Daredevil Challenge 2021
-
Day 6 of 30
Got out the small ruler/file today :D Not much you can measure with at that size
The file is there and I guess better than nothing but it is almost nothing
:D I guess you can also use it as a flat driver
Probably better st that than the other functions
:D



-
@comis said:
A little surprised the chisel grounded serrated portion didn't get destroyed by the pull thru, they tend to be thinner and more delicate than usual PE.
:DI only sharpened the straight edge portion of the blade on the carbide pull through sharpener. I have a pocket size sharpening rod that comes to a point, so it is good for honing serrations, and will use that... as soon as I can find it.

-
Day 6

It almost made its mark on my palm today. I was trying to use it as needle nose pliers and had to grip it near the end of the handles. The tip slipped off of the item I was trying to grip and the handles snapped shut. The locking tab pinched me. Fortunately for me, my skin on my palm slipped out before the handles fully closed.
I agree with Cody that the pliers are very robust for a MT. But those handles don't work for me at all

-
Got out the small ruler/file today :D Not much you can measure with at that size
The file is there and I guess better than nothing but it is almost nothing
:D I guess you can also use it as a flat driver
Probably better st that than the other functions
:D



That ruler will be quite helpful in judging if a piece of lumber is 3/4" thick or 1-1/2" thick

By the way, don't know if you are aware of this, but the NXT comes in BO:

I think we both know what has to happen now

-
I didn't know there was a BO variant :ahhh

:D
I can usually eyeball measurements better than a lot of people
:D -
@Poncho65 said:
I didn't know there was a BO variant :ahhh
:D
I can usually eyeball measurements better than a lot of people
:DYeah, but with that ruler there will never be any hesistation on deciding if that piece of lumber is a 1"×4" or a 2"x4". Why take a chance on making that mistake? The ruler can make that determination for you :D
By the way, if you are lucky no one will question why you pulled out the ruler while sitting in your truck

-
**Day 6
**
More box opening today.I'm really liking the hook blade mod. Just need to sharpen it some.
Now I need to buy something in plastic clamshell packaging just to see how the hook works opening it!

-
I misplaced the thing. I'll try to get two photos up tommorow.
-
Nevermind.
Day 6; opened up a Camillus timber scribe. Always wanted one of these; but am surprised at how small it is. I always assumed since they were made for serious use, these were quite large knives.

-
Day 6
The Minimaster helped open a box with a couple Classics that will become part of gift boxes to my niece and nephew who are starting college later this month.

It also helped cut some cord for a carry loop on a water bottle.

-
Day 7
Cauliflower cheese with crispy smoked bacon …no hammers used in its production

-
Day 6
20210806_102010 by Humayd a r Mahomedy, on Flickri used the knife blade to separate some keys from a couple locks.
i'm digging the pics guys,looking good
-
@Sos24 said:
Day 6
The Minimaster helped open a box with a couple Classics that will become part of gift boxes to my niece and nephew who are starting college later this month.Now that's a nice idea! I wish I'd had a SAK in college.
Maybe also get them Deluxe Tinkers for any dorm room or apartment repairs?
Or that hammerhead monster that Echotech has? :D
-
Got out the small ruler/file today :D Not much you can measure with at that size
The file is there and I guess better than nothing but it is almost nothing
:D I guess you can also use it as a flat driver
Probably better st that than the other functions
:D



That kinda reminds me of the LM Free P4. It too has a 1.2 inch file which I have no idea what to do with it.

@Adam5 said:
Yeah, but with that ruler there will never be any hesistation on deciding if that piece of lumber is a 1"×4" or a 2"x4". Why take a chance on making that mistake? The ruler can make that determination for you :DBy the way, if you are lucky no one will question why you pulled out the ruler while sitting in your truck

Now I'm gonna remember this post whenever someone pull out a MT in a vehicle... :ahhh


It almost made its mark on my palm today. I was trying to use it as needle nose pliers and had to grip it near the end of the handles. The tip slipped off of the item I was trying to grip and the handles snapped shut. The locking tab pinched me. Fortunately for me, my skin on my palm slipped out before the handles fully closed.
I agree with Cody that the pliers are very robust for a MT. But those handles don't work for me at all

Maybe some tools are meant to be used with gloves...
@SteveP said:
**Day 6
**
More box opening today.I'm really liking the hook blade mod. Just need to sharpen it some.
Now I need to buy something in plastic clamshell packaging just to see how the hook works opening it!
I think one of the reasons why I like the small blade on SAK so much is because it's perfect for clam shell opening. It would be interesting to see how the hook works on that.

@Sos24 said:
Day 6
The Minimaster helped open a box with a couple Classics that will become part of gift boxes to my niece and nephew who are starting college later this month.

It also helped cut some cord for a carry loop on a water bottle.

Those Classics would be perfect for college students.
I still remembered having my SAK with me when I went to college, and no one ever seems to question whether it is 'allowed' on campus. But we sure do live in a very different time now. -
@comis said:
I think one of the reasons why I like the small blade on SAK so much is because it's perfect for clam shell opening. It would be interesting to see how the hook works on that.
My inspiration for the plastic clam shell opening use is the Cut-and-picker blade on my Mini Champ. It works really well at that.
-
Cauliflower cheese with crispy smoked bacon …no hammers used in its production

@Humayd A R Mahomedy said:
Day 6
20210806_102010 by Humayd a r Mahomedy, on Flickri used the knife blade to separate some keys from a couple locks.
i'm digging the pics guys,looking good
Nice use! How are you liking the Swisstool so far?
@SteveP said:
Now that's a nice idea! I wish I'd had a SAK in college.Maybe also get them Deluxe Tinkers for any dorm room or apartment repairs?
Or that hammerhead monster that Echotech has? :D
A SAK surely would come in handy, and with all the online ordering kids do nowadays, some kind of unboxing blade would really come in handy.
-
@SteveP said:
My inspiration for the plastic clam shell opening use is the Cut-and-picker blade on my Mini Champ. It works really well at that.You mean the orange peeler? I constantly have the fear that I might ruin the pivot or bend the tool if I force it with a heavy duty clam shell, but it sounds like it is worth a try. I may do that in some future challenge if the opportunity arises.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
