*** The Dean51 30-day ***
-
<u>Day 19</u>

Been playing with these 2 today, despite both are lockable knife, the GEC 73 does have a really stout back spring, and in some way, unnecessarily strong for a liner lock blade(but one can say it's 'fail safe', glass half full or half empty). On the other hand, the new GEC 83 with the lock back is just perfect.
-
@glenfiddich1983 said:
Day 18
I remember this, still cool!
Swapping back to my A.Wright Spearpoint today.
I do like the fact Arthur Wright are still a very small concern. No automation seen here, just lots of hand and eyeball.
https://www.youtube.com/watch?v=vzhdlid5MM4&t=7sThanks for the vid, it's cool to see how it's made!
-
An interesting thing about this knife is that I got it for a fair price in 2011 because it was a "second", marked on one of the tangs with an "S". The reason it was so marked is because the scales didn't match. When the knife was new, the micarta was two-toned, and one side had a cream-colored appearance with the rust red, and the other was yellow and rust red. Otherwise it was flawless.
Now that the micarta has aged, that two-toned appearance has completely gone, and now both sides match perfectly with a rust red "fade". Compare the photos below of when the knife was new, with the photo I took today. Your eyes aren't deceiving you, the pics show very well how it has changed in 10 years.
2011


2021

Wow, doesn't look like the same knife!
-

Been playing with these 2 today, despite both are lockable knife, the GEC 73 does have a really stout back spring, and in some way, unnecessarily strong for a liner lock blade(but one can say it's 'fail safe', glass half full or half empty). On the other hand, the new GEC 83 with the lock back is just perfect.
Couple sweeties Comis!

-
Wow... awesome cutleries presented again :ahhh
-
Day 19


-
Moose and Beaver didnt get to go to Bents Fort last week. I took a pic of them on the brochure. :D
This warrants a worthy meme :D

An interesting thing about this knife is that I got it for a fair price in 2011 because it was a "second", marked on one of the tangs with an "S". The reason it was so marked is because the scales didn't match. When the knife was new, the micarta was two-toned, and one side had a cream-colored appearance with the rust red, and the other was yellow and rust red. Otherwise it was flawless.
Now that the micarta has aged, that two-toned appearance has completely gone, and now both sides match perfectly with a rust red "fade". Compare the photos below of when the knife was new, with the photo I took today. Your eyes aren't deceiving you, the pics show very well how it has changed in 10 years.
2011


2021

Thanks for the comparison pix! At first glance, I thought it was a bone handle, but didn't know even micarta could change color like that. Learn something new today.

-
Sweet awesome pics and trads today 8)

-
Day 19 of 30
H&R Congress with pick bone handles
from way back in 2001 when they decided to put years on their shields for a few years :D




-
Retro Fuzz Day 19
Little GEC 06 and large GEC 42...

-
@comis said:
Thanks for the comparison pix! At first glance, I thought it was a bone handle, but didn't know even micarta could change color like that. Learn something new today. :tu:Me neither! I have no idea how the color can "migrate" through a phenolic resin like that, but it sure did. I guess it wasn't fully cured when the knife was built, but it took a very long time for the colors to blend together. I wonder if that material was somewhat experimental for GEC at the time, because this is the only model I believe I've seen it on.
There's this Youtube review of the same knife from 2012, and you can see it looks like mine originally did, but his slabs match:
-
@Fuzzbucket said:
Retro Fuzz Day 19Little GEC 06 and large GEC 42...

Beautiful knives Fuzzy. This is the first picture that gives me a good size reference for the 06. Looks like a great watch/5th pocket knife.
-
Moose and Beaver didnt get to go to Bents Fort last week. I took a pic of them on the brochure. :D
Nice

@Fuzzbucket said:
Retro Fuzz Day 19Little GEC 06 and large GEC 42...

Really like the shape of the blade on the little un'

Day 19, Kizlyar nsk7

-
Day 19
Canoe on post duty.

-
@Fuzzbucket said:
Nice Box Beam Level!
Thanks Fuzzy
those GECs are awfully nice as well

-
@nate j said:
All (3?) of my 301s have this same issue of the tip of the spey blade sitting a bit proud when closed, so I think it is a design rather than execution issue. My experience is that while it looks questionable, it doesn’t create any actual hazard or problems in use, so I would leave it as is. I do wonder, though, as time goes by and the spey blade gets sharpened repeatedly, if it might become more of a problem.I may be in the minority, but I actually appreciate a weaker spring pull. None of my 301s are loose or wobbly in either open or , and I like to be able to open the knife multiple times a day without resorting to a knife pick and without major risk of breaking my thumbnail.
Nate, thanks for the data. If I have my way, I would prefer my slipjoints to have a pull in the range of 5-7(given SAK is 5) and respective to their size(larger, longer blade does need slightly harder spring).
I used to have a really hard time with the real nail puller like the GEC 23 or the likes, but over time I manage to get slightly better at it. Some may say harder spring is more 'secure' to use, but I think any slip joint(or as a matter of fact, any lock) could fail and harder spring just fail more catastrophically.
On the other end of the spectrum, the softer spring is really easy to open, but does start closing up easily if the material I cut is binding. Either way, I need to exercise fair amount of cautious when using them, so that's part reason why I prefer to stay in the range of 5-7 if I could have my way.
That's a bit of a bummer.
I've got a 371, which I think is more or less the same as the 301.

I'd agree that the knife is a bit oversized. For a three-spring knife, the springs are surprisingly soft. The steel is a bit on the soft side, too. It takes a nice edge, for sure. The fit and finish on mine is pretty good, even so, there is a 'crude' quality about it. I've used it a bit for light tasks, but haven't really put it through any solid testing. I think for causal use it is pretty good. And....I can't help but like it.
The spey blade on yours does look to be an issue. I'd try sanding the kick a little at a time. Once the nail nick gets to the point were it is still useable, but further sanding would create a problem, I'd look at re-profiling the blade to get that point and edge out of the way and protected (and your fingers protected). But that's just me. No harm in just having a go at re-profiling it as it is now.
I agree on the crude, one very minor thing I do notice is the swedge on my clip point--it's only done on one side but not the other. I always kinda wonder about that--with all those Buck 110 famously known for the blade shape, why not put it on both sides?
Thanks for the tip, I am keeping the knife in my pocket and try to play with it some more, before deciding which way to go.
-
@Fuzzbucket said:
It's teeny, it's pretty much Peanut sized.
Sounds like it's very similar to the Case Swayback Jack. They have the same 2" blade length, but the swayback has a longer (3 3/16") frame. I'll carry that one tomorrow so we can compare.
As ubiquitous as the Pemberton seems here, I think I'll start calling the swayback the "poor man's Pemberton". :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login