only two, a minimalism exercise
-
As this is just MT’s I’m assuming you’re allowed knives…if not :ahhh
Also going with only things I own, so although I’m more likely to carry a rebar or spirit, first choice is my Wave with bit kit
Second has to be a SAK, so back to assuming knives not a problem then it’s Farmer X, if no knives :ahhh then Outrider
-
If there isnt chance to sharpen knives with essential sharpening tool. I would definetly choose WorkChamp and Charge TTi with full bitset. Workchamp has superior metal saw, Wood saw and bigger blade compared to charge but Charge has bitkits and precious diamond file and better pliers.
i would also considere replacing Charge with CenterDrive but its way too compicated to get diamond file to it and it needs way better cutters to it. Considered also mp600 variants since Gerber tools has better tolerance for dirt before clokking.
But since Gerber doesnt have diamond file i would choose Charge
Only Tools Matters
-
I already carry the only MT that I seem to need,why would I carry anything else?

If I carried 2 I think my pants would fall down.

-
Since I don’t know what the situation is I suppose I should be prepared for any possible scenario. For me, this means Leatherman Wave and Knipex pliers wrench.
The Wave has already proven itself for 10 years on my belt in the woods and in everyday life, and really it’s the only tool I need. the Knipex would be in case the situation involves machinery or car trouble, and pretty much cover everything the Leatherman pliers can’t.My runners-up would be a SwissChamp and a roll of duct tape

-
@trichosirius said:
My runners-up would be a SwissChamp and a roll of duct tape
This gave me a good idea, so I'm changing my picks.
My first tool is a homemade mallet I created by duct taping all of my knives and multitools to an axe handle. For my second tool, a complete socket set duct taped to a claw hammer. :D
-
@Echotech said:
As this is just MT’s I’m assuming you’re allowed knives…if not :ahhhAlso going with only things I own, so although I’m more likely to carry a rebar or spirit, first choice is my Wave with bit kit
Second has to be a SAK, so back to assuming knives not a problem then it’s Farmer X, if no knives :ahhh then Outrider
A SAK is the very definition of MT, because it has multiple tools.
I don't care if you own it or not, if you do that's your choice, either way you don't need to tell me that. You mentioned 5 tools. The task is to present two and only two so I don't see a acceptable answer. I want to know why you chose two tools, not what tools you didn't. -
@Antti Lammi said:
If there isnt chance to sharpen knives with essential sharpening tool. I would definetly choose WorkChamp and Charge TTi with full bitset. Workchamp has superior metal saw, Wood saw and bigger blade compared to charge but Charge has bitkits and precious diamond file and better pliers.i would also considere replacing Charge with CenterDrive but its way too compicated to get diamond file to it and it needs way better cutters to it. Considered also mp600 variants since Gerber tools has better tolerance for dirt before clokking.
But since Gerber doesnt have diamond file i would choose Charge
Only Tools Matters
You mentioned four tools. The rules state only two.
-
@Rich_SD said:
This gave me a good idea, so I'm changing my picks.My first tool is a homemade mallet I created by duct taping all of my knives and multitools to an axe handle. For my second tool, a complete socket set duct taped to a claw hammer. :D
Well aren't we creative? I think we have our class clown.
-
Are you calling a flashlight a tool for the purposes of this exercise?
And perhaps instead of being so strict about only mentioning two, ask people to bold or make clear their final choices? A lot of people like to put down their thought process.
-
Ok so as for now I don't have a second tool. As for my first choice, since you say we can use the bit cards I'd also use my bit extender if thats allowed. Truth is I don't require either with the Surge because I can use any 1/4 bits by making a extender.
The Surge for me is the most versatile MT. With the ability to use a variety of saw blades there is not much I cannot but. If I wear out a saw blade, no problem. I've even used a blade that was pretty long for things that needed more reach.
Being able to use/make na extender to accept 1/4 inch bits further opens this tools capability. I can make one that has reach or as I've done make a ratcheting one then use sockets. Now the torque applied wont be substantial but within reason its a nice ability. I've even used my Surge as a hammer
. Now lets be fair, I wasn't driving 3 inch nails.If I was limited to 2 tools this one tool sure stands out to me. Talk about the ultimate in MacGyver opportunities.

-
@GearedForwards said:
Are you calling a flashlight a tool for the purposes of this exercise?And perhaps instead of being so strict about only mentioning two, ask people to bold or make clear their final choices? A lot of people like to put down their thought process.
Everyone has their process thats for sure. 
-
Just to be clear. The Surge is my choice. There is no need for having the other items in the picture since I can find/borrow them?
I've made several bit extenders over time and even made a ratcheting one. As for LM flat bits, they are very nice but once the bit extender is made or bought any 1/4 inch bits work just as well.
-
When I was packing up to move back to Northern Ireland, I had to pack everything I was keeping for transit. At that point I kept my Spirit and one of my Swisschamps. Between them they covered all my needs.
If I were to face a similar scenario today, I'd still go with the Spirit. I may pick one of the Victorinox ratchet sets over a SAK as the second item
...no, no I'd take my Vic Tinke...Sparta...damn it! Ok Vic PX, yeah, Pioneer X -
@Aloha said:
Ok so as for now I don't have a second tool. As for my first choice, since you say we can use the bit cards I'd also use my bit extender if thats allowed. Truth is I don't require either with the Surge because I can use any 1/4 bits by making a extender.The Surge for me is the most versatile MT. With the ability to use a variety of saw blades there is not much I cannot but. If I wear out a saw blade, no problem. I've even used a blade that was pretty long for things that needed more reach.
Being able to use/make na extender to accept 1/4 inch bits further opens this tools capability. I can make one that has reach or as I've done make a ratcheting one then use sockets. Now the torque applied wont be substantial but within reason its a nice ability. I've even used my Surge as a hammer
. Now lets be fair, I wasn't driving 3 inch nails.If I was limited to 2 tools this one tool sure stands out to me. Talk about the ultimate in MacGyver opportunities.
That's the sort of answer I am looking for. Thanks
-
@kirk13 said:
When I was packing up to move back to Northern Ireland, I had to pack everything I was keeping for transit. At that point I kept my Spirit and one of my Swisschamps. Between them they covered all my needs.If I were to face a similar scenario today, I'd still go with the Spirit. I may pick one of the Victorinox ratchet sets over a SAK as the second item
...no, no I'd take my Vic Tinke...Sparta...damn it! Ok Vic PX, yeah, Pioneer XIf you left out the second paragraph you would have aced it. I figure I got my answer.
-
@GearedForwards said:
Are you calling a flashlight a tool for the purposes of this exercise?And perhaps instead of being so strict about only mentioning two, ask people to bold or make clear their final choices? A lot of people like to put down their thought process.
I tried posting a response to this before and the internet monster ate it. Okay trying again.
You are entitled to a thinking process. I'm just not interested in the process of elimination. If you want to talk about individual tool choices you would liked to have had I can allow that. By individual tool choices I mean things like a saw or a magnifying glass. I had hoped by allowing modded MT's would head off that issue. Talking about other MT's is considered waffling and that is why I only want to hear your final two. You are completely free and encouraged to comment on other peoples choices without any limits. For example, you can tell someone that their choices are or were considered.
A flashlight is a single purpose tool so it doesn't enter into the equation. I am seeing a lot of questions regarding single purpose tools.Let me clarify something. I am only asking what two MT's you would choose to carry with you. You aren't trapped on a desert island. You can in theory go around the corner get a tool out of a tool box. Just bear in mind that your first option is to reach to your belt, pocket, bag, whatever and use the MT's you have chosen.
Okay I think I started a tool box thread a long time ago, but as a pressure valve this might help.
NEW RULE! What's in your tool box? You can list the contents of a small tool box/bag. I imagine there will be pliers and adjustable wrenches, and flashlights. I'm curious to see what else you might have. The only thing you can't have in the tool box is MT's. You also have to be able to carry this tool box with one hand. If you aren't sure if it is a MT, ask. Go crazy guys. -
@Scorpion Regent said:
I tried posting a response to this before and the internet monster ate it. Okay trying again. You are entitled to a thinking process. I'm just not interested in the process of elimination. If you want to talk about individual tool choices you would liked to have had I can allow that. I had hoped by allowing modded MT's would head off that issue. Talking about other MT's is considered waffling and that is why I only want to hear your final two. You are completely free and encouraged to comment on other peoples choices without limit restraint.A flashlight is a single purpose tool so it doesn't enter into the equation. I am seeing a lot of questions regarding single purpose tools. I am only asking what two MT's you would choose to carry with you. You aren't trapped on a desert island. You can in theory go around the corner get a tool out of a tool box. Just bear in mind that your first option is to reach to your belt, pocket, bag, whatever and use the MT's you have chosen.
Okay I think I started a tool box thread a long time ago, but as a pressure valve this might help.
NEW RULE! What's in your tool box? You can list the contents of a small tool box/bag. I imagine there will be pliers and adjustable wrenches, and flashlights. I'm curious to see what else you might have. The only thing you can't have in the tool box is MT's. If you aren't sure if it is a MT, ask.Well, my answer would be Wave+ with bit kit and bit extension, along with an Explorer with plus scales.
That will be my last contribution to this thread, I think you misunderstand the spirit of a forum discussion and would have been better off making a poll.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login