The Go BIG Challenge
-
Day 5: Taking a stab with the scaler


-
Day 5 of 60
Today used wire stripper to make special tool. Needed to strip part of wire and bend it 90 degrees so i could fit it behind steel plate to pick up wire.
Also used small blade to open package what contained LM Crunch.

Only Tools Matters
-
Excellent use. 
-
Day 5
Post duty today


-
Excellent pics and uses everyone

Somehow I didn't feel like drinking tea today though :DDay 05
Strawberries :ahhh

-

I'll probably try 30/Blackie and 30/Hofritz...
-
Day 5
Today I needed to replace a drain pipe in the basement. The swisschamp was up to the challenge. I used the Phillips driver to remove a support strap. The saw removed the section of bad pipe and then cut the new one to the correct length. I used the file to smooth up rough edges on the cut. The tags on the new couplers were cut off with the scissors. Once I got the new pipe into place the coupler clamps were tightened with the large flat tip/ cap lifter. Finally, the awl was used to make a pilot hole and the Phillips to hang the relocated strap.
Awl done and awl with the swiss champ. -
@McStitchy said:
Somehow I didn't feel like drinking tea today though :DAww...hope you feel back to normal soon!
-
@Jackpine54 said:
Day 5Today I needed to replace a drain pipe in the basement. The swisschamp was up to the challenge. I used the Phillips driver to remove a support strap. The saw removed the section of bad pipe and then cut the new one to the correct length. I used the file to smooth up rough edges on the cut. The tags on the new couplers were cut off with the scissors. Once I got the new pipe into place the coupler clamps were tightened with the large flat tip/ cap lifter. Finally, the awl was used to make a pilot hole and the Phillips to hang the relocated strap.
Awl done and awl with the swiss champ.
( I was just complaining about the file not being that useful in another thread. Guess that'll show me!
) -
-
@Jackpine54 said:
Day 5Today I needed to replace a drain pipe in the basement. The swisschamp was up to the challenge. I used the Phillips driver to remove a support strap. The saw removed the section of bad pipe and then cut the new one to the correct length. I used the file to smooth up rough edges on the cut. The tags on the new couplers were cut off with the scissors. Once I got the new pipe into place the coupler clamps were tightened with the large flat tip/ cap lifter. Finally, the awl was used to make a pilot hole and the Phillips to hang the relocated strap.
Awl done and awl with the swiss champ.
-
Day 5 of 60:
Inspiration struck....or was it hunger? Regardless, some basil leaves got clipped and carried in to be added to some chicken salad. (Left over chicken from the chicken wot got roasted a couple days ago.)

*No PVC was mutilated in the making of this meal. *
-
Inspiration struck....or was it hunger? Regardless, some basil leaves got clipped and carried in to be added to some chicken salad. (Left over chicken from the chicken wot got roasted a couple days ago.)

Yes! Trimmed plants today but no to eat!
*No PVC was mutilated in the making of this meal. *
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




nice... I cut a leaf off a house plant....