Leatherman Core mod
-
I am a big fan of the Leatherman SuperTool family and like including one in my work EDC. But the tool set could use a little tweaking to suit my needs better.
I decided to rehabilitate a worn and rusty Core and make some changes to the tools in order to make it a part of my work EDC.
I don't have a before picture of the MT, but here is one of it soaking in WD-40:

Out of the soak:

It took 20 minutes to work all of the rust out of the pliers head.After cleaning and rust removal, I started working on the mod. One of the things I like to do is acid etch the handles. It gives some color contrast to the MT and makes the handles grippy:

I decided to use the acid etch to make the pliers head pop a little visually. I put the head into the etchant and left until the desired color was reached, and then used 600 grit sandpaper to remove the black oxide from the polished surfaces and leaving it in the recesses:

I have a Leatherman ratchet that I want to be able to use with this MT. I have a Multiforce knife with a 1/4" bit holder that works great with the ratchet, and I would love to use my second 1/4" bit holder for the Core. But I previously removed 1/16" from the notch for the back lock, so the fit is too loose. My solution at the moment is to use a bit adapter from a well worn Surge I have:

I cut down the PE blade to the shape I prefer (sheepsfoot/Wharncliffe):

I took a page from Poncho and sharpened the can opener so that it can be a package opener also:

I cut down a small prybar that I bought from Home Depot, removed the paint, and acid etched:

I used the chisel in my Swisstool as a model for modifying the medium straight driver (the wire stripper works well):

I have retained the saw, the awl, the file, the large straight driver, and the Phillips driver, though the latter three are more or less placeholders at the moment.



I would like to add a pair of tweezers, which may not be too difficult given the Core's Zytel liners. I would like to change out or modify the large straight driver and the Phillips driver to something more useful. And I will probably cut down a file to replace the existing one. It has some wear.
-
Nice job - I like the sheepy.

-
Thank you Fuzzy!
-
I meant to add that, at this time, I don't plan to add scissors. I have a pair of detatchable scissors from a Chinese MT that work great and do not take up much space that I plan to EDC also.
-
Very nice 8) great step by step pics of the mod and some really nice ideas

-
That tool looks really great, Adam, and the contrast in colors looks stunning (particularly the pliers head!). Congrats on a job well done.

-
Thank you gentlemen

-
The plier head etching really does make the whole mod pop 8)

-
Very Nice! I love all the tools that can be housed in the larger Leatherman frames.
-
nice work! Need more modders here! Getting quiet lately... -
Really cool mod!
[It's not failure if you learn something from it]
-

This certainly merits an entry in this thread: /topic/74592
-
@kottskrapa said:
Really cool mod![It's not failure if you learn something from it]
Thanks!
-
This certainly merits an entry in this thread: /topic/74592
Thank you

I will post this mod there. -
Very nice mod!
-
Thank you kind sirs!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login