powerlock owners club,
-
@israelpiper said:
PowerLock S60 and old coins

Nice pic!

-
Please find attached my membership application form.
-
Nice DT

Sent fra min FRD-L09 via Tapatalk
-
Not much action here for a while.
My Powerlock was a big help in putting the bed in the new guestroom together.
Great idea to put a 1/4" bit driver on the PL

Sent fra min FRD-L09 via Tapatalk
-
Not much action here for a while.
My Powerlock was a big help in putting the bed in the new guestroom together.
Great idea to put a 1/4" bit driver on the PL

Sent fra min FRD-L09 via Tapatalk
Good work! The PL is a good choice for that sort of job.

Thanks gerleatherberman

It works very well, and the handle feels good in hand when turning the screws
Sent fra min FRD-L09 via Tapatalk
-

May have to pair a PL with the challenge tool tomorrow. :) -
SOG PowerLock: Added thumb rest for close work

A small thing, but for me adding the opener to the open blade helps with diminishing thumb pad irritation. Since the serrations are, by my reckoning, backward, I don't have a straight blade edge down by the close end. No push-cuts. The added thumb rest just feels better when using the straight edge upper half. Better force and balance. I like smaller combination blades on multitools, but as Victorinox does it for many pocket knives (in the right place, and YES easy to sharpen). Straight blade close-in, for push-cuts. The SOG PowerLock isn't my go-to MT for bushcraft by any means, partly because of the blade. But I stumbled on the use of the open blade and opener together, as a work-around slight improvement. I use double or triple tool openings on my SwissTool Spirit for the large driver/pry bar, and on the SwissTool I back the chisel with the large driver/pry bar; the large driver and awl on the LM Surge for starting a number of screw and controlling depth. Small useage techniques which add up to greater utility, for me at least.
-
Great tips, israelpiper!

-
My first SOG arrived today




Thanks Fuzzy
The snail mail was snaily, but it made it :D -
You're very welcome.

-
WARNING-NECROTHREAD REVIVAL!!!
I know it's been 7 months since some kind of action had been seen here but, I had to have at least one representative of the SOG group; from what I'd seen, it was the PowerLock that got my attention and, finding one B61 "discounted" helped my decision making. Love the burnished stainless steel, the smoothness of the pliers mechanism, the ability to open/close the pliers Balisong-style and, that compound leverage is pretty awesome. The nylon sheath that came with the tool can fit the bit kit along with the PowerLock (although I made a "divider" so that the bits don't come out or get on the way as I return the tool) and it's not too obstrusive. The tool's driver are good, as are the openers (and liking a lot the awl!). On the other end of the spectrum, the scissors struggle cutting even string/threads, particularly if using just the tip; the combo knife, although razor sharp, if flexes considerably. Wood saw blade is good, but I find quite short (reminds me of the cutting area of the Surge' curting area). The bit driver is nice but, it's difficult to use at 90 degrees as the cover does not have a cutout for it to pass thru, havinh either to remove the cover or keep the tool fully open! The file, although not even on par to Gerber's MP standards, the double cut side is good (the single side is pretty good on my fingernails; take that, PAD!) But the "cutting/deburring edge" is non functional in mine; it feels more like a rough edge than a cutting surface. My only grieve is that, unlike Vic's Swisstools or most Leathermans (Leathermen!?!?), I can't open the handles "180degrees" to use the tool as a long, center driven screwdriver. But, I think its a pretty good tool in all and I'm beginning to appreciate it. So, here it is!!!! [attach id=0 msg=2329101] [attach id=1 msg=2329101]


-
Does anyone reading this know how to date these tools? Can't find a date code on the tool itself or the box.

-
That Powerlock looks pretty nice. I got a used older Powerlock that was a little too used. One side now fails to lock under minimal tension. Just wondered how well your Powerlock locks?
-
Thank you, Hvac. To tell you the truth, I'm OK with it; contrary to what most reviews say, mine locks solidly all tools from either handle ( and I even tapped/banged the spine of blade, saw, file) and, although with a very fine cut, the single and double cut file are adequate (the edge one is another story). Maybe because it might be a late production?I also like very much the burnished finish over my Wave's or MP's matte finish. The only things that I'm not very fond of are: the combo blade's chisel cut
bevelgrind, how thin and flexible the knife is, and the scissors. BUT, for anyone looking for an exonomical multi and who aill be using the blade and scissors secondary or as back up tools, I wholeheartedly recommend the Powerlock. -
Today's kit ... [attach id=0 msg=2331876]

-
[attach id=0 msg=2362625]

-
Just in! An SOG S60N-CP; promise, no more ... well, except if I find a good-value for a Black Tip!!!
[attach id=0 msg=2363658]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
