Daredevil Challenge 2021
-
Day 18
Native Florida Everglades tomatoes! -
@Alan K. said:
Day 17
I cut some banana peel into strips to give a potassium infusion to some potted plants that could use a boost.Interesting use and trick, which I will have to remember.
Noticed on this and recent challenges that I use the knife way more than anything else on an MT, always good to have the other tools handy of course hence carrying a MT rather than just a knife but actually surprised me how much that’s the case
Opened some packages and a flea/tick prevention tablet for Coco

Good observation.
My MT knives don’t tend to see a lot of use except during challenges. I frequently carry a separate knife (traditional or SAK) with my MTs that I usually grab first if I have just a cutting task.
-
@ReamerPunch said:
Day 18 continuing...Going over my bowdrill set again. I decided to trim the fork on my bow.
I do not like the saw on the Flik. It binds way too much. The teeth are tiny and not that aggressive. Granted, it makes a smooth, clean cut, but it takes too long, and it is not a comfortable experience because the tool is so angular. And these were twigs. It'll be worse as wood gets thicker. I remember my Rebar laughing its way through wood during the Nessmuk Challenge. Now that's a saw.
I kinda regret doing this. The bow looked better before. But the fork does not need to be long. So it'll do. And I saved three grams.

As this challenge goes on, I think it has been good on a possible unexpected level. We are knew it was probably going to highlight things we don’t like in the MT. But I think in doing that it also helps emphasize things that sometimes get overlooked for what makes a good MT. Smoother edges, saw teeth, tight scissors, angle of tools, nail nicks, tension or lock-up (even on non-locking tools).
-
@ReamerPunch said:
Day 18 :ahhh
Kinda early, but I just received a lovely Bark River Knives Bravo-1! With thumb-ramp! :ahhh

I can knot believe how nice it is! And so comfortable! I do knot have any knife as comfortable as this.
I love it. Thanks so much, Jack!

I have a couple smaller Bark River knives that I love. They very nice knives. I’ve been considering in investing in a larger one, even though I know I don’t need it.
-
Day 18
The TripSaver comes with a sheath and 5 bit drivers: 2 straight drivers, 2 Phillips drivers, and a 1/4" socket adapter.



It is a bit awkward to drive screws with the MT given the placement of the bit holder, but it is doable and plenty of torque can be generated.
-
Daredevil Day 18, Supplemental:
I got a little carried away deleting pics on my image host
so here it is again. 

-
Excellent pics today, everyone

Bonus pic Day 18

Finally used a bottle opener 8) I got to pick my girl up from school today and we stopped on the way home to get some chips, cheese dip and salsa from our favorite Mexican Restaurant
and I got a Fanta to go with it 
The bottle opener worked great on the cap


DISCLAIMER.... I am not a lefty and this pic was merely used to show that I used the bottle opener

-
@Poncho65 said:
Excellent pics today, everyone

Bonus pic Day 18

Finally used a bottle opener 8) I got to pick my girl up from school today and we stopped on the way home to get some chips, cheese dip and salsa from our favorite Mexican Restaurant
and I got a Fanta to go with it 
The bottle opener worked great on the cap


DISCLAIMER.... I am not a lefty and this pic was merely used to show that I used the bottle opener

I was going to make a joke, but then remembered the song is "Pancho and Lefty", not Poncho and Lefty"

I am glad that the awl and bottle opener work well for you.
From the picture it looks like your hand may be a bit larger than mine, or at least your fingers are longer (I have thick palms and short fingers). What do you think of the NXT's handle splay? People complain about the Rev's handle splay, but I was comparing the Rev and the NXT today. The NXT is wider. If they weren't spring loaded, I wouldn't be able to easily use the NXT pliers. -
By the way, glad you got to spend quality time with your daughter

-
Day 18: used the awl to open some cheap miniature pliers I picked up at Tractor Supply for a computer repair kit.
These are pretty much smurf. Most of the others will do for non-computer jobs when nothing else will, but the small cutters don't work period. Those were the ones I needed, for cutting small zip ties. What sucks is that while stores here (Lowe's, State Electric Supply, Ace, Fastenal) do carry the larger tool ranges of Proto, Klein, and especially Channellock; the real small stuff they don't stock, usually putting that upon their el-cheapo makes.

-
@cody6268 said:
Day 18: used the awl to open some cheap miniature pliers I picked up at Tractor Supply for a computer repair kit.These are pretty much smurf. Most of the others will do for non-computer jobs when nothing else will, but the small cutters don't work period. Those were the ones I needed, for cutting small zip ties. What sucks is that while stores here (Lowe's, State Electric Supply, Ace, Fastenal) do carry the larger tool ranges of Proto, Klein, and especially Channellock; the real small stuff they don't stock, usually putting that upon their el-cheapo makes.

Is there a Home Depot within reasonable driving distance of you? It appears that most of the Home Depots in North Carolina and Virginia carry these Klein 5" wire cutters:
Diagonal Cutting Pliers, Flush Cutter, Lightweight, 5-Inch - D275-5 | Klein Tools
The Precision Flush Cutter offers added comfort for cutting applications that demand precision and control. Improved knife design on these pliers snips soft wire up to 16 AWG for a flat, flush cut. The ultra slim profile increases access in confined areas. Grips designed for greater control while the steel return spring adds comfort when making repetitive cuts. The blades are heat treated for long life. This is your go-to tool when you want precision and control when cutting small wire, zip ties and other fine material.
(www.kleintools.com)
PM me if you need help getting these cutters (assuming they are suitable for you).
-
This is only a quickie
as I now have grandson sitting duties (short notice :ahhh )Here's the OHT posing with a haul of biscuits for the work "Tea Club" (they like custard creams ::) )
I would require milk to go with those custard creams. I am not refined enough to drink hot tea :D
-
@Adam5 said:
Is there a Home Depot within reasonable driving distance of you? It appears that most of the Home Depots in North Carolina and Virginia carry these Klein 5" wire cutters:
Diagonal Cutting Pliers, Flush Cutter, Lightweight, 5-Inch - D275-5 | Klein Tools
The Precision Flush Cutter offers added comfort for cutting applications that demand precision and control. Improved knife design on these pliers snips soft wire up to 16 AWG for a flat, flush cut. The ultra slim profile increases access in confined areas. Grips designed for greater control while the steel return spring adds comfort when making repetitive cuts. The blades are heat treated for long life. This is your go-to tool when you want precision and control when cutting small wire, zip ties and other fine material.
(www.kleintools.com)
PM me if you need help getting these cutters (assuming they are suitable for you).
Thanks! I wasn't aware they existed. The nearest one is about an hour and a half away, but I order stuff online from them when I can't find it at Lowe's or a local hardware store. They are also about half the cost of the other USA-made options I had looked at.
-
@Humayd A R Mahomedy said:
congrats,the Bravo sure looks goodDay 18
20210818_144710 by Humayd a r Mahomedy, on Flickr
awl use today
20210818_144725 by Humayd a r Mahomedy, on Flickr
twist to the right...
20210818_144717 by Humayd a r Mahomedy, on Flickr
then to the left
20210818_144820 by Humayd a r Mahomedy, on Flickr
and final tightening with the pliersNice shots of the SwissTool at work, Humayd!
-
@Adam5 said:
I was going to make a joke, but then remembered the song is "Pancho and Lefty", not Poncho and Lefty"
I am glad that the awl and bottle opener work well for you.
From the picture it looks like your hand may be a bit larger than mine, or at least your fingers are longer (I have thick palms and short fingers). What do you think of the NXT's handle splay? People complain about the Rev's handle splay, but I was comparing the Rev and the NXT today. The NXT is wider. If they weren't spring loaded, I wouldn't be able to easily use the NXT pliers.I haven't really paid attention that the splay is to much
I guess I just adapt to pliers without thinking much of it 
I ahve never considered my hands to be overly large so maybe the pic is making them look bigger than they are :D
Yes, we had a good evening, thanks

-
@cody6268 said:
Thanks! I wasn't aware they existed. The nearest one is about an hour and a half away, but I order stuff online from them when I can't find it at Lowe's or a local hardware store. They are also about half the cost of the other USA-made options I had looked at.I have been looking at them for awhile at Home Depot (there are 6 different Home Depots that I visit with some regularity, and 2 more I go to sporadically), but I don't have a good enough reason to buy them. I primarily work with heavier gauge wire.
-

Thank you to many good wishes!
No use today, but just posting next to the meds for little guy.Turns out he got salmonella(got the result just back from lab) and been having diarrhea the entire day, the whole thing must be pretty confusing and frustrating for him.
Doctor has suggested to eat plain food, no dairies and sip on oral rehydration salt water. Seems like ORS is the standard of care for children diarrhea, and could cure 90% of mild-moderate diarrhea according to WHO. So it's probably something nice to have at home.
I may still need to attend to the little one 24/7 in next couple of days, so please do pardon me for not being as responsive in next couple of days.

Hope he recovers quickly

-
**Day 18
**
Mrs. P said my dessert looked like a picture. So add SAK and we have today's picture.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login