Daredevil Challenge 2021
-
Great pic, comis

-
Day 9 of 30
The pliers didn't quite help with this one
I still haven't used the pliers really yet ;) I still need to try the cutters out though 



-
That's a big nut--I know this is probably a dumb thought
, but just quite curious if the handles can pinch that nut and turn it opened by two hands? 
-
Day 9
The Minimaster helped open some packages. A few of which were more pieces to my niece’s and nephew’s care package.

It also helped to change the blade on my spool tool for paracord.

-
-
Day 09
-
Day 9;
Had to change the car's license plate from a WV temporary tag (issued by dealer) to a VA permanent. Could not find the "Big Screwdriver" that mostly sees use as a prybar; so I was stuck with the Swiza and my Tough Tool. The Swiza got it off alright, but I used the Tough Tool (USA original) to finish the job. The thick tip of the old "Perfect Handle" Korean War-era Irwin I have would've been MUCH easier. I didn't have my keys to get into the farm shop (where most of the tools are; and I had the thick tip of my Proto J-100 which is my only current keychain OPT), and no big screwdriver was to be found in the garage. Both of these were too thin (though the extra width of the screwdriver and the fat handle of the Schrade made it easier) for the job. Highly polished tools don't rust as much, but when it comes to screwdriving work, their constant slipping and sliding are annoying. Part of the reason these days, I mostly carry the Leatherman Bond or Rebar; and their matte bead blasted drivers.

On another note, the dealer didn't supply a front plate mount back in May (which should've been standard equipment with the car in my mind; given they're right across the VA/WV state line; and are owned by a businessman here in my county), and despite having ordered it on the 2nd, they still haven't gotten it in. So, looks like we're running with one plate. Can't just zip tie the plate to the front or buy a "one fits all" plate holder from the auto parts store; as due to the !@$% sensors, the proper front plate mount snaps in a specific hole, and does not screw on. You have to buy Ford's.
-
Day 10

-
@Sos24 said:
Day 9
The Minimaster helped open some packages. A few of which were more pieces to my niece’s and nephew’s care package.

It also helped to change the blade on my spool tool for paracord.

The care package gets better and better, moleskine/usb/Vic Classics/ID holder+purse, that's just plain awesomeness.
@Poncho65 said:
They wouldn't open any farther ;)Hope that the niece and nephew enjoy the care packages


Oh, that's what I meant, but that's just me trying to think outside the box, may not be good to the tool but I am trying to think what-if I must to get that loosen with no other options in hand.Had to change the car's license plate from a WV temporary tag (issued by dealer) to a VA permanent. Could not find the "Big Screwdriver" that mostly sees use as a prybar; so I was stuck with the Swiza and my Tough Tool. The Swiza got it off alright, but I used the Tough Tool (USA original) to finish the job. The thick tip of the old "Perfect Handle" Korean War-era Irwin I have would've been MUCH easier. I didn't have my keys to get into the farm shop (where most of the tools are; and I had the thick tip of my Proto J-100 which is my only current keychain OPT), and no big screwdriver was to be found in the garage. Both of these were too thin (though the extra width of the screwdriver and the fat handle of the Schrade made it easier) for the job. Highly polished tools don't rust as much, but when it comes to screwdriving work, their constant slipping and sliding are annoying. Part of the reason these days, I mostly carry the Leatherman Bond or Rebar; and their matte bead blasted drivers.

On another note, the dealer didn't supply a front plate mount back in May (which should've been standard equipment with the car in my mind; given they're right across the VA/WV state line; and are owned by a businessman here in my county), and despite having ordered it on the 2nd, they still haven't gotten it in. So, looks like we're running with one plate. Can't just zip tie the plate to the front or buy a "one fits all" plate holder from the auto parts store; as due to the !@$% sensors, the proper front plate mount snaps in a specific hole, and does not screw on. You have to buy Ford's.
Hmmm, now that you mentioned it, it does make good sense about the bead-blasted vs polished drivers. I did remember the polished driver would slip from time to time, but never notice it enough to compare it to bean-blasted.
-
-
-
Day 10
I needed a new hole in a belt I have not worn in a while. The can opener did a decent job making the hole. Much better at this than opening cans.

-
It may just be the angle of the photo but that only looks like half a can opener.
-

Oh, that's what I meant, but that's just me trying to think outside the box, may not be good to the tool but I am trying to think what-if I must to get that loosen with no other options in hand.
.I recommend caution. I didn't do exactly what you're showing, but I tried to use the jaws of a pair of channel lock pliers on too large a part, in a way the jaws aren't meant to be used. The result was very painful. :-[
-
@Alan K. said:
It may just be the angle of the photo but that only looks like half a can opener.Not an optical illusion. The design is really like it appears in the photo. It's weird. And bad.
/post/2180092@ReamerPunch said:
Gerber FlikSpoiler:
This is a claw, heavily modified, not only to make it fit in the tiny space they had available, but also to overcome how deep it is in the handle. The cutting edge sits at a different angle, so that the body of the tool will not be in the way when the edge and hook engage the lid.

If it was a traditional claw, with how deep it is in the handle, trying to engage the lid would have looked like this (Bibury 13 in) :

By moving the edge further back, the can opener edge and hook can engage the lid, with the rest of the tool away from the lid.
The can opener was seemingly designed to actually be able to open a can, within the limitation of space for a longer can opener.

Sadly, the good news, if any, stop here.

Piercing was easy. Holding the tool in an angle different to almost all other multi-tools was awkward. Once the can opener sinks as far as the edge will go, the tool is almost vertical. This alone makes the process challenging, but if only that was it.

Tracing is not easy. With most multi-tool can openers, you can go full circle around the lid without ever disengaging the hook from the lid. From the initial pierce to the final cut, the can openers are touching the can. With the Flik, this is not the case.
Not only does the vertical position of the tool mess with cutting, but the hook that would hold the can opener on the lid tended to slip off. Sometimes, when trying to advance along the previous cut, the edge would simply slide over the previous cut into the can, without making a new cut. Often, after a successful cut, the can opener would jam quite firmly into the lid.
The body of the tool was not bad ergonomically, but it did not matter. The process was not comfortable.

After the middle point, the lid was getting pushed into the can. I have never made such a mess with any other tool. I had to squeeze the can to force the lid to stay out of the food as I was trying to use the can opener for the second half of the lid.

It did not matter in the end. Nothing did. I discovered quite a few metallic shavings and burrs into the food.

You will be left with a lid with many jagged edges and sharp points, and a can of food that will be dangerous to consume. I kept seeing slivers in the food the more I looked, so I decided to throw away the food.

Why work around the space issue if the process of opening a can will be so awkward, and in the end ruin the food anyway? Drop the can opener, and make the Phillips square-shank, to make it stronger and fit the bit kit. This can opener is a disaster. It goes beyond being small. Even it being awkward to use would not matter all that much if it could open a can safely. But it cannot. It did a terrible job of opening the can, and most importantly, it ruined a whole can of food. Great job with this one Gerber. You matched the BuckTool's awfulness.

2 points for punching through.
0 for comfort.
0 for not jamming.
-12 for cutting.
0 for not slipping.Total: -10
-
@Fireman said:
I recommend caution. I didn't do exactly what you're showing, but I tried to use the jaws of a pair of channel lock pliers on too large a part, in a way the jaws aren't meant to be used. The result was very painful. :-[Good point, my silly suggestion is totally unorthodox/off-label use, so definitely not recommended for day-to-day operation.
@ReamerPunch said:
Not an optical illusion. The design is really like it appears in the photo. It's weird. And bad.
/post/2180092I followed the link and it surely is one crappy can opener, with all the metal shavings and what not.

-
<u>Day 10</u>

Used Wetols for lunch, and it really is just a walk in the park for the tool. Maybe it's my own OCD, I still can't get use to having random patina on my blades, and for that reason, I mostly prefer stainless blade for food use so I don't have to deal with the patina afterwards.
-
Day 10
the start of the double digits already :o
20210810_092028 by Humayd a r Mahomedy, on Flickr
knife blade use,i opened a package
20210810_092923 by Humayd a r Mahomedy, on Flickr
20210810_092926 by Humayd a r Mahomedy, on Flickr
and used the fine flathead driver to open a couple zip ties on my holster. this was a quick fix during "riot week" [widespread riots and looting here a couple weeks ago] until i got replacement loops [the package i opened today] -
@ReamerPunch said:
Those care packages are looking good! What a lovely idea, I'll put together a bunch of stuff for my niece.

Thanks. I’m sure your niece will appreciate.
@ReamerPunch said:
Day 10I needed a new hole in a belt I have not worn in a while. The can opener did a decent job making the hole. Much better at this than opening cans.

Good use and great job of continuing to lose.
It is sad when a tool is better at tasks it isn’t designed for than the one it is.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
