Spirit owners club
-
I've had similar experience with mine. That blade performs way above expectations. Sharpening it is something I haven't had to do yet.
-
Victorinox serrated blades are great, I don't have it on the Spirit but on an 08 Soldier. Which I believe is the same step of serration. The sharpening is pretty easy with the Victorinox dual sharpener pen. I don't use the ceramic "X" part but the grey one. Firstly sharpen only at the side where the serrations are cut. Blade at appropriate angle and put one "tooth" of the serration in the groove. Draw the knife across the sharpener without that tooth leaving the groove. Repeat 2-3-4 times per tooth until you get the hole blade. Then turn the knife and stroke the other side 2-3 times as you'd sharpen a standard knife. That's it.
-
oh and what tools does it have please?

-

Chisel tool helped open a box

Beauty shot while walking the dogs

-
Chisel tool helped open a box
[**img]https://www.justbenphotography.com/img/s/v-10/p2888749681-4.jpg[/img]
Beauty shot while walking the dogs**

Great tool, and gorgeous picture SirVicaLot.

-
Got one of these elusive MXBS's on the second hand market:

Seller was 30min from me so this was too good to pass.
-
...didn't know these actually exist 
How do you like the protruding oho knobs Nick?
-
Admittedly, they take getting used to.
Regular use while holding it in a hammer grip works well as my fingers are placed behind the knobs.
Opening the regular blade does push the knob from the rescue blade in my hand a little but nothing unbearable.Apart from that, opening and closing the blade feels a bit like a Benchmade Axis lock which is still my most favourite locktype to date.
So I'm a bit on the fence...
It works, and it works well but I can't help myself but feel as if it's a solution that was cobbled on an existing tool.The fact that it's rather unique at this point does add to the charm and opening/closing a Spirit's blade single handedly in a smooth operation is something I wasn't dreaming of experiencing a few weeks ago.
I should also mention that I looked at Ethrealicer's post about it a few months ago and he mentioned that the sheath deformed from the knobs.
I got a completely different type of sheath!
A nylon Molle sheath with velcro closure, no Vic markings apart from a yet unknown item number on the back. To me it looks like a military order sheath so I can only assume it's the sheath that has been requested by the Australian defence forces.
The tool sits perfectly inside and the knobs are completely clear of any interference of the sheath. -
...I think I'll not try to get one of these. I rarely need an oho blade. And it does seem to disturb the sleek lines of the Spirit 
-
@McStitchy said:
...I think I'll not try to get one of these. I rarely need an oho blade. And it does seem to disturb the sleek lines of the Spirit 
You can try your very best and still not get one :D
Rumours are it might be released for the Australian civilian market in October though. -
@McStitchy said:
...I think I'll not try to get one of these. I rarely need an oho blade. And it does seem to disturb the sleek lines of the Spirit 
Don't like these knobs at all. I'll stick with the 5 regular Spirits I already have :D....i might have an issue... :ahhh
-
This one brought me to 6

-

One of us, one of us! :D
-
@Ike582 said:
Hey folks, I've never owned the Sprit but have had a few Leatherman tools over the years. I'd order a Spirit if I can convince myself there's a legitimate difference between the two. Aside from the possibly different tool combinations, how would you differentiate the qualities of Vic Spirit from the Leatherman? Help me buy one!I was like you since I owned more Leatherman MTs and a few Victorinox SAKs, but never a Victorinox MT....until yesterday. I've been rationalizing that my Rebar and ST300 are all the medium and large sized MTs I need and have been ignoring the SwissTool and Spirits.
But yesterday I finally got a Spirit and all I can is WOW. You really have to experience it by touching it to know the quality build is much better than a Leatherman. It feels like a precision tool...and even a man's jewelry.
What makes it better than any LM is the lifetime warranty Victorinox gives, I've read! My Spirit is a keeper and I'm so happy to be a member of this prestigious club!

-
@an0nemus said:
I was like you since I owned more Leatherman MTs and a few Victorinox SAKs, but never a Victorinox MT....until yesterday. I've been rationalizing that my Rebar and ST300 are all the medium and large sized MTs I need and have been ignoring the SwissTool and Spirits.But yesterday I finally got a Spirit and all I can is WOW. You really have to experience it by touching it to know the quality build is much better than a Leatherman. It feels like a precision tool...and even a man's jewelry.
What makes it better than any LM is the lifetime warranty Victorinox gives, I've read! My Spirit is a keeper and I'm so happy to be a member of this prestigious club!

Welcome to the club!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



