How do I carry one extra bit?
-
I modded my Charge specifically to solve this problem as at the time I was using both the phillips and hex bits constantly. I've gone back to standard config with a sheet of my most used bits as the Charge now lives on my bike but I would always be on the look out for a better solution, including for a future Curl. The skeletool spoiled me, the extra bit storage was a very elegant use of space and much appreciated.

-
Great pic and mod, poms
The double bit driver sure has its advantages and it is sad that when he Charge + came out the ALX was discontinued :-\ -
@pomsbz said:
I modded my Charge specifically to solve this problem as at the time I was using both the phillips and hex bits constantly. I've gone back to standard config with a sheet of my most used bits as the Charge now lives on my bike but I would always be on the look out for a better solution, including for a future Curl. The skeletool spoiled me, the extra bit storage was a very elegant use of space and much appreciated.
Looks alot like my recent Wave mod.
2 bit drivers, Rebar awl and pliers, large flathead as pry tool. -
@ElizabethGreene said:
Proposed solution, revision 1, a bit-holding wave scale.Would love to know how you did this as I'd like to carry more bits with my Wave also.

-
That extra bit holder is great
.But just in case, here's another tip to carry an extra bit.
Try to find one of the old style nylon Leatherman sheaths, these have a "hidden" pocket underneath the velcro patch that can easily hold a couple of bits (or other stuff).
You might have to get a bit (pun intended) creative with a piece of cardboard, or stick the bit to a piece of ductape, since getting it out of the hidden pocket can be hard (you could always flip it up-side down and it will fall out, but that's not really convenient now is it?).


-
Thanks! I designed and 3D printed it.
@OldBoy2016 said:
Just something to look up. The glass breaker may not be safe to use on the Wave since the locking bit holder folds in and out. With the Skeletool the bit holder is fixed so that during hard impact it won’t fold in accidentally.That's very good to know. I have a pull-a-part junkyard near me; I should go see the manager and ask if they'll let me try it out. The last/only time I broke a car window I was shocked how much force it took. I was wailing on it with a hand hammer/hatchet and it would not break under repeated blows. I had to pry the window frame to break it.
@Top-Gear-24 said:
That extra bit holder is great
. But just in case, here's another tip to carry an extra bit.
Try to find one of the old style nylon Leatherman sheaths, these have a "hidden" pocket underneath the velcro patch that can easily hold a couple of bits (or other stuff).Oh, that's fantastic! I'll definitely be looking for it.
Update: I missed a serious bug in this design. It sticks up higher than the blade and prevents the pliers from closing.
I had to break it off to fix my sister's oven. I'm going to tweak it and reprint it, hopefully this week.I need some help though. Does anyone have the dimensions of a Swiss Army Knife Toothpick? As part of the redesign I'm going to add a couple of slots to fit them so I can carry a toothpick and one of these firestarters.
https://amzn.to/3Bvr8wO (Amazon affiliate link)

(Once I have working prototypes I'll hang these up on Thingiverse so anyone can download and print them.)
-
@ElizabethGreene said:
Thanks! I designed and 3D printed it.That's very good to know. I have a pull-a-part junkyard near me; I should go see the manager and ask if they'll let me try it out. The last/only time I broke a car window I was shocked how much force it took. I was wailing on it with a hand hammer/hatchet and it would not break under repeated blows. I had to pry the window frame to break it.
Oh, that's fantastic! I'll definitely be looking for it.
Update: I missed a serious bug in this design. It sticks up higher than the blade and prevents the pliers from closing.
I had to break it off to fix my sister's oven. I'm going to tweak it and reprint it, hopefully this week.I need some help though. Does anyone have the dimensions of a Swiss Army Knife Toothpick? As part of the redesign I'm going to add a couple of slots to fit them so I can carry a toothpick and one of these firestarters.
https://amzn.to/3Bvr8wO (Amazon affiliate link)

(Once I have working prototypes I'll hang these up on Thingiverse so anyone can download and print them.)
Adding tweezer/firestarter slots would be awesome.
-
Here you go...so many links on Thingiverse...that one should work for you.
-
You’ve done more than I ever did in trialing glass breaking 👍
From what I understand how a proper glass breaker works it should be easier due to the carbide composition and smaller point.
Also they recommend that you break the glass on a corner (forgot where exactly or which car side) which seems to make it less effort. I’m sure we have MTO members who are EMTs or LEOs that can advise better.
-
Most folks try in the middle. What you want is to attack it where the window goes into the frame...so along the edges works best.
-
Nice idea 8)

Something similar should work for a bit though

-
Necropost.
If you can find one, a Leatherman by the numbers #4 keychain tool does exactly this and also acts as an emergency screwdriver if you don't have full size tool to hand:
https://www.bhphotovideo.com/c/product/1140246-REG/leatherman_832119_by_the_numbers_4.html/specs
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

