Daredevil Challenge 2021
-
@Fireman said:
That's awful pricey for half a Leatherman.

I'll be watching, though, because it might be...something I need...

The prices have gone up a lot, but when I got mine it was about $20-$25. Also, there are a couple versions with the made in China ones being the cheapest and sometimes available for less than $10.
-
So I probably should have asked before entering...
Is modding a less-than-liked tool to make it more likable OK for the challenge?
One of the love/hate things about the S557 is I like having a nail file, but miss having a small knife blade.
So I used the tips in Felix Immler's YouTube video "The Hook Blade Trick - Swiss Army Knife modification - Victorinox custom & maintenance (20/25)" to grind a hook blade into the can opener.
So now I have a sort-of second blade, good for ripping open boxes and plastic clamshell packaging at least.

-
I unloaded my Wingman, so I'm going to go with the Bond. I definitely haven't fallen for it.
-
Some people are choosing premium tools that they just never got used to and others are going to try to get by with Junque. I see the latter as being the more difficult challenge. I'm suggesting that this challenge needs an escape clause. If a tool is so irredeemable that it just can't be used then we shouldn't force the user to continue with it, as that would be cruel. After all, knowing a tool is really that bad is still useful information. However, there would need to be some sort of penalty to make up for changing carries mid-challenge. Perhaps requiring the user to continue to take their daily picture with the terrible tool, but pictured along with the tool they are using in its place, and explaining each day why the one is better than the other for a particular use.
It's either that, or forty lashes with a wet noodle. -
Day 1
John-Benzen Tools, Div of Chicago Tools HBMT. Well it’s supposed to be Daredevil so here goes

Day 1, Coco’s take…what’s that?

Hahaha classic, you idiot


-
@Sos24 said:
The prices have gone up a lot, but when I got mine it was about $20-$25. Also, there are a couple versions with the made in China ones being the cheapest and sometimes available for less than $10.I got mine around the time Armstrong Tools went out of business, as a seller had several Utica-made knives and multitools Armstrong had sold under their name (and etched "ARMSTRONG" where Utica would normally be stamped). If I recall, I paid $15.
-
Day 1
I used the saw to shorten a Bic pen even further. I wanted another cm off, to make it flush with the rest of my keychain items.
The saw did an average job. This pen was originally shortened from full length with the Roxon Storm. That saw was nice. Much more aggressive than the Flik's saw. The Flik took longer, and it kept binding, and in the end I cracked the plastic.
-
@Alan K. said:
Some people are choosing premium tools that they just never got used to and others are going to try to get by with Junque. I see the latter as being the more difficult challenge. I'm suggesting that this challenge needs an escape clause. If a tool is so irredeemable that it just can't be used then we shouldn't force the user to continue with it, as that would be cruel. After all, knowing a tool is really that bad is still useful information. However, there would need to be some sort of penalty to make up for changing carries mid-challenge. Perhaps requiring the user to continue to take their daily picture with the terrible tool, but pictured along with the tool they are using in its place, and explaining each day why the one is better than the other for a particular use.
It's either that, or forty lashes with a wet noodle.Jothra did some pliers-based solo challenges years ago and vowed to use the tool until the pliers jaws broke, rendering it unusable. Maybe that's the escape clause for Junque (I love that term!) - if it breaks so that it's unusable, you can bring in another unliked sub or have to withdraw?
Reporting back on the limits of these tools would be great info to share.
I have to admit I'm in the "premium tools that they just never got used to" group. I don't expect my Victorinox to break. I'll just be contending with the frustration level of not carrying one of my first string SAKs. But I won't drop out due to remorse - I knew what I was signing up for!
-
Day 1
20210801_105053 by Humayd a r Mahomedy, on Flickri'm going with a Swisstool for this challlenge,i got it used,from a friend who got it used,in June 2019.
i don't hate the tool,nor do i dislike it,it just isn't a good fit for me.
it is very well made,and this particular tool looks to have had some cosmetic work done on the pliers and handles.the file also has a notch cut into it.
i find some of the tools difficult to access,and the edges of the handles were uncomfortable in use,even though i hit them with a de-burring wheel on the buffer.
i do like the tool enough to want more,especially the X model.
some of my hesitance is probably due to the tool being pre,pre,pre-owned.
let's see how i find this tool after 30 days

-
DAY 1: And I'm off on a horse with no name!
Swiss+Tech 13 in 1 multitool. I plan to use everything but the glass breaker.
-
@SteveP said:
So I probably should have asked before entering...Is modding a less-than-liked tool to make it more likable OK for the challenge?
One of the love/hate things about the S557 is I like having a nail file, but miss having a small knife blade.
So I used the tips in Felix Immler's YouTube video "The Hook Blade Trick - Swiss Army Knife modification - Victorinox custom & maintenance (20/25)" to grind a hook blade into the can opener.
So now I have a sort-of second blade, good for ripping open boxes and plastic clamshell packaging at least.
So as long the mods does not alter the original too much, I think it is acceptable. But I would suggest to refrain from doing further mods to the tool until the end of the challenge.

@Alan K. said:
Some people are choosing premium tools that they just never got used to and others are going to try to get by with Junque. I see the latter as being the more difficult challenge. I'm suggesting that this challenge needs an escape clause. If a tool is so irredeemable that it just can't be used then we shouldn't force the user to continue with it, as that would be cruel. After all, knowing a tool is really that bad is still useful information. However, there would need to be some sort of penalty to make up for changing carries mid-challenge. Perhaps requiring the user to continue to take their daily picture with the terrible tool, but pictured along with the tool they are using in its place, and explaining each day why the one is better than the other for a particular use.
It's either that, or forty lashes with a wet noodle.Alan, good point, I tend to agree with SteveP's quote on Jothra, that we ought to give it a sincere effort and give it out best shot before contemplating an escape clause(unless it somehow cause bodily harm, that's a totally different scenario. Unlike other challenges, this one will actually challenge our ingenuity and tolerance, can we make the best of the situation knowing all the flaws and weaknesses of tool, and still be able to come up on top after spending a month with Junque?
I don't expect everyone to finish liking their tool, but I am sure this will widen our horizon to be more accepting and tolerant towards different kind of tools we used to.

John-Benzen Tools, Div of Chicago Tools HBMT. Well it’s supposed to be Daredevil so here goes

Day 1, Coco’s take…what’s that?

Hahaha classic, you idiot


Great start, and glad to see Coco on board too! :D
@Humayd A R Mahomedy said:
Day 1
20210801_105053 by Humayd a r Mahomedy, on Flickri'm going with a Swisstool for this challlenge,i got it used,from a friend who got it used,in June 2019.
i don't hate the tool,nor do i dislike it,it just isn't a good fit for me.
it is very well made,and this particular tool looks to have had some cosmetic work done on the pliers and handles.the file also has a notch cut into it.
i find some of the tools difficult to access,and the edges of the handles were uncomfortable in use,even though i hit them with a de-burring wheel on the buffer.
i do like the tool enough to want more,especially the X model.
some of my hesitance is probably due to the tool being pre,pre,pre-owned.
let's see how i find this tool after 30 days

I have no doubt a Swisstool is a very likeable tool, but we will see!

@Fireman said:
DAY 1: And I'm off on a horse with no name!
Swiss+Tech 13 in 1 multitool. I plan to use everything but the glass breaker.
Pretty cool tool! Already I have seeing a few tools I don't usually in normal challenges, should be a challenging month ahead!

-
<u>Day 1</u>

This Wetols I got from Amazon cost me $22, and considering the lower cost, it is actually relatively well made. But it is a real pant dragger(which I really do hate), and I sworn I need to hold onto my pants whenever I need to take a leak. Crazy heavy, a whopping 336g (11.8oz), it looks beefy right next to a Spirit X.
-
Nice start fellas!

-
I am marinating a couple of pork tenderloins this morning and decided to use a non-alcoholic Heiniken as the liquid. I pulled out the TripSaver to open the bottle and then remembered that for the TripSaver the can/bottle opener is replaced by an awl. No problem.
I grabbed the bottle with my left hand by the neck. I stuck the plier head tips under the bottle cap and, using my left index finger as a fulcrum, pried the bottle cap off. A trick that I am sure many if not all of you know. I had no worries about the plier tips. The plier head is quite robustly built.

-
@Humayd A R Mahomedy said:
Day 1
20210801_105053 by Humayd a r Mahomedy, on Flickri'm going with a Swisstool for this challlenge,i got it used,from a friend who got it used,in June 2019.
i don't hate the tool,nor do i dislike it,it just isn't a good fit for me.
it is very well made,and this particular tool looks to have had some cosmetic work done on the pliers and handles.the file also has a notch cut into it.
i find some of the tools difficult to access,and the edges of the handles were uncomfortable in use,even though i hit them with a de-burring wheel on the buffer.
i do like the tool enough to want more,especially the X model.
some of my hesitance is probably due to the tool being pre,pre,pre-owned.
let's see how i find this tool after 30 days

I was not expecting to see a SwissTool in this. :D
-

This Wetols I got from Amazon cost me $22, and considering the lower cost, it is actually relatively well made. But it is a real pant dragger(which I really do hate), and I sworn I need to hold onto my pants whenever I need to take a leak. Crazy heavy, a whopping 336g (11.8oz), it looks beefy right next to a Spirit X.

I kinda like this. I'd rather be using that than the Flik. :ahhh -
Day 01
The Gerber MP-600. I've never liked it because the tools are short for a full size tool and it is uncomfortable for me to carry it. Here the sliding pliers are seen withdrawn and deployed. -
@ReamerPunch said:
I was not expecting to see a SwissTool in this. :D:D
what can i say :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login