Daredevil Challenge 2021
-
Here are a couple of pictures of the saw:


-
Daredevil Day 3: I think the heat and humidity finally killed our old keypad deadbolt, so replacement was in order. Normally I would use a screwdriver, but it's Daredevil month, so I gave it a shot. The screwdriver was long enough to access the screws for the deadbolt through the thick battery housing on the inside of the door, which was somewhat surprising given it's odd, widening shape. When install the same sort of screw in the new lock, it started going downhill. Whoever makes the actual parts (China) doesn't really clean out the threads, and while one went in easily, I reached a point where I could not turn other at all using the Swiss+Tech. It really felt like the tool was going to give out. I switched to a Kobalt ratchet screwdriver, which I thought might strip out, having done that to one of their ratchet end wrenches, but it drove the screw in easily. Larger grip and more leverage won the day.
To be fair, I doubt my Leatherman PST would have worked better than the Swiss+Tech, and if the lock were finished better, the Swiss+Tech would have been all I needed for both large and small screws.


-
@comis said:
Good use, Cody! That's a Swiza, right? I remember they were making noise when Wenger executive was leading their team, kinda wonder how they are doing nowadays.Looks pretty good, I am kinda looking forward doing the Delemont challlenge later on this year.
Yep, Swiza.
It's the D04, which is kinda their take on the Tinker. Back when Swizas came out, they were a lot more expensive than their equivalent Victorinox models (about double), but I just so happened to find this one (only offered in black) on sale for $20 about a year or two after they came out. They're decent knives, but I've never been able to give up SAKs for one, and the full range has never been really available in the US. And the Phillips is #0/ #1 not #1/#2 like SAKs. I do like that they have a one-hand opening blade in what is just a little bit larger (95mm) than a 93mm frame as opposed to a 111mm-size knife, which is really too big for EDC. The new SH09TR really gets my attention.
-
Lots of unique choices for this challenge and looks like most of us are making it work
I just hope I can deal with the NXT all month :ahhh -
You could almost say it's challenging. ::)
-
Day 3 of 30
The Phillips is one of the better features of the NXT 8) It had a good reach, good bite and the lock holds well
I tightened a loose clip on a Dealt battery drill and it performed well :D


-
-
@Fireman said:
Daredevil Day 3: I think the heat and humidity finally killed our old keypad deadbolt, so replacement was in order. Normally I would use a screwdriver, but it's Daredevil month, so I gave it a shot. The screwdriver was long enough to access the screws for the deadbolt through the thick battery housing on the inside of the door, which was somewhat surprising given it's odd, widening shape. When install the same sort of screw in the new lock, it started going downhill. Whoever makes the actual parts (China) doesn't really clean out the threads, and while one went in easily, I reached a point where I could not turn other at all using the Swiss+Tech. It really felt like the tool was going to give out. I switched to a Kobalt ratchet screwdriver, which I thought might strip out, having done that to one of their ratchet end wrenches, but it drove the screw in easily. Larger grip and more leverage won the day.To be fair, I doubt my Leatherman PST would have worked better than the Swiss+Tech, and if the lock were finished better, the Swiss+Tech would have been all I needed for both large and small screws.


In some way, I think it is a fail on the (MIC?) parts more than the tool, but glad to see all works out in the end. Always be prepared!

It's the D04, which is kinda their take on the Tinker. Back when Swizas came out, they were a lot more expensive than their equivalent Victorinox models (about double), but I just so happened to find this one (only offered in black) on sale for $20 about a year or two after they came out. They're decent knives, but I've never been able to give up SAKs for one, and the full range has never been really available in the US. And the Phillips is #0/ #1 not #1/#2 like SAKs. I do like that they have a one-hand opening blade in what is just a little bit larger (95mm) than a 93mm frame as opposed to a 111mm-size knife, which is really too big for EDC. The new SH09TR really gets my attention.
Wow, looking at the lineup, it seems like Swiza has been keeping themselves rather busy. I like the model you are posting, but I probably would favor a plain edge over the serration. But for collectability, I'd think the one you have posted or this one would be up the list:
(it's almost like GEC doing the Beer and Sausage, anyone putting a hoof tool and comb right next to each other in some way does make this a little novel.) :D
The Phillips is one of the better features of the NXT 8) It had a good reach, good bite and the lock holds well
I tightened a loose clip on a Dealt battery drill and it performed well :D


Great use Poncho!

-
<u>Day 3</u>

Haven't been back in the office for the longest time, got myself a hearty breakfast to start the day. I used not to carry alcohol wipe/sanitizer on person, but due to pandemic, this has become a habit and it does come in handy when cleaning the main blade for food.
The crazy heavy Wetols does bang around my knee quite a bit, and very noticeable if I am walking fast. It's probably going to be okay for a day or two, but it may be a different story after a week or two. I probably will put that in some kind of oversized slip or pocket organizer to cushion it a bit.
-

Haven't been back in the office for the longest time, got myself a hearty breakfast to start the day. I used not to carry alcohol wipe/sanitizer on person, but due to pandemic, this has become a habit and it does come in handy when cleaning the main blade for food.
The crazy heavy Wetols does bang around my knee quite a bit, and very noticeable if I am walking fast. It's probably going to be okay for a day or two, but it may be a different story after a week or two. I probably will put that in some kind of oversized slip or pocket organizer to cushion it a bit.
That's the best picture anyone has taken of that tool.

Maybe sheath-carry?
It would be better to have all that weight hang from a belt. -
@ReamerPunch said:
That's the best picture anyone has taken of that tool.
Maybe sheath-carry?
It would be better to have all that weight hang from a belt.
Thanks for the suggestion, I live in a pretty urban densely populated area, so sheath carry often may attract unnecessary attention. Right now I am planning to stuff it in a Nurse organizer and potentially put it in my pants upper right pocket... -
Oh, wait, I think my magnetic sheath may work, if it doesn't imprint too much...(pls don't click if you are not ready to see grown man belly dance)
:D- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
I know what you mean. I usually just keep multi-tools in their sheaths, in my cargo pocket. I usually keep other things, packets of tissues, shopping bags and other soft stuff, to keep the pocket full and keep the tool from bouncing around.
Also, I liked your dance. :D
-
@ReamerPunch said:
I know what you mean. I usually just keep multi-tools in their sheaths, in my cargo pocket. I usually keep other things, packets of tissues, shopping bags and other soft stuff, to keep the pocket full and keep the tool from bouncing around.Hey, great idea on the shopping bag, I could wrap a thin nylon bag around the tool like a hotdog.

@ReamerPunch said:
Also, I liked your dance. :D
:D -
-
@ReamerPunch said:
Day 3Here we have the Good, the Bad, and the Ugly. :D
I was thinking of using the Coast for this challenge, but people talked me out of it. It would have been painfully difficult to try and use the Coast for a month. The Flik has its quirks, flaws, and limitations, but it is still a usable tool. Sure, the Coast is much more comfortable, but its implements are barely usable.
Close escape there RP :ahhh 
-
Mail call was all the S557 was called upon for.
The nail file makes a fine letter opener and the knife blade cut through the packing tape like a hot knife through...packing tape.

Inside the box was a little-used Wenger Traveler. I promise not to use it until next month.
Mail duty is a good use (especially if it contains something like that
) -
-
-
@Fireman said:
Daredevil Day 3: I think the heat and humidity finally killed our old keypad deadbolt, so replacement was in order. Normally I would use a screwdriver, but it's Daredevil month, so I gave it a shot. The screwdriver was long enough to access the screws for the deadbolt through the thick battery housing on the inside of the door, which was somewhat surprising given it's odd, widening shape. When install the same sort of screw in the new lock, it started going downhill. Whoever makes the actual parts (China) doesn't really clean out the threads, and while one went in easily, I reached a point where I could not turn other at all using the Swiss+Tech. It really felt like the tool was going to give out. I switched to a Kobalt ratchet screwdriver, which I thought might strip out, having done that to one of their ratchet end wrenches, but it drove the screw in easily. Larger grip and more leverage won the day.To be fair, I doubt my Leatherman PST would have worked better than the Swiss+Tech, and if the lock were finished better, the Swiss+Tech would have been all I needed for both large and small screws.


Every day's a school day 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


(I'll get my coat