Daredevil Challenge 2021
-
Day 22
Today I used the Phillips driver to tighten the belt clip to the ESEE Izula-II sheath. Not as good as Victorinox or Leatherman drivers, but it did the job. It sufficed. -
<u>DAY 22</u>
A work day today and I managed to get away "a bit" early as I'm doing them a favour tomorrow ;)
I had to adjust the scales at work today and needed something to test that I'd zeroed it correctly

What better than the current challenge participant (not as hefty as it's bulk suggests)
I, on the other hand...


-
**Day 22
**
Had to change the battery in the exterior garage door opener. (Not fun finding that you can't open the door from outside.)Large screwdriver popped open the battery compartment and scissors cut the plastic off the new battery.


-
Day 22 of 30
No uses today
but that is normal for me on a Sunday
I waited a bit later in the day to see if I was actually gonna get to use it..... but nope :D
-
No uses today
but that is normal for me on a Sunday
I waited a bit later in the day to see if I was actually gonna get to use it..... but nope :D
Poncho65, did you see that the Suspension NXT got voted Best Budget Multitool by Field & Stream?
https://www.fieldandstream.com/outdoor-gear/best-multitool/Echotech, no mention of the Hammerhead, I'm sorry.
-
Day 22
The minimaster helped open a box and a beer, but just a glamour shot for pic.

-
Day 22: I had to put together a lawnmower. The job entailed my Cold Steel Voyager (Made in Japan, early model) and close to 80-year-old but new to me socket set comprised of SK of no less than three! different generations of sockets, and a late '50s 45170 ratchet; Speed Master by Montgomery Ward, early Craftsman 1/4 ratchet with quick release, and Plomb (Proto) from the late 1940s.

And the socket set:

I want to buy a modern Voyager, as this one's a little banged up (sharp, but really badly damaged serrations that I could not resharpen; and poorly reprofiled) as it was "the cheap one I bought to see if I liked it". But, I prefer the handle shape of the older model, and it looks like the ergomics and balance of the current Voyager L are much different. I love the balance and ergonomics of this one. And mine, I believe is San Mai, not AUS-10.
Any experience here with newer Voyagers? Other models in the category of similar price and Taiwan or Japan made that I should try?
-
@SteveP said:
Poncho65, did you see that the Suspension NXT got voted Best Budget Multitool by Field & Stream?
https://www.fieldandstream.com/outdoor-gear/best-multitool/Echotech, no mention of the Hammerhead, I'm sorry.
No Hammerhead? Surely not :ahhh obviously can’t be trusted

-
Day 23
Back at work from home, week 10?
all rolling into one :ahhhHammerhead amongst the jasmine, the fragrance is superb…the jasmine smells good too


-
Day 23

-
The TripSaver and a new addition to my EDC:

-
@Humayd A R Mahomedy said:
sounds like he's improving
Day 22
<a href="https://flic.kr/p/2miCbNo" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51395268698_76f4f67039.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20210822_181205 by Humayd a r Mahomedy, on Flickr
i really dig the main blade,it's similar to the alox blades,there's just something about it. probably the SAK connection :D
Thank you guys! Really do appreciate the good wishes!@Fireman said:
Daredevil Day 22: No use today, and I'm counting the days until I can carry a SAK.
Same here.

@Alan K. said:
Day 22
Today I used the Phillips driver to tighten the belt clip to the ESEE Izula-II sheath. Not as good as Victorinox or Leatherman drivers, but it did the job. It sufficed.Alan, I think you too do like the smaller fixed blade and have a Brisa Necker somewhere. I would also strongly recommend to take a look at the Brisa Bobtail, which is a massive improvement over the necker or the Izula I/II.
A work day today and I managed to get away "a bit" early as I'm doing them a favour tomorrow ;)
I had to adjust the scales at work today and needed something to test that I'd zeroed it correctly

What better than the current challenge participant (not as hefty as it's bulk suggests)
I, on the other hand...

Don't worry it's the clothing...that's what I always tell Mrs. :D
@SteveP said:
**Day 22
**
Had to change the battery in the exterior garage door opener. (Not fun finding that you can't open the door from outside.)Large screwdriver popped open the battery compartment and scissors cut the plastic off the new battery.
At least it's summer time, I would hate to fidget with that in deep winter.
@Sos24 said:
Day 22
The minimaster helped open a box and a beer, but just a glamour shot for pic.

Nice shot!
@Echotech said:
No Hammerhead? Surely not :ahhh obviously can’t be trusted
I would have thought the title may go to LM wingman or sidekick, but their prices have increased significantly over the years.
-
@comis said:
Thanks for asking! Doing a little bit better, he still have diarrhea(which may continue for another week) but food/drink seem to sit better in his stomach and feeling a little bit more animated than previously.Doctor told us to not feed him too much food and best keep him slightly hungry, and I could have sworn it's my first time hearing 'donut' and 'chocolate' in sleep talk.
Hope he's get well soon Comis!
Enviado de meu Moto Z2 Play usando o Tapatalk
-
@ReamerPunch said:
Day 23
Never seen this one in the past, is it sour?
@Adam5 said:
The TripSaver and a new addition to my EDC:
Always love Knipex offerings, and had been thinking paring it with a SAK as an EDC for the longest time.
@Hevy (CT-782) said:
Hope he's get well soon Comis!Enviado de meu Moto Z2 Play usando o Tapatalk
Thanks Hevy! He is, and we will be doing another lab test tomorrow, hopefully he fought off the bug already.

-
@ReamerPunch said:
Day 22
Nice see the Flik again with all of it's quirkness!
Man... I had one for ten years. It was my first and only MT, until It was stolen.
(I never had to open a can with it)
The tool in fact have many shortcomings...
Main blade, small and almost useless tools...
The most used: pliers and scissors.Enviado de meu Moto Z2 Play usando o Tapatalk
-
<u>Day 23</u>

Wetols helped make a drip coffee for the morning, food and drink use gonna be my favorite tool use.
-
Glamour shot

Those blades look really wide 
@cody6268 said:
Day 22: I had to put together a lawnmower. The job entailed my Cold Steel Voyager (Made in Japan, early model) and close to 80-year-old but new to me socket set comprised of SK of no less than three! different generations of sockets, and a late '50s 45170 ratchet; Speed Master by Montgomery Ward, early Craftsman 1/4 ratchet with quick release, and Plomb (Proto) from the late 1940s.
And the socket set:

I want to buy a modern Voyager, as this one's a little banged up (sharp, but really badly damaged serrations that I could not resharpen; and poorly reprofiled) as it was "the cheap one I bought to see if I liked it". But, I prefer the handle shape of the older model, and it looks like the ergomics and balance of the current Voyager L are much different. I love the balance and ergonomics of this one. And mine, I believe is San Mai, not AUS-10.
Any experience here with newer Voyagers? Other models in the category of similar price and Taiwan or Japan made that I should try?
Nice pic'

@Sos24 said:
Day 22
The minimaster helped open a box and a beer, but just a glamour shot for pic.

Cool shot Sos

No uses today
but that is normal for me on a Sunday
I waited a bit later in the day to see if I was actually gonna get to use it..... but nope :D
Day of rest and all that

@Fireman said:
Daredevil Day 22: No use today, and I'm counting the days until I can carry a SAK.
I think we're awl counting the days ::) Is that your hound? -
<u>DAY 23</u>
Another work day today and I was required to use a fancy bit of Gucci kit (which I didn't break
)I rarely have an opportunity to use the cutting hook but it sliced right through the seal like a...cutting hook through butter



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
