Electrician's MTs
-
I also enjoy seeing what others decide to buy/collect.

-
Here are pictures of the 2 I forgot:
Bear Jaws 155EL

Gerber Groundbreaker


-
Nice group! I have the Klein Electrician Hybrid and Leatherman Squirt EL.
The Klein is one of my favorites too. Aside from use of a Klein hawkbill (for scoring the outer jacket) and a small pair of Clauss USA snips (for the small inner wires); I was able to salvage an expensive heavy-duty extension cord with a damaged end (and I will also replace the other end, since someone yanked the ground out of the male end). For about 3 years, the Klein Electrician Hybrid was also my "good pair of strippers"; until I found our local Ace Hardware and State Electric carry decent electrical tools (both Klein, as it's a few independent places plus Lowe's is all we have here), and I bought a Klein.
While small, the Squirt EL is just the thing if your main electrical work is model trains or RC. That is where that little tool really shines in my use. But man, these things can be expensive. I paid $30 for mine. They were $40 new at "The Shack" back during my teenage years, but I couldn't afford them then.
Is the Commercial Electric any good? I've been tempted to order one every single time I am just under $35 when I do a Home Depot order, but end up ordering Knipex or Channellocks instead to fill that void.
-
@cody6268 said:
Nice group! I have the Klein Electrician Hybrid and Leatherman Squirt EL.The Klein is one of my favorites too. Aside from use of a Klein hawkbill (for scoring the outer jacket) and a small pair of Clauss USA snips (for the small inner wires); I was able to salvage an expensive heavy-duty extension cord with a damaged end (and I will also replace the other end, since someone yanked the ground out of the male end). For about 3 years, the Klein Electrician Hybrid was also my "good pair of strippers"; until I found our local Ace Hardware and State Electric carry decent electrical tools (both Klein, as it's a few independent places plus Lowe's is all we have here), and I bought a Klein.
While small, the Squirt EL is just the thing if your main electrical work is model trains or RC. That is where that little tool really shines in my use. But man, these things can be expensive. I paid $30 for mine. They were $40 new at "The Shack" back during my teenage years, but I couldn't afford them then.
Thanks!
I would carry an ES4 in my pocket for when I don't have wire strippers within reach, but they became shelf queens as soon as the retail inventory ran out and the going
price doubled. I have red and blue and paid less than $40 each for them new. I want a black one to complete the set, but I can't pull the trigger when the going price is $90.Is the Commercial Electric any good? I've been tempted to order one every single time I am just under $35 when I do a Home Depot order, but end up ordering Knipex or Channellocks instead to fill that void.
I haven't tried it yet (I assume you mean the 7 in 1, looks somewhat like a Buck Xtract). I feel that you spent your money more wisely on the Knipex and Channellocks, but I can't say for certain. I will try them out this week and let you know.
By the way, you can get the Commercial Electric 7 in 1 cheap on eBay. -
Here are a couple of more for the collection:

The Klein TripSaver is another one I have that I forgot about for the group photos. And the Toolzall Electrician 16 in 1 Multi Tool is a new addition.
-
I think the Commercial Electric stuff is really just junk and priced accordingly usually too. I was out of town a few years ago when a job "Popped" up and I had no tools with me so I bought a Commercial kit at HD with a decent numbersed assortment of tools and a bag and I got the job done but then gave the tools away and felt guilty about it and still do.
The Paladin are OK and are just special SOG MT with a few terrible specialized tools for wiring and not worth carrying either to me.
I now carry a set of Klein Dikes,Ideal Flex Strippers,Knipex Cobra,Wera Screwdriver with bits in the handle and a cheap but tiny DMM in my Briefcase at all times and along with my EDC Knife,Centerdrive and Lights I am good to go for almost anything routine it seems now.
I am just not trying to do work with any MT if I do not have to and I rarely have to!
-
Thanks to this thread...I just ordered the top photo bottom right electrician tool off of Amazon. Thank you for being an enabler, not that I need any encouragement. :D

-
Glad to be of help


-
Hmmm I need some wire strippers. Trying not to look at this thread....
-
It came in today. Not bad actually. Some hilarity ensued when I tried to open the pliers and not noticing the locking lever.
:D -
@Adam5 said:
Regular wire strippers will work better for you, but they will not come with all of the additional mediocre to poor tools
Tough choice then.

They would see most use on instrument cables (I need to re-solder some plugs).
I don't like wire strippers where you have to pull; it's hard to not pull the inner core out.
I have my eyes on some cheap grabby ones... -
Yes...I was like..what the smurf...this has never happened to me before....then I flipped the tool over and then I went


-
@Syncop8r said:
Hmmm I need some wire strippers. Trying not to look at this thread....One word, Klein.
These are pretty cheap (don't know how much they are in your neck of the woods); but I paid less than $20 at a local Ace Hardware; and they work really well.
Wire Stripper/Cutter, 22-30 AWG Solid Wire - 11047 | Klein Tools
The Klein Tools Wire Stripper/Cutter is a compact and lightweight tool for your stripping and cutting needs. Made from hardened steel for strength, it cuts, strips, loops and bends solid wire. The narrow nose reaches into confined spaces.
(www.kleintools.com)
-
Oooh this looks like what Adam5 has: https://www.kleintools.com/catalog/combination-cutting-tools/electricians-hybrid-plier-multi-tool
-
@pfrsantos said:
That's what she said!No, she didn't.
-
@Syncop8r said:
Tough choice then.
They would see most use on instrument cables (I need to re-solder some plugs).
I don't like wire strippers where you have to pull; it's hard to not pull the inner core out.
I have my eyes on some cheap grabby ones...The strippers you show just do the pulling for you and not as smoothly or as controlled as you can do yourself either.
I strip small cable every day and I am telling you that the best strippers are those with the correct size opening for your cable and that are really sharp and so NEVER used for anything else!
I find the Ideal ReFlex Strippers to easily be the best and better than Klein which are more made for Electrical work than Signal Cable work overall.
Then you need to learn to use the tool with your hand and other hands thumb controlling the pull so that you do not get any tearout as you suggest.
It is not hard but just requires a little practice like any other learned skill.So instead of using the tool to just cut insulation and then just yanking you use the tool around the cable and your other hands thumb like a lever point to gently and with control slide the insulation off of the conductor.
You can easily do this all the way through the shield and individual conductors if you can just visualize the process as you strip and try not to rush.
I know it is easy for me to say but once you learn this you should be able to easily strip any cable without tearing through anything!
-
Are there any other spring-loaded ones?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login