Daredevil Challenge 2021
-
I would like to say that I thoroughly enjoyed this challenge. Not so much the MT I carried (though it could have been much worse), but I definitely enjoyed interacting with all of you

Thank you for the pleasurable experience
And now, if Poncho does not mind:

-
I am finally at a computer instead of a phone and can see who has badges and who doesn't
:DBadges awarded to SteveP and Adam5

Congrats to everyone that has the badge
and if you still lack it, just go and request it and we will get to you as soon as we can 
-
@comis said:
Congrats on finishing!
I think your choice of tool is rather interesting, of all those "hammer tools" I often see on Amazon and elsewhere, not one in a million would I think I would get one and let alone carry it. Thank you for stepping up to the plate and show us it is 'doable'.

Thanks comis

Being stuck at home for almost 10 weeks now made it a bit easier, if I’d have had to properly EDC it think my reaction would have been different.
Glad a gave it a go though, it’s just been in a box since a mate gave it to me.
Like you I’ve always thought of these off brand hammer tools as junk really and while not great, was much better than I thought it’d be, hence me not giving a proper critique.
We all know they’re a bit smurf but for what it is, it’s actually not bad, the hammer itself is good and strikes me
as better than the type that incorporate pliers too… double the unusable tools!
-
**Day 30 - I'm done!
**
The S557 waving out the end of the challenge.So how did it do for the month?
Well, it did nearly everything I asked it to do. I don't hate it. It won't be relegated to the Drawer of Shame. But...
Pros:
- I like the 85mm size vs. the larger 91mm SAKs.
- I found the contoured scales comfortable.
- I liked having the nail file in a larger SAK. (Though I did miss having the smaller second blade.)
- I did appreciate the locking knife blade a few times as a safety feature. Especially as the blade on this new SAK is plenty sharp.
Cons:
- The blade lock release lever was always getting caught on my pocket or in my belt pouch. Why Vic would keep something sharp that sticks out that far is beyond me.
- The finicky scissors that struggle to cut anything pliable. I use scissors regularly so not knowing if the Wenger-designed ones would cut the item was pretty frustrating.
- The useless "Universal" wrench. I couldn't come up with a use for it the whole month, not with it stuck in the middle of a five-layer SAK so there's no way to get a grip on anything remotely flush with the surface. I'll stick with my Swiss+Tech Micro-Slim or Leatherman By the Numbers 3 flat wrenches in my pocket EDC kit.
- The fiddly pliers. Seems like everytime I opened the pliers the slip joint slipped to the wide position (or just part way), unless I opened them very carefully. I could rarely just open and use them.
- The very tight and very short inline Phillips driver. Yes, it works, but it's hard to use.
- I don't understand why Victorinox didn't give the bottle opener and inline Phillips the 90 degree stop like the mainline Vic-branded SAKs, unless it has something to do with the push-locking feature.
- No magnifying glass. I use the ones on my mainline Vic SAKs regularly so missed having that on me. I could break apart the S557 and replace the wrench with a 91mm mag glass, but I'd still be stuck with the finicky scissors, fiddly pliers, short inline Phillips, and in-the-way blade lock release lever.
For a concept, the S557 is great. But for execution, I'm not so sure.
Several of you have said that your challenge tool was OK, but not in comparison to what you usually use. I'm in the same boat. If I didn't know there were better choices out there, I might think the S557 a great SAK. But the tools (scissors, pliers, inline Phillips) are executed far better in mainline Vic SAKs or just don't work at all as part of a thick SAK (wrench).
For me, the S557's main competition is my Swiss Champ or my Deluxe Explorer mod (Explorer + pliers), and it just doesn't match up to them. I'll be going back to them, with a useful small wrench in my pocket.
Thank you, Comis, for putting together this challenge. Though frustrating at times, it was fun. Hearing everyone else's stories easily offset my own frustation.
Best of luck to y'awl. I hope none of you need therapy from this month's experiences.

Good write up Steve and pleased to see you found good in it. Don’t think I’ve ever heard anyone have a good word to say about the wrench…hoping you’ll join the Delemont challenge in October with it if you can stand it…or any Wenger/Delemont

-
Great write ups everyone, been most enjoyable seeing your pics and uses, thanks for a very entertaining challenge

Quite a few of you are already signed up, but don’t forget the Delemont challenge in October and the Delemont GAW which I’ll be picking the winners for next week…love to have you all on board

-
Pretty sure I won't need therapy although this month has been emotional. I could probably use a hug. Thanks to all who participated. It was interesting seeing so many different tools that most of us wouldn't normally chose to carry. A big thank you to Comis for creating this challenge and getting it started and to SteveC and Poncho for issuing badges to everyone.

-
@Echotech said:
Good write up Steve and pleased to see you found good in it. Don’t think I’ve ever heard anyone have a good word to say about the wrench…hoping you’ll join the Delemont challenge in October with it if you can stand it…or any Wenger/Delemont

Thanks, Echotech. Don't hold your breath for my joining. :(
The S557 will hang on my display for a long time, I think. I did find the scissors to be good for cutting tough stuff. The backspring-based scissors spring just feels like it will take more pressure than the Vic springs.
I like the looks of my Wenger Traveler, but I'd still be stuck with the finicky scissors and no mag glass, plus lose the Phillips driver. The Vic Climber is the same idea, but with a bit more utility.
And I'll be coming off a month of Swiss Champ carry (one of my favs) as on Wednesday I join the second half of the Go BIG Challenge for a 30 Day Stacked badge. Not sure I want to take steps backwards on October 1st.
Maybe I'll change my mind, but don't hold your breath. ;)
Day 30 - Bonus Shot!
I managed to sneak a few uses in before day's end:
- Beer bottle opening
- Pot handle tightening
- Dessert opening

-
-
Thanks, Echotech. Don't hold your breath for my joining. :(
The S557 will hang on my display for a long time, I think. I did find the scissors to be good for cutting tough stuff. The backspring-based scissors spring just feels like it will take more pressure than the Vic springs.
I like the looks of my Wenger Traveler, but I'd still be stuck with the finicky scissors and no mag glass, plus lose the Phillips driver. The Vic Climber is the same idea, but with a bit more utility.
And I'll be coming off a month of Swiss Champ carry (one of my favs) as on Wednesday I join the second half of the Go BIG Challenge for a 30 Day Stacked badge. Not sure I want to take steps backwards on October 1st.
Maybe I'll change my mind, but don't hold your breath. ;)
Day 30 - Bonus Shot!
I managed to sneak a few uses in before day's end:
- Beer bottle opening
- Pot handle tightening
- Dessert opening
:)

-
After the parched looking ghost Chilli yesterday here's the OHT with a well hydrated Lily

I think it's fair to say that this has been a struggle for us awl.
For me it has been less of a struggle simply because I had chosen a LM (albeit one I just can't get on with
) Therefore, it's well designed and well constructed.However, I find the OHT blades too short and the plier locking mechanism too fiddly (it just moves on its own) Moreover, it's VERY bulky and has no scissors
It's mostly done everything asked of it but, due to work demands, I've not needed to use it as I used my O/G Surge during July (which is just typical ::) )I guess that if push came to shove I could use it for work, but I wouldn't choose it over my Surge or, if I'm honest, my original work issue MP600. I guess it's just ok

If I had to choose just one LM MT it would be my O/G Surge (not had a chance to use my new B/O one yet because of this challenge
)However, I do like my MXBS and if they made a Surge sized one.... :ahhh :ahhh :ahhh
Well done AWL....

Great job finishing!

I do collect a fair share of LM tools, but OHT is one of those I never did have the desire to get, probably due to the same reasons you have listed. Just never into anything that is bulky or heavy.
Oh, btw, if you could sneak a few fixed blade onto the that machine
, please don't forget to post the pictures! 
@Alan K. said:
Day 30
I just typed out a long treatise on the virtues and failings of the MP600 Pro-Scout, somehow hit the wrong button, and it disappeared. Yelling at the computer that "I have certain skills, and I will find you" did absolutely nothing. Not even going to try to do it again. Short version is, I actually like the MP600. It has some interesting features. You can use the pliers collapsed in the handle as a big tweezers because they will open about 1/4 inch. That might be good for pulling slivers, or fuses, or RAM from a circuit board, and that sort of thing. It also would allow you to use long 1/4 inch bits gripped in the pliers jaws under the pivot (see picture). You would lose the big tweezers feature if you had blunt nose pliers or if you ground down the needle nose, but without the needle nose sticking out beyond the frame the tool could be pocket carried, so it's a tradeoff. The semi-serrated knife blade took a good edge and cuts. You can't ask for much more than that. It is not in regular rotation mainly because the tools are short and for the overall size it doesn't have the same utility as a Rebar or Spirit tool. If you've been carrying a Victorinox Spirit for the last several years as I have, the MP600 lacks any elegance by comparison and just feels like a Soviet farm tractor. You could get the job done if this was all you had and it might even be a better choice than many I've seen.Great writeup and congrats on the finish!I too never EDC a MP600, probably due to the feel of "Soviet farm tractor", but after reading what you have wrote, I felt like it is more like an AK than a tractor. I surely learnt a few new tricks from it, and who would have guessed about the bit holding and tweezer use?

-
Great looking badge thanks comis for the design, Steve and Poncho for awarding it

-
Congratulations to awl who finish with their sanity intact.


@SteveP said:
**Day 30 - I'm done!
**
The S557 waving out the end of the challenge.So how did it do for the month?
Well, it did nearly everything I asked it to do. I don't hate it. It won't be relegated to the Drawer of Shame. But...
Pros:
- I like the 85mm size vs. the larger 91mm SAKs.
- I found the contoured scales comfortable.
- I liked having the nail file in a larger SAK. (Though I did miss having the smaller second blade.)
- I did appreciate the locking knife blade a few times as a safety feature. Especially as the blade on this new SAK is plenty sharp.
Cons:
- The blade lock release lever was always getting caught on my pocket or in my belt pouch. Why Vic would keep something sharp that sticks out that far is beyond me.
- The finicky scissors that struggle to cut anything pliable. I use scissors regularly so not knowing if the Wenger-designed ones would cut the item was pretty frustrating.
- The useless "Universal" wrench. I couldn't come up with a use for it the whole month, not with it stuck in the middle of a five-layer SAK so there's no way to get a grip on anything remotely flush with the surface. I'll stick with my Swiss+Tech Micro-Slim or Leatherman By the Numbers 3 flat wrenches in my pocket EDC kit.
- The fiddly pliers. Seems like everytime I opened the pliers the slip joint slipped to the wide position (or just part way), unless I opened them very carefully. I could rarely just open and use them.
- The very tight and very short inline Phillips driver. Yes, it works, but it's hard to use.
- I don't understand why Victorinox didn't give the bottle opener and inline Phillips the 90 degree stop like the mainline Vic-branded SAKs, unless it has something to do with the push-locking feature.
- No magnifying glass. I use the ones on my mainline Vic SAKs regularly so missed having that on me. I could break apart the S557 and replace the wrench with a 91mm mag glass, but I'd still be stuck with the finicky scissors, fiddly pliers, short inline Phillips, and in-the-way blade lock release lever.
For a concept, the S557 is great. But for execution, I'm not so sure.
Several of you have said that your challenge tool was OK, but not in comparison to what you usually use. I'm in the same boat. If I didn't know there were better choices out there, I might think the S557 a great SAK. But the tools (scissors, pliers, inline Phillips) are executed far better in mainline Vic SAKs or just don't work at all as part of a thick SAK (wrench).
For me, the S557's main competition is my Swiss Champ or my Deluxe Explorer mod (Explorer + pliers), and it just doesn't match up to them. I'll be going back to them, with a useful small wrench in my pocket.
Thank you, Comis, for putting together this challenge. Though frustrating at times, it was fun. Hearing everyone else's stories easily offset my own frustation.
Best of luck to y'awl. I hope none of you need therapy from this month's experiences.

Great pix to finish the challenge with, and thanks for being part of it!
Reading your post, I bring out an old Wenger S557 to play. I too would always prefer the SC over the S557, especially being a big fan of the small blade and Vic scissors.
Good luck to your future S557 mod, please keep us posted!

-
@cody6268 said:
Day 30: Retrospectus.I honestly don't know why I didn't use this tool more. It will be seeing a lot of use in the "Not an SAK" challenge we're doing next month too (though that is mostly to be filled with an Adler/Schrade Camper clone)
There are some things that annoy me:
Phillips is smaller than that on Vic, which means that for some recessed screws, you'll have to get another tool
No toothpick
Completely bass-ackwards compared to that of an SAK. I don't mind it being left-handed (which being left-handed, I love) but my problem is the reversed openers. I'm used to: fat end=bottle opener skinny=can opener. Annoying when I go to open up the cap lifter to pry something, and get the can opener.
The lock. The knife is laid out for LH use, but lock is RH (well, 111mms have that same problem, but backward--they're RH, but LH lock; which makes it super-evident in my Dual Pro which has an RH belt cutter that I can't open with my left-hand, but I can't unlock the PE regular blade with my RH
Rubber. It's just a pet peeve because it doesn't age well. Look at 3/4 of the Gerber Gators that have seen real use. Those that see no u
Cost. MSRP was much more than that of a Tinker (more than $50. I got mine Tinker-priced about a year, maybe two after Swiza commenced making knives. To compete with Vic, you gotta match their prices.
Can opener is thicker than the bottle opener, again backwards that of Vic or Wenger. Logic states that a tool used primarily for screwdriving and prying needs to be thicker.
Too thick behind the edge. My SAKs are typically sharper due to their thin geometry.
Lock. The button lock is decent.I personally would have preferred a backlock, since Swiza, to this date, only has a single backside tool on all models; and thus the blade backspring is empty.
But, what I do like
More left-handed guy friendly.
Ergonomics are so much better than that of a SAK. It's more the taper than it is the rubber, however.
Tweezers are a bit higher quality than Vic's.
The slots are better than nail nicks for opening, and as I demonstrated more than once, usable as tools in their own right.
Awl. It is actually sharp. It has proved that it can do 3/4 of what a pen blade can do.
I opened and installed a new fridge filter. Also pried the O-rings off the old one. I keep them in a box as "just in case". I have used them as spares before. Yeah, they're a "two cent part" but better having them and not needing them than needing them and not having them.
These things have went up quite a bit in the couple of years since it was last replaced. The old was $30 from Lowe's. They're now $45; and Amazon's price, for once, was the cheapest.


Thanks Cody for the closing sum up, and congrats on another challenge completed!

Swiza always strikes me a bit odd in its existence--I would never see them as 'crappy' tools, but yet there is something about them that is 'off'. They have been around for a long while now, but never seems to take a very strong foothold. Given they both have lockable blades, do you think more people would go to Delemont series, instead of Swiza?
But I too wonder when will the rubber handle fall apart, and it seems inevitable.@SteveP said:
I'm a big fan of the Gerber/Ganzo hex bit adapter also. It fits great on the inline Phillips on SAKs (with a slight shim) so I carry it and some bits in my pocket EDC kit.I first discovered the adapter on a Winchester mutitiool, then tracked down the bit kits with adapters on AliExpress.com for less than $3 US.
I have made an adapter for my SAK with a square to hex adapter and J-B weld, but this thing is so inexpensive and ready-made that probably will beat that left and right. Nice find!
-
@Sos24 said:
Day 30

After a month of carrying and using, my opinion of the Minimaster hasn’t really changed. It is not a bad tool, but there are just better options out there.The Minimaster also has to flaws that are common in lots of tools but iritate me nonetheless -
- having to open something to access the tool you want vice just opening the tool you want
- tool clumping - I can’t stand when I’m trying to access one tool and multiple open.
I also realized the Minimaster missed on a few things that just don’t make a lot of sense to me
- File and Phillips only being one sided. This makes them less functional for no reason.
- Then wrench holes did not include a 1/4in that could have been used for bits. This one change would have increased functionality a lot.
Thanks for being part of the challenge, and the good write up!

I think I have now read the majority of the review/summary of the challenge participants, and save Alan who seem to find his new love for MP600, most folks have seemed to taken a 'neutral' view on their tools. I don't know whether it is same sentiment right from the start, and whether being indifference is better or worse than hating the tool. But secretly I do wish all the tool designers would do the same challenge, even just for a week or two, to get real world feedback instead of relying on intuition or computer designs.
@Poncho65 said:
I am finally at a computer instead of a phone and can see who has badges and who doesn't
:DBadges awarded to SteveP and Adam5

Congrats to everyone that has the badge
and if you still lack it, just go and request it and we will get to you as soon as we can 
Thanks Steve and Poncho helping us with the badges and rewarding them.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
SAK, buck 112 and rebar for me :)