Vics and bicycles
-
@old Lefty said:
^^ and ^
Riding Rover safety bicycle must've been an experience!
Guv'nor's geometry is that of a 1930's Path Finder up to North Road drop bar. Quite relaxed by today's road bike standards but not the best for busy city driving methinks. Mine comes with Sturmey Archer 3 speed hub, there is also a five speed version (or maybe that is called Speed 5, dunno) and somekind of Morgan tie-in modelLähetetty minun SM-T515 laitteesta Tapatalkilla
It definitely was - quite scary as it was a museum piece! As you’d expect, very relaxed handling, very smooth, but quite heavy - a machine for its day and the roads of the day - never tried an Ordinary (aka Penny Farthing) too scared to try! Let alone ride a six day race on one in Maddison Square Gardens - just imagine that! Terrifying- track banking on an Ordinary! Bad enough on a standard track iron, let alone 3 foot/1 metre up!….

-
XAVT resting on Moulton frame:

XAVT was my ’bike emergency tool’ for mornings 2,5 hour ride in rain.
Rain stopped pretty much in sync with the ride, so I got to wipe most of dust and road grime off right away:

Sent from my iPhone using Tapatalk
-
That's a very smart Moulton Old Lefty. I have had a thought about them from time to time.

-
Cracking pice, Old Lefty!

-
Moultons are rare here on the East Coast of Canada.
-
^, ^^ and ^^^
Thanks gents! They are very rare down here as well. In my 6 years of Moulton ownership I’ve never seen another.
Sent from my iPhone using Tapatalk
-
Took the Helkama for Run to the shop this morning.
Hear it poses with the XAVT, dirty from road grime and rain…


…which of course stopped as soon as got back home..Sent from my iPhone using Tapatalk
-
Always good to have a hack bike for bad weather riding!

-
No pics, but I used only SAK tools to put a rear rack on my beach cruiser. 10mm wrench from a Snowboarder, multi-wrench for the 8mm nuts, 4mm hex from a Cybertool, and the ‘02+ in-line phillips which I’ve discovered fits 6mm hex.
Now if only I could have all that in one SAK…
-
That sounds like a mod project, Kamakiri!

-
@Rizio Il Ghiro said:
That sounds like a mod project, Kamakiri!
Yeah…but probably gonna take a while to get more donor parts! I don’t buy a lot of Wengers…and I have a hard time imagining pulling apart the rare-ish bike tool if I ever find one for the 10mm wrench with the added spoke tool. And I’ve only really looked at adapting the multi-wrench into 91mm Vics…not so sure about going the other way round with Vic tools in the 85mm frame.

-
Zombie thread alive!
Restored and put together this 1995 Cannondale M500. It does no longer sport the original parts as I went for period correct Shimano XT and some other upgrades - to my personal taste.


If you are wondering about the Vic... It is in this one (on the table behind the bike).


Very useful kit tinkering with bikes.
-
NICE!

JR -
Thanks!
In October I did this 1992 Diamond Back Axis Pro.


And the Vic (look closely)


-
I enjoyed taking the mountain bike on a few trails over the summer break.
<a href="https://postimg.cc/DS5Npxwf" target="_blank" rel="noopener noreferrer"><img src="https://i.postimg.cc/nLttz58m/IMG_0638.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I took the companion along.
<a href="https://postimg.cc/mP7q3T0J" target="_blank" rel="noopener noreferrer"><img src="https://i.postimg.cc/JzFLLnKr/IMG_0636.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
