ST 300 owners club
-
@dmattaponi said:
Picture of my Supertool 300 which arrived today. Nice tool overall. Especially like the longer tools and the nice flat drivers.One question…fit and finish is nice overall, but when the tool is closed the handles are noticeably loose, to the point of clanking together. Is this the norm on the Supertool 300? All of the tools stay seated nicely.

You can see the amount of movement by the difference in the space between the two handles in the pictures below. There is no resistance at all in the space of this movement. The handles just bounce against each other freely.


Edit to add…I went ahead a ordered a replacement. I’ll compare the two and keep the better of the two. Would still like to hear from some of you if this is common, so I know what to expect. Thanks for any feedback.
Hi dmattaponi, I have two 300's, a standard model and a BO, both bought new and both have some play when closed (like you describe). The BO is about the same as yours, and the SS model less (about 2mm play). This won't change with use, as it's the plier's pivot that is giving this movement together with some play around the handle pivots.I find the play on the handle pivots is slightly more on the BO which explains why it has a little more play when closed.
You may be lucky with #2, but I think it's a bit of a factory tolerance issue, so probably something that LM would consider normal.


-
I guess it has been so long since I have had a new one that I must have forgotten how they were or the older ones had a better tolerance

-
Update…received my replacement Supertool 300 today. It is exactly what a I would have expected. Everything is nicely fit and finished, and in good working order. When opening, it’s not as tight as my other tools, but is not at all loose and rattling. It also confirms for me that my first example was very loose, downright floppy in both the handles or pliers head. With the original, even when closed the handles were loose and would click against each other at both the top and bottom. As I said the replacement is exactly what I was expecting the first time around, and I think the Supertool 300 is a VERY nice tool. It definitely gives the impression of being a toolbox full of nice tools in the palm of your hand. I wouldn’t EDC it, but I definitely like having it around.
Both tools have dates stamps of 10/19 and 1/20 in the handles, so they were made around the same time and have been sitting in a warehouse for a little while. I did not buy directly from Leatherman.
Thanks again, Poncho for the feedback. I do appreciate it.
Sent from my iPad using Tapatalk
-
Glad to hear that this one is better

-
Nice pics Poncho

-
Thanks Max

-
Joining this club tomorrow with a BO version.....very excited
-
Congrats
the BO version is very nice 8) 
-
@dmattaponi said:
Update…received my replacement Supertool 300 today. It is exactly what a I would have expected. Everything is nicely fit and finished, and in good working order. When opening, it’s not as tight as my other tools, but is not at all loose and rattling. It also confirms for me that my first example was very loose, downright floppy in both the handles or pliers head. With the original, even when closed the handles were loose and would click against each other at both the top and bottom. As I said the replacement is exactly what I was expecting the first time around, and I think the Supertool 300 is a VERY nice tool. It definitely gives the impression of being a toolbox full of nice tools in the palm of your hand. I wouldn’t EDC it, but I definitely like having it around.Both tools have dates stamps of 10/19 and 1/20 in the handles, so they were made around the same time and have been sitting in a warehouse for a little while. I did not buy directly from Leatherman.
Thanks again, Poncho for the feedback. I do appreciate it.
Sent from my iPad using Tapatalk
Glad to hear that you got it sorted out in the end

I often pocket carry my ST300, and now that it is a little more broken in, it will flop open in my pocket. I intentionally keep the lanyard ring sticking up about 2mm when I close the tool. This way the lanyard ring presses between the serrated blade and bottle opener, and keeps the tool closed

-
@AndyS said:
Glad to hear that you got it sorted out in the end
I often pocket carry my ST300, and now that it is a little more broken in, it will flop open in my pocket. I intentionally keep the lanyard ring sticking up about 2mm when I close the tool. This way the lanyard ring presses between the serrated blade and bottle opener, and keeps the tool closed

Thanks for the comments. I’m wouldn’t be surprised if mine does the same when it loosens up a bit, because it’s not very tight even now.
Sent from my iPad using Tapatalk
-
Great pics Poncho!
-
-
The rest finally uploaded to Imgur




-
Looking good!
-
Great tool, great picture,...!

(Wait, where have I seen or said this before!?
)
Anywho, good ones, Adam!!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








