What do we have on the way?
-
A Sheffield Crocodile advertised as NOS and a large inexpensive router bit set.
-
I'm taking a COMPTIA IT class from the book publisher. Since it was online, and not with direct instruction; I at first thought it would not involve much hands-on stuff. After over a month, I was finally able to get into it. Boy was I WRONG. First thing was that it was recommended I buy as many secondhand PCs and laptops as I could get my hands on. I figured I'd ruin the first couple I worked on (due to my bad habit of using too much force), so the more the better. And there were a lot of tools I was missing. I had piles upon piles of screwdriver sets for small electronics missing the T5, T6, T8, T10 and tamperproof T-10 bits (which are found on my knives and tools), but ESD stuff and shims I was missing. The first module was replacing a laptop's hard drive, which was something I did need to do with one of the three old, disused laptops that were about 7-9 years old that I had. And, it just so happened the lesson was on a similar Toshiba model as I found. There is a flex cable running across the battery that has to be (carefully) removed.
Shims are cheap as chips, so I started with those. I will probably go through several styles before finding something I like.
For "shims" (plastic pry tools) I was tied between the Norton Universal Cleaning Stick (for firearms) from CountyComm and assorted purpose-built tools, so I got a few of each (because I'm going to lose them). I'm waiting on what other stuff I need to buy from CountyComm before I order those. Also going to try guitar picks. Visiting a local music store for those. Going for a pretty bright and wild pattern.
These are the first "shims" I've bought.

Now to find ESD tools that I can afford. I don't like Chicom stuff, but I can't afford the lines from the German tool manufacturers.
-
@cody6268 said:
I'm taking a COMPTIA IT class from the book publisher. Since it was online, and not with direct instruction; I at first thought it would not involve much hands-on stuff. After over a month, I was finally able to get into it. Boy was I WRONG. First thing was that it was recommended I buy as many secondhand PCs and laptops as I could get my hands on. I figured I'd ruin the first couple I worked on (due to my bad habit of using too much force), so the more the better. And there were a lot of tools I was missing. I had piles upon piles of screwdriver sets for small electronics missing the T5, T6, T8, T10 and tamperproof T-10 bits (which are found on my knives and tools), but ESD stuff and shims I was missing. The first module was replacing a laptop's hard drive, which was something I did need to do with one of the three old, disused laptops that were about 7-9 years old that I had. And, it just so happened the lesson was on a similar Toshiba model as I found. There is a flex cable running across the battery that has to be (carefully) removed.Shims are cheap as chips, so I started with those. I will probably go through several styles before finding something I like.
For "shims" (plastic pry tools) I was tied between the Norton Universal Cleaning Stick (for firearms) from CountyComm and assorted purpose-built tools, so I got a few of each (because I'm going to lose them). I'm waiting on what other stuff I need to buy from CountyComm before I order those. Also going to try guitar picks. Visiting a local music store for those. Going for a pretty bright and wild pattern.
These are the first "shims" I've bought.

Now to find ESD tools that I can afford. I don't like Chicom stuff, but I can't afford the lines from the German tool manufacturers.
Congrats on taking the course, you should look into ifixit tools, they're great quality and pretty reasonably priced.
-
Curved or straight jaws ? IIRC the straight jaw version was harder to find (but you don't see many of the curved jaw ones these days either)
Curved. I have a couple, but the price was too good so now I have another. :D
-
A lavalier mic and a tripod to start my own gear channel, hopefully the nerve and committment come included

-
@GearedForwards said:
A lavalier mic and a tripod to start my own gear channel, hopefully the nerve and committment come included

-
A new visor and pinlock insert so I can see where I'm going ::)
-
@GearedForwards said:
A lavalier mic and a tripod to start my own gear channel, hopefully the nerve and committment come included
Very best of luck!
-
Mini Knipex pliers and plierwrench
Vanquest pouch
Victorinox Folding paring knife

-
One of these, courtesy of Mrs Surge who is currently terrorising wine & smelly cheese sellers in Nice :mn:
Douk Douk Folder Red
The Douk Douk Folder Red was made in France and is based on a traditional French design. The knife is simplicity itself yet is extremely useful and will look great in your collection of red handled knives!
Heinnie Haynes (heinnie.com)
Obviously, it's not from Heinnie but it was the best link I could find :dunno:
-
@pfrsantos said:
Only difference I see, apart from $$, is the spine not being ready for firestel use. If the steel type is the same as in the "regular" Eldris, this can be fixed, right? Making it just like the "regular" one.

*Edit: Just found a few more differences...
*
https://www.youtube.com/watch?v=UVOVj433Yc4...and the blade grinds! But I prefer the simpler grind of the Light Duty
Incoming today is an unused Spirit that I just paid for at old price!


-
@an0nemus said:
...and the blade grinds! But I prefer the simpler grind of the Light DutyIncoming today is an unused Spirit that I just paid for at old price!


I got one of those earlier this year when DLT Trading was clearing them out for $60. It's my go-to these days. It isn't that heavy, but I get more tool selection than my Leatherman Bond or Rebar (well, aside from the fact it has no PE blade, but I carry a folder or traditional knife anyway).
-
For about $40; I have this lot of old tools. Probably overpaid.....
There is (what appears to be most of) what appears to be an SK Tools socket set from the late 1950s (to be completed if anything is missing and put in my main tool chest, as I already have a kit made with a Blackhawk ratchet and about a half-dozen brands of sockets I use regularly), a set of KD USA ratcheting wrenches (can always use those), some assorted Craftsman wrenches (unsure of era), Craftsman Vise Grips (always misplacing my regular ones--these will go in my truck), a Plomb (which later became Proto) breaker bar, a Montgomery Ward/Master 1/4 breaker bar and extension, Utica Pliers (bent and cutter--to go into my computer repair kit if not worn out), and a Craftsman 1/4 ratchet.
Plus, there's probably a bunch of sockets in the box that don't belong.

-
Looks like you got a deal to me. Around a $1 each if you count separate pieces. Most SK sockets go for $5+ on that auction site.

-
@Yadda said:
Looks like you got a deal to me. Around a $1 each if you count separate pieces. Most SK sockets go for $5+ on that auction site.

And everything is perfectly usable. I'll try to post some photos up tomorrow in the Hand Tools forum. The socket set is made up of SK, SK Wayne, Speed Master by Montgomery Ward, and Craftsman, as well as one Snap-On 5/8 deep well. The T-handle wrench is a Williams 1/2. The Utica snap ring pliers are still usable, but the cutters are shot. Those Craftsman Vise-Grips were never used. Heck, there was even dried-up factory oil on the screw. I saved the jeweler's screwdriver set, as I think they're still making them, and that way, I have the bits in this set as spares because I know I will lose one. Looks like someone used them, and then forgot to put the handle and whatever bit he used back in the pouch.
-
@cody6268 said:
I got one of those earlier this year when DLT Trading was clearing them out for $60. It's my go-to these days. It isn't that heavy, but I get more tool selection than my Leatherman Bond or Rebar (well, aside from the fact it has no PE blade, but I carry a folder or traditional knife anyway).That's definitely a steal! I'm loving my Spirit since the day I got mine [emoji1303]
-
@ReamerPunch said:
Mini Knipex pliers and plierwrench
Vanquest pouch
Victorinox Folding paring knife



-
I have on order a Knipex Cobra XS, and a 5CR + 6LR Irwin Vice-Grpe multi-pliers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login