Daredevil Challenge 2021
-
-
@Alan K. said:
Day 25
It's time for The Castaway portion of the challenge whereby I determine if the tool I'm using could prevent me from starving or dying of thirst by opening a coconut if I found myself stranded on an island like Tom Hanks in the movie Castaway.First I used the knife to top the coconut and cut the shell into sections so I could pull them off. The knife blade on the MP600 was a little awkward to use. I found myself pushing the lock release with my thumb every time I'd bear down hard on the knife, but the design of the MP600 means that there was no way for the knife to close on my hand because if it closed it would have hit the other handle and not my hand. The partial serrations did work very well cutting through the coconut fibers.
Second, lacking an awl, I used the small flat driver to bore holes into a couple of the coconut's eyes. The coconut water did not want to pour freely from the small holes but I was able to suck it out. Coconut water is loaded with electrolytes and it was very refreshing.
Third step was to crack the coconut in half to get to the meat inside the shell. I used the closed MP600 to tap the coconut around its perimeter until it cracked. Success! You won't starve or die of thirst with the MP600 to open your coconuts.
Maybe I should try that with my Pro-Scout

-
@comis said:
Son, see this? If you still haven't forgiven me, I told you I didn't roast your pig on purpose, everyone else is doing it too!
I have watched enough of it that my mind will just completely zone out whenever the Peppa's music is on, it's almost therapeutic.

Great use and thank you for doing this challenge within challenge
, I haven't got the chance to get a young coconut just yet, but if I manage to get my hands on one, I too will do one with the Wetols before this is over.Great to see you pull the trigger and get one, pretty!

And I will say I am glad I did. It just fits my hand beautifully and hits a sweet spot in size between the other knives I have.
-

Used Wetols to liberate a few new knives and parts.
The new black micarta Case is pretty good, the satin finish on the blades hide any imperfections/blade rub quite well, and the overall fit and finish is decent. The Pocket worn is the 20th anniversary rendition, but the F&F is all over the place, gaps, poor rivets, play, proud spring when blades are opened...as if it is trying to reminds me the tango relationship with Case, one step forward, two steps back.
The flytanium Ti scales on PM2 fits like a glove. I always wanted to try them, and now I know what the rave is all about. It does turn the PM2 into something completely different, and I like it.
Sad that a 20th Anniversary knife did not have good quality control. I would expect better, especially on a special edition.
@Humayd A R Mahomedy said:
Day 26<a href="https://flic.kr/p/2mjoJmr" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51403959769_f36005d509.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20210826_082515 by Humayd a r Mahomedy, on Flickr
i've been planning on re-sharpening the chisel for some time,and today i finally put a descent edge on it,using a coarse lansky stone,then a medium Lansky stone.Interesting mld. I love the chisel on the Spirit, but would be interested to know how you end up liking the mod.
Been driving around and sitting some today and thought now would be a great time for a pic :D

Interesting photo. It works
-
@Fireman said:
Daredevil Day 26: The Swiss+Tech showed its superiority to Victorinox today. I was replacing scales on a Deluxe Tinker, and I normally use a small SAK blade top pop off scales. Not today. It seemed that a stiffer blade was called for, and Swiss+Tech did the job in no time. I'd swear I heard it say, "Take that, you pompous Vic!

Out of curiosity did you try warming the scales, by putting the SAK in hot water, before prying. It usually works well for me.
-
Package opening. Inside was a new-to-me Marlboro Outdoorsman. It needs a good cleaning.
I'd been looking for a 91mm Woodsman (Explorer + wood saw), but no luck finding one. The Outdoorsman is the same, just adding the fish scaler (and I like having the rulers on the fish scaler). Close enough!
I think I'll put some Plus scales on it. Just need to decide on the color. Might make this my first yellow SAK. Stayglow yellow would be cool, but I haven't seen those scales for sale anywhere.
Nice

-
<u>DAY 26</u>
Another not appropriate photo taking day (see yesterday)
However, Mrs Surge advised me that hernail varnishwarpaint storage device need attention

-
Day 26
I've been trying all month to find a use for the "Universal Wrench" on the Evolution S557. With the challenge end coming up soon, I decided to try a couple of random things:
-
Bolts holding the license plate to my car: Too big for the jaws of the Universal Wrench.
-
Hex-head screws holding my gutters together: Jaws fit on them, but with the wrench being in the middle of a 5-layer SAK, I couldn't get the Universal Wrench flush enough with the screw head to get any grip on it.
-
Some of the bolts holding the garage door track together: Too big for the Universal Wrench.
So, in summary, I don't know what universe the "Universal Wrench" is made for, but it isn't mine. Leaving it as a large useless piece of metal in the middle of the S557.
If any of you out there have positive experiences with the Wenger Universal Wrench, I'd love to hear about them. Somebody at Wenger must have thought it would be useful or Wenger wouldn't have added it to several SAKs and Victorinox wouldn't have kept it in the Delemont line.
Update on Day 25:
I did almost have an additional use last night...
I got a splinter in my finger and thought the tweezers and the pin would be perfect. But I needed the mag glass from my Deluxe Explorer (Explorer + pliers mod) to see the splinter, so ended up using its tweezers and pin instead. Now if only the S557 had a mag glass instead of the wrench...

-
-
Day 26
More yard work. It never ends. -
I've been trying all month to find a use for the "Universal Wrench" on the Evolution S557. With the challenge end coming up soon, I decided to try a couple of random things:
-
Bolts holding the license plate to my car: Too big for the jaws of the Universal Wrench.
-
Hex-head screws holding my gutters together: Jaws fit on them, but with the wrench being in the middle of a 5-layer SAK, I couldn't get the Universal Wrench flush enough with the screw head to get any grip on it.
-
Some of the bolts holding the garage door track together: Too big for the Universal Wrench.
So, in summary, I don't know what universe the "Universal Wrench" is made for, but it isn't mine. Leaving it as a large useless piece of metal in the middle of the S557.
If any of you out there have positive experiences with the Wenger Universal Wrench, I'd love to hear about them. Somebody at Wenger must have thought it would be useful or Wenger wouldn't have added it to several SAKs and Victorinox wouldn't have kept it in the Delemont line.
Update on Day 25:
I did almost have an additional use last night...
I got a splinter in my finger and thought the tweezers and the pin would be perfect. But I needed the mag glass from my Deluxe Explorer (Explorer + pliers mod) to see the splinter, so ended up using its tweezers and pin instead. Now if only the S557 had a mag glass instead of the wrench...
Placement of a tool does matter. I believe that RP found that the can opener for some MTs were functionally useless due to their placement in the MT. It seems that no one tested the Universal Wrench in real world situations.
-
-
Day 26
Not much use today. I did use the TripSaver to cut a piece of Romex electrical cable, which reminded me of how unsuited the pliers are for that task.

-
Day 26, opening stuff

-
@Adam5 said:
Placement of a tool does matter. I believe that RP found that the can opener for some MTs were functionally useless due to their placement in the MT. It seems that no one tested the Universal Wrench in real world situations.You're so right about placement, Adam.
I'm thinking that two things came into play with location of the wrench in the middle of the SAK:
- I've heard that the wrench is good for bicycle repairs. I don't ride so can't say. Maybe there are a lot of bolts on a bike that aren't flush with the surface they're in?
- Many people complain about the Vic inline Phillips being off center. With the wrench in the center, so is the Wenger inline Phillips.
-
Day 27
More opening of dog food today…as I’ve said before, if there’s one thing this challenge has taught me is I use a knife every day, other tools much less…but still feel happier having them nearby
Have enjoyed the Hammerhead, fine around home which having been in lockdown now for 9 weeks is the only place I’ve been, but couldn’t see me edc’ing it

-
@Adam5 said:
Placement of a tool does matter. I believe that RP found that the can opener for some MTs were functionally useless due to their placement in the MT. It seems that no one tested the Universal Wrench in real world situations.yup. Look at this Grand Harvest K2 for example. The can opener is so far to the right, that it cannot engage on the rim and function.

-
Day 27

-
Day 26
The Minimaster helped to breakdown some boxes. The small driver has a small and narrow enough end that it cuts through packing tape pretty well, saving the blade. Afterward, it did a nice job opening a beer

-
@Echotech said:
Have enjoyed the Hammerhead, fine around home which having been in lockdown now for 9 weeks is the only place I’ve been, but couldn’t see me edc’ing it
I've got to ask - how are you carrying the Hammerhead around? Did it come with a custom belt sheath or something? A tool belt hammer holder? I can't believe you'd keep it in your pocket.
-
@SteveP said:
I've got to ask - how are you carrying the Hammerhead around? Did it come with a custom belt sheath or something? A tool belt hammer holder? I can't believe you'd keep it in your pocket.It comes with its own sheath Steve, can be belt carried vertically or horizontally
For 9 weeks, so since well before the challenge, I’ve been in lockdown.
Apart from a weekly trip to Coles (supermarket) I’ve only left the house to walk Coco, so haven’t actually carried it all :ahhh


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login