Daredevil Challenge 2021
-
@Alan K. said:
Day 25
It's time for The Castaway portion of the challenge whereby I determine if the tool I'm using could prevent me from starving or dying of thirst by opening a coconut if I found myself stranded on an island like Tom Hanks in the movie Castaway.First I used the knife to top the coconut and cut the shell into sections so I could pull them off. The knife blade on the MP600 was a little awkward to use. I found myself pushing the lock release with my thumb every time I'd bear down hard on the knife, but the design of the MP600 means that there was no way for the knife to close on my hand because if it closed it would have hit the other handle and not my hand. The partial serrations did work very well cutting through the coconut fibers.
Second, lacking an awl, I used the small flat driver to bore holes into a couple of the coconut's eyes. The coconut water did not want to pour freely from the small holes but I was able to suck it out. Coconut water is loaded with electrolytes and it was very refreshing.
Third step was to crack the coconut in half to get to the meat inside the shell. I used the closed MP600 to tap the coconut around its perimeter until it cracked. Success! You won't starve or die of thirst with the MP600 to open your coconuts.
Great job!
I really don't get why Gerber abandoned awls on the MP600 entirely, given most of their competitors have awls on most of the catalog. You'll see awls on a small handful of odd (and hard to find) late '90s and early 2000s Multilocks, but never MP600s. The MP600 M4 Sight Tool carbon scraper is not an awl. Albeit, I have personally used the carbon scraper as one (as my main reason in getting an MP600 ST was the proper length Phillips). I had, at one point, almost bought a beat up Scout to harvest the awl from, but the seller wanted $25, which I felt was too much for a tool in poor condition with a damaged blade and file.
-
@Alan K. said:
Day 25
It's time for The Castaway portion of the challenge whereby I determine if the tool I'm using could prevent me from starving or dying of thirst by opening a coconut if I found myself stranded on an island like Tom Hanks in the movie Castaway.First I used the knife to top the coconut and cut the shell into sections so I could pull them off. The knife blade on the MP600 was a little awkward to use. I found myself pushing the lock release with my thumb every time I'd bear down hard on the knife, but the design of the MP600 means that there was no way for the knife to close on my hand because if it closed it would have hit the other handle and not my hand. The partial serrations did work very well cutting through the coconut fibers.
Second, lacking an awl, I used the small flat driver to bore holes into a couple of the coconut's eyes. The coconut water did not want to pour freely from the small holes but I was able to suck it out. Coconut water is loaded with electrolytes and it was very refreshing.
Third step was to crack the coconut in half to get to the meat inside the shell. I used the closed MP600 to tap the coconut around its perimeter until it cracked. Success! You won't starve or die of thirst with the MP600 to open your coconuts.
awlways enjoy seeing this test 
-
Day 26
Opened some porky bites for Coco…when pouring them into a better container managed to drop a load on the floor …mad scramble as 40kg Ridgeback thought all of her Christmas’s had come at once :ahhh


-
You sure those are doggie treats? They look pretty good to me, but maybe I just need a snack.
-
Day 25
Package opening. Inside was a new-to-me Marlboro Outdoorsman. It needs a good cleaning.
I'd been looking for a 91mm Woodsman (Explorer + wood saw), but no luck finding one. The Outdoorsman is the same, just adding the fish scaler (and I like having the rulers on the fish scaler). Close enough!
I think I'll put some Plus scales on it. Just need to decide on the color. Might make this my first yellow SAK. Stayglow yellow would be cool, but I haven't seen those scales for sale anywhere.

-
-
thank you Surge
Day 25<a href="https://flic.kr/p/2mjohhn" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51403872069_68487fd83c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20210826_073454 by Humayd a r Mahomedy, on Flickr
another glamour shot -
Day 26
More cravings. Why though? They're not even that tasty.


-
-
Daredevil Day 26: The Swiss+Tech showed its superiority to Victorinox today. I was replacing scales on a Deluxe Tinker, and I normally use a small SAK blade top pop off scales. Not today. It seemed that a stiffer blade was called for, and Swiss+Tech did the job in no time. I'd swear I heard it say, "Take that, you pompous Vic!


-
@Alan K. said:
[quote author=comis
Small world! And I am still glad the little one haven't figured out what bacon is made out of...
Peppa(d) Pig? I think I will refer to bacon by this new name in the future.
>:D 
Son, see this? If you still haven't forgiven me, I told you I didn't roast your pig on purpose, everyone else is doing it too!

@SurgeUk said:
Thankfully my kids are awl grown up and now have to deal with this (with their kids ;) )If it ain't broke you can't fix it
What's life without a little glamour
Nice shot
Used the same stuff to bring a bit of life back to a tin of polish (for my parade boots) 
I have watched enough of it that my mind will just completely zone out whenever the Peppa's music is on, it's almost therapeutic.

@Alan K. said:
Day 25
It's time for The Castaway portion of the challenge whereby I determine if the tool I'm using could prevent me from starving or dying of thirst by opening a coconut if I found myself stranded on an island like Tom Hanks in the movie Castaway.First I used the knife to top the coconut and cut the shell into sections so I could pull them off. The knife blade on the MP600 was a little awkward to use. I found myself pushing the lock release with my thumb every time I'd bear down hard on the knife, but the design of the MP600 means that there was no way for the knife to close on my hand because if it closed it would have hit the other handle and not my hand. The partial serrations did work very well cutting through the coconut fibers.
Second, lacking an awl, I used the small flat driver to bore holes into a couple of the coconut's eyes. The coconut water did not want to pour freely from the small holes but I was able to suck it out. Coconut water is loaded with electrolytes and it was very refreshing.
Third step was to crack the coconut in half to get to the meat inside the shell. I used the closed MP600 to tap the coconut around its perimeter until it cracked. Success! You won't starve or die of thirst with the MP600 to open your coconuts.
Great use and thank you for doing this challenge within challenge
, I haven't got the chance to get a young coconut just yet, but if I manage to get my hands on one, I too will do one with the Wetols before this is over.Great to see you pull the trigger and get one, pretty!

-
Opened some porky bites for Coco…when pouring them into a better container managed to drop a load on the floor …mad scramble as 40kg Ridgeback thought all of her Christmas’s had come at once :ahhh



@Alan K. said:
You sure those are doggie treats? They look pretty good to me, but maybe I just need a snack.Kinda reminds me of Lethal Weapon I, I could have sworn Rick never have a solo scene without eating his dog treat non-stop.
Package opening. Inside was a new-to-me Marlboro Outdoorsman. It needs a good cleaning.
I'd been looking for a 91mm Woodsman (Explorer + wood saw), but no luck finding one. The Outdoorsman is the same, just adding the fish scaler (and I like having the rulers on the fish scaler). Close enough!
I think I'll put some Plus scales on it. Just need to decide on the color. Might make this my first yellow SAK. Stayglow yellow would be cool, but I haven't seen those scales for sale anywhere.
I think there is a few sellers on Ebay that usually will have them, and the prices are ok too.
-
<u>Day 26</u>

Used Wetols to liberate a few new knives and parts.
The new black micarta Case is pretty good, the satin finish on the blades hide any imperfections/blade rub quite well, and the overall fit and finish is decent. The Pocket worn is the 20th anniversary rendition, but the F&F is all over the place, gaps, poor rivets, play, proud spring when blades are opened...as if it is trying to reminds me the tango relationship with Case, one step forward, two steps back.
The flytanium Ti scales on PM2 fits like a glove. I always wanted to try them, and now I know what the rave is all about. It does turn the PM2 into something completely different, and I like it.
-
Day 26
<a href="https://flic.kr/p/2mjoJmr" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51403959769_f36005d509.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20210826_082515 by Humayd a r Mahomedy, on Flickr
i've been planning on re-sharpening the chisel for some time,and today i finally put a descent edge on it,using a coarse lansky stone,then a medium Lansky stone. -
Day 26 of 30
Been driving around and sitting some today and thought now would be a great time for a pic :D

-

Wetols harvested some herbs for making a steak meal today.
We want a pic' of the steak

That is lovely

Opened a new utility knife for my electronics toolkit (I always keep 1X electricians knife and 1X utility knife in my larger kits)
The Stanley 99E is a disappointment, when compared to my vintage 10-099s. I don't know if the "E" stands for "Economy" or not, but it seems very poorly made compared to any of the several around here (some older than the 1970s, others not 10 years old). The leaf spring that locks the blade in place is what worries me. It is much softer than that on any of my others. I have an (imported, sadly) WorkPro in my main toolbox that cost $2 less, but is a thousand times better. I prefer folding for quick blade changes and a safer lock, but I like the 99's ergonomics. The plastic lock in my hand-me-down 10-049 recently broke due to age (it's an original chrome-plated model); but I"m replacing it with a Christy. I usually sharpened the blade instead of replacing it, and the Christy has no plastic whatsoever and is both smaller and slimmer. It will also likely replace this Stanley, as I can lock the blade in several positions on the Christy as well.

Cut tape:
The shower door in the master bathroom won't stay closed. It is a combination of a warped frame and the magnetic strip going bad. I usually use a short piece of clear Gorilla Tape along the top when I'm in there to keep the door shut and water out of the floor, while still being easy to open. I need to get around to measuring that strip and buying and installing a new one. The problem is that you have to take it apart to do so, that's why ti's not been done.

Go on, you know you want to use the Swiza to repair the shower...

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


:o 