What did you use your Sak on today?
-
@SteveP said:
It's great that you're giving that SAK a second life.

Thank you both!!

@Altis said:
Deluxe Explorer helped me fully restore a small guitar and change the strings on a normal acoustic. The small pliers are perfect for the fine tasks of feeding and pulling strings, as well as cutting them.
Any use on a git-fiddle is a good use!!!!
-
@Altis said:
Deluxe Explorer helped me fully restore a small guitar and change the strings on a normal acoustic. The small pliers are perfect for the fine tasks of feeding and pulling strings, as well as cutting them.
"Deluxe Explorer"? I built an Explorer with pliers also. Care to share a picture of yours?
Here's mine...

-
@SteveP said:
"Deluxe Explorer"? I built an Explorer with pliers also. Care to share a picture of yours?Here's mine...
I somehow wrote Deluxe Explorer instead of Deluxe Tinker

The only thing keeping me from making a Deluxe Explorer is having the CyberTool M, which is rather similar... the mag glass is nice though, but then I could carry the SwissChamp...

-
@Altis said:
I somehow wrote Deluxe Explorer instead of Deluxe Tinker

The only thing keeping me from making a Deluxe Explorer is having the CyberTool M, which is rather similar... the mag glass is nice though, but then I could carry the SwissChamp...

I've thought about a CyberTool, but am happy with a SAK with an inline Phillips driver with a hex bit coupler that slides over it.
I alternate between the Deluxe Explorer and a Swiss Champ, depending on what I think I'll need that day. The DE takes care of most of what I need.
-
It’s more on what I did for my SAK today.
I repaired a hex coupler whose magnet fell off after dropping it on a tiled floor ONCE. The magnet flew off with the 1/4 hex bit inside it.
It was a pain to put back a strong magnet.
What’s so important with this coupler? It has a thinner hole which matches the width of the inline drivers of the Explorer, Herc, Spirit and that Wenger SAK with compass. Yes, there’s a bit of wiggle room, but same goes with the 1/4 hex bit. It will not fit a Swiss Tool philips, Rebar, MP600, or Roxon Storm. This allows me to load up on hex and T bits which SAKs don’t have (except those with Cybertool attachments).


-
@Zephon said:
What’s so important with this coupler? It has a thinner hole which matches the width of the inline drivers of the Explorer, Herc, Spirit and that Wenger SAK with compass. Yes, there’s a bit of wiggle room, but same goes with the 1/4 hex bit. It will not fit a Swiss Tool philips, Rebar, MP600, or Roxon Storm. This allows me to load up on hex and T bits which SAKs don’t have (except those with Cybertool attachments).Zephron, it looks like you have the same hex bit coupler that I have. I created a shim from a flexible magnet (the thick ones they stick on the backs of business cards) and used double-sided tape to stick in on the inside of the coupler. Nice tight fit now. Get yourself a 1/4" hex socket adapter and you can use sockets with it, too.
@Kraken said:
@SteveP, what kind of hex bit coupler do you use? I like the idea of using it with the inline Philips driver on my Explorer and Swiss Champ.Kraken, I got my first one with a Winchester multi-tool that came with the coupler and a set of hex bits. I got a second one with a brandless version of the Winchester for about half the price on eBay.
Then I scored pay dirt and found just the coupler and bit set on AliExpress.com for less than $3! Here's a link:
https://www.aliexpress.com/item/4000244018257.htmlAnd here's a thread I started a while back with some other ideas about adding hex bit capability to a SAK:
/topic/87335 -
@SteveP said:
Kraken, I got my first one with a Winchester multi-tool that came with the coupler and a set of hex bits. I got a second one with a brandless version of the Winchester for about half the price on eBay.Then I scored pay dirt and found just the coupler and bit set on AliExpress.com for less than $3! Here's a link:
https://www.aliexpress.com/item/4000244018257.htmlAnd here's a thread I started a while back with some other ideas about adding hex bit capability to a SAK:
/topic/87335Thanks for the links SteveP!
-
Used the saw on my Trekker to prune a mesquite tree next to the sidewalk that’s on my morning walk route. Made short work of it, that thing is effective :)
-
While the Mrs went out on her morning walk and I had to take the furball out to do his duties in the backyard I cut a few little flowers for her using the sak,,
Now let’s see if she notices it in the window.. lol
JR
-
@Echotech said:
Yes they do Tony, surprisingly well for something so small. Best to watch the video on their site for the technique as it’d be easy to break.The Firefly shown I’ve found better than the Fireant which fits in the corkscrew but the Fireant comes with tinder that also works well. It does work I should add but a bit fiddly.
You can get the tinder separately on the Tortoise Gear website so would recommend Firefly plus tinder and then you get to keep the mini driver, although do lose the toothpick, so suppose depends which is more important to you

I agree. The Firefly is easier to use and seems to make mor sparks in my experience. One thing not in the video but I saw in another post or video, I can’t remember where or I’d link it, is that you can use the wire stripper on the bottle opener/screwdriver. I’ve tried it and it works well.
Sent from my iPad using Tapatalk
-
SAK scissors are the best :)
Trusty Climber
Patched up some fly screens on the front door, seems to have worked well enough but poorly designed product.
It comes in 3 layers, the fly screen itself, an adhesive layer and backing. Every time I tried to peel off the backing the fly screen came away without the adhesive. Easily solved by having a section of backing without adhesive and screen, took forever :ahhh

-
@gadgetman7 said:
I agree. The Firefly is easier to use and seems to make mor sparks in my experience. One thing not in the video but I saw in another post or video, I can’t remember where or I’d link it, is that you can use the wire stripper on the bottle opener/screwdriver. I’ve tried it and it works well.Sent from my iPad using Tapatalk
...thanks. That’s how I set up my Camper.
-
@Echotech said:
SAK scissors are the best :)
Trusty Climber
Patched up some fly screens on the front door, seems to have worked well enough but poorly designed product.
It comes in 3 layers, the fly screen itself, an adhesive layer and backing. Every time I tried to peel off the backing the fly screen came away without the adhesive. Easily solved by having a section of backing without adhesive and screen, took forever :ahhh

Yup, you don’t have to tell me, those scissors do the job, I did the same thing on my screens a few months back on two windows just to patch up two holes, only thing is I just placed one layer cause it was temporary, now I have two freaking rolls of screen along with the rubber tube and need to work on like 3windows,,
JR -
@Echotech said:
SAK scissors are the best :)
Trusty Climber
Patched up some fly screens on the front door, seems to have worked well enough but poorly designed product.
It comes in 3 layers, the fly screen itself, an adhesive layer and backing. Every time I tried to peel off the backing the fly screen came away without the adhesive. Easily solved by having a section of backing without adhesive and screen, took forever :ahhh

Gettin' it done!! Great use!
-
Just needed the FarmerX, I had to install a window a/c unit, so I needed the can opener for a few screws then the scissors to cut some foam, but of course the blade to cut the straps and tape to open the box, duh..
JR -
@MadPlumbarian said:
While the Mrs went out on her morning walk and I had to take the furball out to do his duties in the backyard I cut a few little flowers for her using the sak,,
Now let’s see if she notices it in the window.. lol
JRVery Nice

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

