Half Multiforce
-
@Adam5 said:
I worked on the scales again tonight. I decided to copper plate the scales. I don't have the proper power supply, and I didn't even have the proper chemicals or equipment to plate copper onto stainless steel (typically a nickel layer is plated first since copper won't bond to the passive layer on the surface of stainless steel). However, if your goal is for an interesting look rather than a proper layer of copper, then it is possible to achieve a decent result with crude instruments.

Now that's purdy. I'd be happy to keep the stainless look if I ever get around to doing mine, but that copper is mighty nice.
-
Nice!
these half tools comes in real handy alot of time. I carry one also so it compliment any other plier based MT I chose for the day. -
the main reason I built my first one is to compliment any set of plier based tool that I wanted to carry

-
-
@ReamerPunch said:
That looks great, Adam!

/post/2158648

Thanks RP!
I should have provided the link to your can opener thread since it was your test I had in mind when describing the quality of the opener. -
Predictably, the copper did not hold up well on the side opposite the clip. That side has to ride against a sweaty leg all day.
So, I tried my hand at DIY black oxide using ferric chloride. The scales are dark gray instead of black, but they do provide contrast against the stainless steel tools, which is what I wanted. It may not look as good as Poncho's Charge knife, but I am happy with it.


-
I think it looks awfully nice
Very cool contrast now 8)
So nice in fact I may have bought a Multiforce myself
:DIt is actually not that bad of a tool and I am not sure If I want to take it apart now :ahhh
-
@Poncho65 said:
I think it looks awfully nice
Very cool contrast now 8)
So nice in fact I may have bought a Multiforce myself
:DPersonally, I think it is one of the better MTs available.
It is actually not that bad of a tool and I am not sure If I want to take it apart now :ahhh
I probably would not have made this one into a knife if I did not have a second one

-
Nice Semiforce! I like the GO finish. ;)
-
-
@Adam5 said:
I probably would not have made this one into a knife if I did not have a second one
This thread is gateway modding. See a very nice mod, buy a tool to make a copy. Realize you like the new tool. Buy a second one for the actual mod. Realize you need a spare because you like the original and the mod. Buy a third tool.

-
Not just a gateway because I have been modding for years and still will probably fall for the trap


-
Here is a short explanation of how I used the ferric chloride to produce the black oxide finish:
I prepared separate plastic containers with the following items:
Clean water (distilled is best)
Water mixed with dishwashing liquid
1 part ferric chloride and 2 parts white vinegar (this is the etching bath)
Water mixed with baking soda (to neutralize the hydrochloric acid formed in the ferric chloride bath)
The process:
Put on nitrile or latex gloves
Tie string to scale
Clean the scale in the dishwashing liquid
Rinse in the water
Clean with degreaser
Rinse in the water
Clean again with degreaser
Rinse again
Pat dry with lint-free cloth
Dip into ferric chloride/vinegar bath and leave for a few minutes
Remove scale from etch bath and drop into baking soda bath
RinseIf the black oxide finish is to your liking, then dry and soak in oil for a while.
If not, repeat the steps above.This method will achieve a dark grey, not black, finish. There are solutions (copper/selenium) for sale that can produce a black finish, but I don't know how durable they are. This method is relatively cheap and can be repeated if the finish is scratched or worn away.
-
Hey, thanks for the setailed HowTo Adam

I'll have to try that out. -
Will have to check this method out

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
now I will have to get another :ahhh 