Curl Owners Club
-
I was thinking of starting a "Leathermans and Bourbon" thread, but I decided to post here instead

Enjoying a little Woodford Reserve Double Oaked

-
As requested, here’s my review after using it over a 3-day weekend.
First, here is my intended role for the Curl: When I am working on a project that I know will require a tool, I carry a tool like my Wave or Surge. The rest of the time, I carry something smaller that fits more comfortably in my pocket, like a Wingman. That is why when I saw a review comparing the thickness of the Curl to a Wingman/Sidekick, I knew I had to get it. Note: over the weekend, I replaced a ceiling light, and this would normally be a project that would make me reach for my Wave, but I used the Curl to help with my review.
Overall Size: I was initially worried because it’s just slightly larger than my Wingman, but it still fit in my pocket very comfortably. It has just about the perfect width, thickness, and length that I didn’t even feel it when I moved around or sat down.
Overall “fit and finish”: Yes, like most Leathermans, it’s a thing of beauty! Everything works smoothly and there’s no play in any tool. It has none of the “QC problems” that some people report, likely after they abuse/misuse their tool then pretend that’s the way it arrived from Leatherman.
Pliers: I only used the pliers once to adjust several anti-siphon valves, but it was a good reminder why I carry pliers-based multitools rather than a Swiss Army Knife. The pliers worked as expected, and they are thicker than both the Skeletool and Wingman so I’m sure they can stand up to more abuse.
Wire cutters: They’re wire cutters. I used them to cut several wires while replacing a light, and they worked perfectly. I wish they were replaceable, but that’s probably unnecessary for lighter tools.
Blade: The Wingman’s partially serrated blade works well for my need, but it’s a pain to sharpen. That’s why I appreciate that the Curl has a plain edge blade. It’s actually a little longer than I would have chosen, but I got used to the length quickly. It performed well for both light work (opening several Amazon deliveries and a bag of bird seed) and heavier work (breaking down boxes).
File: I know a lot of people don’t like the full-sized file on the Curl. I don’t often need a file, but when I do, the small half-sized files on many multitools (Leatherman included) are almost useless. That’s why I am very happy that the second full-sized tool slot is a file. I just needed it once this weekend – to file the end of a mounting strap so it would fit in the outlet box – but it confirmed the need of a full-sized file.
Can/bottle opener: A can opener is probably the most ridiculous tool common on many multitools, that’s why I really appreciate that Leatherman makes the combination can opener, bottle opener, and wire stripper tool. I didn’t need to stop my covered wagon on the side of the Oregon trail to open a can of vittles, so I didn’t test its can-opening ability. It opened a bottle fine, and it stripped the ends of a couple wires on a ceiling light with a little effort. I also tried to use it to open a box and a package, but it didn’t work well for those uses (I guess I would have to sharpen it first).
Bit driver: It’s a Leatherman bit driver. I normally just use the Philips end, but this weekend I used the flat head to adjust some sprinklers. Not much more to say here.
Flat head/pry tool: Having a pry tool is a very important tool for me so I don’t break another tool that’s not designed for this. I used it twice - to straighten a post on an outlet box, and to open a home security camera. It worked as expected.
Scissors: This one was a surprise because I normally avoid multitool scissors – they often don’t work well, and I almost always carry a Micra. I’m also one of “those guys” that says “why do I need scissors when I have a knife?” While changing the light, I had 2 incidents where a knife wouldn’t work well – removing a tag tied deep behind a light shade, and removing a wire tie. I tried the Curl’s scissors on both, and it worked perfectly.
Awl: I didn’t get a chance to awl anything, but I am happy with this tool selection. I think the only other tool that I would have preferred instead would be a package opener.
All Interior Tools: I have seen several people complain that the interior tools do not lock, but I found the slip joint to be firm enough to avoid any problems. Sure, I would have preferred to have locking interior tools, but I suppose that would have driven the price up.
Anyway, I hope this review helps someone. For its role (lighter, comfortable pocket-carry tool), it is a huge upgrade from a Wingman/Sidekick. It’s definitely no replacement for bigger and “better” tools like a Wave, Charge, Surge, Free P4, Super Tool, etc, but I don’t think that’s its purpose. Personally, I am extremely satisfied with the Curl and it will certainly become my most carried Leatherman (not counting my Micra, of course).
-
Very thorough review
I am so glad to see that it met expectations
It is on my list for sure but will be a while before I get one either way 
Has almost every tool I would want on a tool and nothing extra (well except a can opener, which I can sharpen to make a package opener ;) :D ) Love tjat it has the diamond file as well

-
I only sharpen the end and by looking at it you don't even know that it is sharp enough to be a package opener ;)
So should be a voided warranty no more than sharpening the knife or an awl
:D -
I’m glad you like the tool. I think it has a good selection of tools. I have the Bond and the tools hold in pretty well. I just don’t understand why the blade locks as I think it would sell much better in Europe if it didn’t. I also think the price is too high but we’ll see.
Sent from my iPhone using Tapatalk
-
@gadgetman7 said:
I just don’t understand why the blade locks as I think it would sell much better in Europe if it didn’t.Then it wouldn't sell as well in the US - I know I wouldn't have purchased it. Maybe they need to make 2 versions.
-
@Rich_SD said:
Then it wouldn't sell as well in the US - I know I wouldn't have purchased it. Maybe they need to make 2 versions.I wouldn't buy it either (I probably still won't, but that's beside the point).
I'm not usually a stickler for locking blades, but I agree in the case of Leatherman's one-hand-opening blades on the Wave/Charge, Sidekick/Wingman/Rev....and now the Curl. The way these multitools are designed, there's just no way to incorporate a solid, heavy-duty spring (like you'd get on a non-locking SAK) without substantially redesigning the tool. This is especially the case on the Wave and Curl, where the blade pivot is only supported by the frame on one side of the blade; a strong spring would likely lead to the pivot bending. I say this based on my experience of disassembling and modifying a SAK.
The only way to have a non-locking blade would be to use a backspring similar to the blade on the Style CS/PS, where the side of the handle behind the blade pivot is used as a backspring. Such a design is fine for a keychain multitool, but I wouldn't trust it on a full-size MT like the Curl.
I think Leatherman made a great decision to make the Bond slipjoint. With that design, the blade can't fold on your hand because it will hit the end of the other handle first.

-
I think it’s over priced, doesn’t distinguish itself enough price or size wise when compared to the Wave, and I just ordered one [emoji2960]
Sent from my iPad using Tapatalk
-
@dmattaponi said:
I think it’s over priced, doesn’t distinguish itself enough price or size wise when compared to the Wave, and I just ordered one
Sent from my iPad using Tapatalk

-
@dmattaponi said:
I think it’s over priced, doesn’t distinguish itself enough price or size wise when compared to the Wave, and I just ordered one [emoji2960]The size was the most important factor for me. I probably would have purchased it even if was the same cost as a Wave. You're going to love it :)
-
@dmattaponi said:
I think it’s over priced, doesn’t distinguish itself enough price or size wise when compared to the Wave, and I just ordered one [emoji2960]Sent from my iPad using Tapatalk
Spoken like a true member of MTO



-
Haha, thanks everyone for the comments. It was the one handed blade, the pocket clip, smaller size and weight and the addition of the scissors and awl that got me :-). I’d been toying with the idea of a Wave for a while and thought the carry-ability of the Curl was appealing. I would like it better at $69 :-)
Sent from my iPad using Tapatalk
-
Now you need a Wave to compare it to



-
@dmattaponi said:
I would like it better at $69 :-)You would like it even better for $29 ;)
-
For that price I would buy 2
maybe even 3 
:D
-
That's what I paid for my first Leatherman, a Sidekick, in early 2013. Oh, how the times have changed!
-
@hsherzfeld said:
That's what I paid for my first Leatherman, a Sidekick, in early 2013. Oh, how the times have changed!I think I paid £27 for my Rev around the same time... I miss that money

-
@dmattaponi said:
I think it’s over priced, doesn’t distinguish itself enough price or size wise when compared to the Wave, and I just ordered one [emoji2960]Sent from my iPad using Tapatalk
It is not overpriced. Its outrageously overpriced here. And I just ordered one too. Why? I have been looking for a quality pocketable multitool with everything I need, and nothing I don't need. The Curl's spec looks as close as it can get based on whats available in the market today. My Skeletool CX was damn close to my perfect EDC but it lacks the scissors which I use often. Its the Curl's straight edge blade, pocketclip, scissors, bit exchanger, awl that sold me. If Leatherman replaced the file with a saw (useful for my hikes) it would be the perfect EDC multitool for me. I will see if the Curl fulfils my expectations when I recieve it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login