English Jack Knife
-
-
Sweet Day 17 and Day 18 pics :ahhh

-
Day 18 of 30
I have another Hen and Rooster today
It is a Sowbelly Stockman with stag handles
It has laser etched blades with Hen and Rooster and Master Cuttin Horse on the other side 



-
Day 18
Now that I’m home (for the moment haha) and have access to the rest of my collection, I’ll try for a bit more variety.
Cold Steel Ranch Boss opened a few packages.
What was in the packages, you ask? More knives of course. What knives, you say? That will remain a mystery for now, but perhaps some will make appearances later in this challenge ;-)

-
@Deathtakeslast said:
DAY 18Where's the knife? Not seeing it in this picture.

-
Day 18
The Colonial 3 blade electrician and the Buck 385 mini toothpick that came with the 388 as a boxed set. You know what this world needs? More knives with bails. I like them. Why have they disappeared? -
@Alan K. said:
I like the belly on that one Borg. I bet it's a good slicer.
It is that, great for tomatoes

I have another Hen and Rooster today
It is a Sowbelly Stockman with stag handles
It has laser etched blades with Hen and Rooster and Master Cuttin Horse on the other side 



Another beauty

Day 18

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


but ai do like them