Daredevil Challenge 2021
-
@SteveP said:
**Day 15
**
Quiet Sunday today. Some errands, but no use. So just an outdoor photo instead.Nice pic
Unexpected pressie from the company to cheer up the lockdown blues apparently …no complaints here

Nice gift
@ReamerPunch said:
Day 16I had ran out of ranger bands so I made more. The scissors are a bit of a let-down. They look huge, but they do not cut well. Especially bicycle inner tube, or other tricky material, you'll have to pull taut, and advance at a snail's pace.

Scissors are one tool that I find many manufacturers do not do that good with, especially compared to SAK scissors. They are probably my most used tool, so it can be frustrating when using a mediocre (or worse) pair.
-
@Sos24 said:
Scissors are one tool that I find many manufacturers do not do that good with, especially compared to SAK scissors. They are probably my most used tool, so it can be frustrating when using a mediocre (or worse) pair.I think that those few manufacturers who test them just do so on paper. The thing is, not only should the Flik have better scissors, they don't even cut paper that well.

-
Daredevil Day 16: I've been waiting to test the can opener, but we don't use a lot of canned goods. Swiss+Tech and I have our eyes on this can of condensed milk. It will happen before the challenge is over, but the anticipation is unbearable.


-
Great Day 15

Day 16 off to an excellent start as well

-
Day 16 of 30
NXT with me again :D

-
Day 16
IMG-20210816-WA0011 by Humayd a r Mahomedy, on Flickr
i opened a package :D
IMG-20210816-WA0012 by Humayd a r Mahomedy, on Flickr
which contained a small bundle
IMG-20210816-WA0013 by Humayd a r Mahomedy, on Flickr2new [old] SAKs

an Explorer and a Forrester -
2 new toys
Congrats, Humayd

-
Day 16
I cut my grass this morning. The MP600 pliers helped open the gas cap on the mower. -
@Humayd A R Mahomedy said:
Day 15
20210815_140616 by Humayd a r Mahomedy, on Flickr
20210815_140635 by Humayd a r Mahomedy, on Flickri always crush damaged cases before tossing them into the scrup brass bucket,makes for easier re-sorting down the line.
i'm finding the pliers [or handles rather] uncomfortable to use when clamping down on a workpiece,the edges bite backSorry to hear that, I don't have enough experience with the hand-pincher from Gerber to compare, but don't quite recall it was too bad from doing a challenge last year.

@Alan K. said:
Day 15
The contents of this packaging will soon be a new floor length lamp with a reading light. The MP600 is helping me to unwrap everything and will be used for any tightening of nuts and bolts that happen on the way.
Oh, I absolutely love those halogen lamp. So darn bright and really brighten up the room.

@cody6268 said:
Day 15: opened some PC repair gear. Taking a COMPTIA Core 1 A+ class right now online through Pearson, and I have mostly mechanical tools. While I own lots of small stuff for model trains and slot cars, it's not that extensive. This is predominantly pry tools and ESD preventative measures. The "Kalsi" kit I mostly bought for the plastic pry tools. The guy teaching the class used these, and the long oval tool for touch screens was what he recommended for prying up ribbon cable connectors. However, I think Countycomm's Norton's Universal Cleaning Stick will be my go to. Cheap, American-made, and flexible. I didn't have anything I needed from CountyComm; but iFixIt sold them as well. The rest of the stuff in this kit is mostly filler. The screwdrivers are known to be poorly made, and the metal spudgers appear made from pot metal. At least the bag and plastic pry tools are decent. The iFixit pry tool set has most of what I need in it. The stuff is, like pretty much everything they make, decent quality.
The first computer I'm upgrading (2014-ish Toshiba Satellite L75) is an utter toaster. It's got an Intel Pentium, which in 2014; was a slightly less powerful (fewer cores) low-power draw version of the then-current Intel i3. Only 4GB of RAM, and a 400GB hard drive. Since it's mostly a backup and used lightly, I'm going with 16GB of RAM (the maximum that a computer can use is recommended, which for this PC still isn't much; as that's the minimum recommended for Windows; and a 250GB SSD (you can't game on that PC even after my upgrades, so that's enough for work/school use). The computer I'm typing on (2020 Lenovo Creator 5i) has 12, but can accept up to 64GB. Until I get my skills to where I want them, old disused laptops of my own (I have three) and used desktops will be used instead. Going from 12 to 64 should make it much better for gaming. It's really good as it is, but the highly graphics-intensive games I play are a little rough. I may also replace the 1TB HDD with an equivalent SSD (which is not as problematic, as Windows is loaded on a 250GB SSD that is separate as per this PC's design (and I've filled up with the games that tend to have issues when played on a PC with a hard drive and not an SSD. I may build a gaming PC using a Dell Optiplex workstation as my chassis.
Thanks for the ifixit site, I don't remember ever coming across it but it could really come in handy someday.

The hard disk swap from HDD to SSD will be a major upgrade, I do a lot of photo editing/retouching on my computer and the hard disk upgrade really does make a difference.I did not need the TripSaver today, so I think I will share a couple of photos of the tool in its packaging. I bought it off of Amazon for $37 US. The usual price is $83 US:


It is slightly more expensive than I expected it to be. Wetols(that I used for this challenge is 22usd), it may be a super bulky tool, but I too am sure I get my money's worth of metal on that tool.

Unexpected pressie from the company to cheer up the lockdown blues apparently …no complaints here

Very nice!

-
@ReamerPunch said:
I think that those few manufacturers who test them just do so on paper. The thing is, not only should the Flik have better scissors, they don't even cut paper that well.
@Fireman said:
Daredevil Day 16: I've been waiting to test the can opener, but we don't use a lot of canned goods. Swiss+Tech and I have our eyes on this can of condensed milk. It will happen before the challenge is over, but the anticipation is unbearable.

I have learnt that it's a cardinal sin on MTO to use any pull tap on the can, <u>always</u> flip it upside down so you could use your can opener. :D
NXT with me again :D

Cool shot! 8)
@Humayd A R Mahomedy said:
Day 16
IMG-20210816-WA0011 by Humayd a r Mahomedy, on Flickr
i opened a package :D
IMG-20210816-WA0012 by Humayd a r Mahomedy, on Flickr
which contained a small bundle
IMG-20210816-WA0013 by Humayd a r Mahomedy, on Flickr2new [old] SAKs

an Explorer and a Forrester

-
<u>Day 16</u>

Little guy got a hold of me right after coming home from work, and wanted me to change batteries for his train set. Wetols is more than happy to provide the service. :D
-
<u>DAY 16</u>** **
Mrs Surge issued forth instructions (from foreign lands) that I might wish to water the garden

Not one to be pushed about I immediately acquiesed and watered said flora
Here's the OHT posing with a (well watered) fig


-
@Alan K. said:
Day 15
The contents of this packaging will soon be a new floor length lamp with a reading light. The MP600 is helping me to unwrap everything and will be used for any tightening of nuts and bolts that happen on the way.
I hope awl turned out well

-
@Fireman said:
Daredevil Day 16: I've been waiting to test the can opener, but we don't use a lot of canned goods. Swiss+Tech and I have our eyes on this can of condensed milk. It will happen before the challenge is over, but the anticipation is unbearable.

Those of us, of an age, may recall this 
https://www.youtube.com/watch?v=OMQR9DFE2-cFor those that don't know, this was a saturday morning kids show & sanitised version of the adult one (OTT) hosted by Chris Tarrant (Who wants to be a millionaire?) appearing here with Sir L.G Henry (Lenny Henry)
Accompanied by Sally James

-
The floor lamp assembly was easy and painless.
Much to my disappointment, it didn't require any tools. 
-
I remember Lenny Henry from "Chef." I think his treatment of the juniors in the show must have been Gordan Ramsay's inspiration. Boy, they'll knight anyone these days huh?

-
Day 16 Bonus pick
I just received the Pay it Forward 2021 package from Grant and used the MP600 to open it. -
@SurgeUk said:
Those of us, of an age, may recall this 
https://www.youtube.com/watch?v=OMQR9DFE2-cFor those that don't know, this was a saturday morning kids show & sanitised version of the adult one (OTT) hosted by Chris Tarrant (Who wants to be a millionaire?) appearing here with Sir L.G Henry (Lenny Henry)
Accompanied by Sally James

ah that takes me back Surge, watched it every Saturday without fail as a kid
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login