What did you use your Sak on today?
-
Used the saw on my Trekker to prune a mesquite tree next to the sidewalk that’s on my morning walk route. Made short work of it, that thing is effective :)
-
While the Mrs went out on her morning walk and I had to take the furball out to do his duties in the backyard I cut a few little flowers for her using the sak,,
Now let’s see if she notices it in the window.. lol
JR
-
@Echotech said:
Yes they do Tony, surprisingly well for something so small. Best to watch the video on their site for the technique as it’d be easy to break.The Firefly shown I’ve found better than the Fireant which fits in the corkscrew but the Fireant comes with tinder that also works well. It does work I should add but a bit fiddly.
You can get the tinder separately on the Tortoise Gear website so would recommend Firefly plus tinder and then you get to keep the mini driver, although do lose the toothpick, so suppose depends which is more important to you

I agree. The Firefly is easier to use and seems to make mor sparks in my experience. One thing not in the video but I saw in another post or video, I can’t remember where or I’d link it, is that you can use the wire stripper on the bottle opener/screwdriver. I’ve tried it and it works well.
Sent from my iPad using Tapatalk
-
SAK scissors are the best :)
Trusty Climber
Patched up some fly screens on the front door, seems to have worked well enough but poorly designed product.
It comes in 3 layers, the fly screen itself, an adhesive layer and backing. Every time I tried to peel off the backing the fly screen came away without the adhesive. Easily solved by having a section of backing without adhesive and screen, took forever :ahhh

-
@gadgetman7 said:
I agree. The Firefly is easier to use and seems to make mor sparks in my experience. One thing not in the video but I saw in another post or video, I can’t remember where or I’d link it, is that you can use the wire stripper on the bottle opener/screwdriver. I’ve tried it and it works well.Sent from my iPad using Tapatalk
...thanks. That’s how I set up my Camper.
-
@Echotech said:
SAK scissors are the best :)
Trusty Climber
Patched up some fly screens on the front door, seems to have worked well enough but poorly designed product.
It comes in 3 layers, the fly screen itself, an adhesive layer and backing. Every time I tried to peel off the backing the fly screen came away without the adhesive. Easily solved by having a section of backing without adhesive and screen, took forever :ahhh

Yup, you don’t have to tell me, those scissors do the job, I did the same thing on my screens a few months back on two windows just to patch up two holes, only thing is I just placed one layer cause it was temporary, now I have two freaking rolls of screen along with the rubber tube and need to work on like 3windows,,
JR -
@Echotech said:
SAK scissors are the best :)
Trusty Climber
Patched up some fly screens on the front door, seems to have worked well enough but poorly designed product.
It comes in 3 layers, the fly screen itself, an adhesive layer and backing. Every time I tried to peel off the backing the fly screen came away without the adhesive. Easily solved by having a section of backing without adhesive and screen, took forever :ahhh

Gettin' it done!! Great use!
-
Just needed the FarmerX, I had to install a window a/c unit, so I needed the can opener for a few screws then the scissors to cut some foam, but of course the blade to cut the straps and tape to open the box, duh..
JR -
@MadPlumbarian said:
While the Mrs went out on her morning walk and I had to take the furball out to do his duties in the backyard I cut a few little flowers for her using the sak,,
Now let’s see if she notices it in the window.. lol
JRVery Nice

-
Used the pen of the Manager yesterday at the grocery store to cross off my list. Had forgoten to bring my EDC pen, so the Manager stepped up

-
@MadPlumbarian said:
Yup, you don’t have to tell me, those scissors do the job, I did the same thing on my screens a few months back on two windows just to patch up two holes, only thing is I just placed one layer cause it was temporary, now I have two freaking rolls of screen along with the rubber tube and need to work on like 3windows,,
JR:ahhh annoying
-
What did I use on my SAK today….
Gave this ol’ Wenger a good soak and oiled up for the October challenge.
Then the blade needed a bit of touchup as well.
Here’s just a quick pick of the “after”. I also used the pen-like sharpening tool on it.

-
Used my SwissChamp's Nail File to file callus off my fingers [emoji1303]
-
Lunch today,,,,

-
So yesterday I sharpened a few pencils. I did not do it with a SAK but with a Rough rider pen knife. I've gotten pretty darn good at free hand, pocket knife pencil sharpening and I give them a really nice point. And though I won't put the pencils in the holder with the point down so I won't damage it and have it nice and fresh when I need it, I just have to be careful around it. Of coarse I forgot about it so today I smashed the backside of my palm right into that fine tip. And it pierced well. Of coarse, a decent piece of graphite was left in the wound. Tried to squeeze it out but it wasn't going to give in that easy. So here comes SAK usage - first I grabbed just a random one from the drawer to use the tweezers. But they weren't doing it. So I grabbed the Handyman to use it's pliers. Now they are too small to be decent pliers but damn if they aren't great tweezers. Used the scissors to take some of the arm hair out of the way, then the small knife to make a small cut (or two because the first one wasn't in the right place :D). Took the pin out to dig around a bit and the pliers to do the actual job. Afterwards used the Explorer's magnifying glass to see if I've gotten it all out. Used some 95% alcohol to clean the wound and thought it would be great to clean the tools on my Victorinox with it. Did you know that strong enough alcohol starts to dissolve the plastic scales on a SAK ? It was a surprise for me for sure ! Anyway, it was one of those days when I didn't have to wonder what to use my toys on

-
Well, I don’t have a pic but I’ve been doing some work on the house and I’m drywalling a 1/2 bath in the basement for the kid, and I needed to cut three holes, two for a pipe and one for a switch box, and I must say the FarmerX’s saw cuts like butter! Right through 1/2”!
JR -
Well couldn’t use the FarmerX this time, but the Mrs and I were taking the trash out and she ended up getting a splinter/sliver, and of course any one knows any sak’s tweezers are the absolute best to get them out! Only problem was this one didn’t want to come out so I had the Mrs go get the Champion Plus so I could use the pin to work it lose and get it out!
Of course let’s not forget about me, cause as she got the splinter she dropped the wood in which scratched me all down the back of the leg,,
JR -
I started a new job on Monday as a wiring tech for a company that manufactures power distribution switch gear. Somehow in the last 12 years since I've done electrical work they've figured out how to produce blueprints so small that you just can't read the wire numbers,,,, I just struggled all day. It wasn't just me,, even the young techs that didn't wear glasses were struggling, and I noticed that some had a magnifying glass in their toolbox.
Yesterday evening I ordered a nice magnifying glass to use at work. To get by while I wait for it to be delivered, this morning I had a plan,,, I packed the Champion in on my hip. That little magnifying glass is sure powerful!! Would have liked to capture an action pic, but cell phones are strongly prohibited on the floor. The SAK magnifier isn't exactly the perfect tool for the job,,, but it sure was helpful today.
I was kind of surprised just how light the Champion was to carry. A few times I even felt the urge to reach around and check and insure it was still in the sheath.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

