What Did You Use Your Multitool For Today?
-
Well let see I carry a Spirit everywhere I go and today I used it for the normal stuff like taking off hubcaps,
cutting wire, picking up objects too many things to really write down.Actually I use it alot without even thinking about it. :D

-
Tool: LM Skeletool
Task: Cutting twine for tying up peppers.
Performance: Excellent
Rating 10 out of 10.
Tool: Cybertool 41
Task: Slicing tomatoes
Performance: Flawless
Rating: 10 out of 10. No squishing of the fruit.
-
<necessary_thread_derailment>
Ummm... What's with the new avatar SwissMan?
:D
</necessary_thread_derailment>
-
Avatar looks good to me >:D
@Mr. Whippy said:
Tool: LM SkeletoolTask: Cutting twine for tying up peppers.
Performance: Excellent
Rating 10 out of 10.
Tool: Cybertool 41
Task: Slicing tomatoes
Performance: Flawless
Rating: 10 out of 10. No squishing of the fruit.
Was gonna buy a Vic paring knife, but maybe one of my SAK's will do just fine
-
Task: I just finished using my modded beater Kicks awl to start some holes for some hooks under some shelves for my wife to hang some girl stuff on. She has been bugging me forever to do it and I finally got around to it today.
Performance: Worked great
Rating: 8 out of 10
-
I used the blade on my paratool to open a packet of pumpkin seeds.... it didn't struggle with that!
Not much else to report here today ::)
-
I used my Vic Spirit to pick up a dead spider, that's it today.
-
freestyle, to help me with a key-ring(i didnt have strong enough nails)
-
I used my Charge TTi's cutting hook to open two packages I got in the mail.
10/10
-
I used the trusty Sideclip to unclog the bath tub drain. Then the tool was soaked in oil.
-
I used my new old model Wave to put together a LG endcap and Sony Eco endcap today at BestBuy. I had to thread an HDMI cable thru the back of them.
-
I used my EDC SwissTool as a hammer to persuade some parts of a large projector screen into place.
More appropriately, I used the pliers to unstick some stuck connectors and one of the blades to slit open some parts bags.
No matter how much I use or even slightly abuse the SwissTool it keeps coming back for more.

-
Tool: Juice CS4
Task: Dinner preparation. Peppers sliced, safety seal wraps removed, beer bottles opened
Performance: Very good.
Rating: 8 of 10. (2HO subtracts 1 point and lack of pocket clip subtracts 1 more)
-
Work locker PST, to open battery compartment on a tympanic(ear :D) thermometer & change dead batteries.
Tools used medium screw driver to undo screw & small screw driver to carefully lever dead batteries out.10 out of 10 :D :D even stayed back 2mins late to do it :o :o :D
-
Pretty good day out for a swisstool spirit this evening, lots of staples removed from the back of stage masking that was otherwise going to cause some cut fingers. Picked up quite a few hot things with the pliers and used the awl a lot to put in several screw eyes.
Also dismantled 2 moving lights in the morning as a work colleague got interested in how they worked and asked for a guided tour of their innards
Highlight was discovering I had the only tool able to get a screw out of an awkwardly placed hinge as the vic ratchet got its workout for the day
Spirit scores 10/10
-
Tool: Skeletool
Task: Refilling the hydraulic fluid in the VW Cabrio for the pump that raises and lowers the soft top.
Performance: Excellent.
Rating: 9 of 10. I chose to use a 13 mm socket to remove the brass fill plug. Couldn't use the Skeletool bit driver to turn it due to space restrictions.
-
Task: Cutting up pleated air filter to fit into slot/ductwork that was butcherized by the install company.
Tool: Vic Rescue Tool - Serated blade
Performance: Excellent, great blade for cutting all kinds of material, especially cardboard.
Rating for task: 9 out of 10 -
task: replacing door and hardware..... check proper wiring of wall outlet (no power)
tool: hitachi impact driver (battery died otherwise the best of the best.... no S....)... swiss spirit BO
performance: hitachi... 10 out of 10 for 2 years and going strong. the dead/ dying battery was my fault.
spirit... saved a trip back to the truck... 10 of 10... phillips driver grabbed and set latch screws smartly. the bonus was that the spirit could be extended to get access to the handset screws to work quickly. these are especially difficult to get at due to the shape of the knob and the angle.
the wall outlet was childs play.
note to self: charge batteries for hitachi driver... always carry the spirit... you never know when you may need it. you suck as an electrician.spirit phillips fits 1, 2 and #3 heads in a pinch but is perfect for #2 heads. flat head (bottle opener) driver is perfect for wall outlet cover screws.
result: door and hardware came out perfect. had to call an electrician for the outlet. -
Just used my Classic's scissors to cut some price tags off my new shorts.
10 out of 10
-
Used my Fuse (won here on a give-away
) to cut ropes holding the door/gate of a couple of wagons full of straw bales. Then I had to stack the bales. :'( I also used the Phillips to open up a connection box on a small motor used for sorting rye. (Actually I had to do that twice to rewire it to get it to spin the way we wanted it to.) Also used the needle-nose to grab a hard to reach nut. I also dropped it on concrete with no ill effects. ::)Everything worked exactly as I'd want it to.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login