The Hacked Leatherman Owners Club.
-
Any comprehensive Leatherman modding kit needs a set of Loki's wrenches for Leatherman's proprietary screws. They make disassembly of the PST/PSTII, Blast/Fuse/Kick, Rebar, Bond, etc. much easier and less damaging than grabbing those screw heads with pliers.
-
Ah yes, I do have those in it but I forgot to list them.
-
@4.19.93Waco said:
I currently use a worn out sharpenig rod as well, but as I often use BO tools in my mods one slip means an ugly scratch along the tool, which is not ideal. I suppose you could do a set of several of these rods1/8' for Style
7/64" for Wave Plier pivot
3/16" for Wave Tools
And whatever the Wingman uses, as I know those are also a pain to put back together due to spring tension.I'm working on putting a mobile modding kit together for all of the "Lego" (drop in) mods you can do on a Leatherman tool. These would make a great addition, but I am not sure how expensive they would be to produce.
The kit currently has the following
- 2 IFixIt drivers with all of the torx bits needed to take apart a Leatherman (I have the 5 star bit but they are in 1/4" instead of 4mm, I think I will grind them down to 4mm)
- IFixIt case which doubles as a part tray
- Tweezers
- Small amount of rust preventative/lubricant called tuf glide. It goes on as a thin liquid but dries to a dry lubricant which doesn't collect dust
- Small butane lighter for breaking down loctite
I want to add at least the 1/8" tool to this, but I might add the others. If you think of any other tools to add to this, please let me know!
7/32" for pliers right?
-
My bad, I believe you are correct.
-
BTW, I love your mobile nodding kit that you showed on your channel. Super capable set up.
-
Thought I'd add some picks of my first Leatherman mod. Already done a couple of SAKs but wanted to do a Leatherman as well. Still work in progress. I started with a silver Leatherman Signal since any scratches are easy to buff out on the main body as opposed to the Cerakoted variants which show up really easily and are impossible to get rid of without re-coating. So far I've:
-
lopped off the hammer part since I won't use it... don't really want to use it as a hammer or use the carabiner clip... the can opener can be re-designed as bottle opener and the bit holder feature is redundant since there is already a bit holder elsewhere on the tool. This allows it to fit into a smaller nylon pouch and also save a bit of weight.
-
Replace the main blade with a S30V blade from a Leatherman Charge .... might design my own damascus blade at later date.
-
Replace the saw with scissors from a Wingman.
-
Re-design the whistle to house tweezers and toothpick instead of ferrocium rod. For this I trimmed down the whistle and cut the channels out of some old Victorinox scales, sandwiched these around a layer of 0.5mm G10 and very carefully shaped and polished.
-
Add a lanyard loop and a bead made from Resinivory, based on the design of a Playge bead.
Still lots to do eventually .... looking to re-design the awl and can opener ... possibly in damascus...... and still pondering the sharpening file although it does make quite a nice nail file ... possinly keep it and re-profile the end to make a nail cleaner??? Not sure.... any ideas??
-
-
An excellent bit of modding, Broog 8) :o

Great pics as well

Plus, welcome to


-
Cheers mate :D
-
Will post updates as soon as I have em.
-
Nice mod and welcome to the forum !

-
Latest update for my Leatherman Signal..... gonna convert the bit driver to a 4mm precision bit driver and have re-designed the pliers in CAD so I can have both made in Titanium ... should hopefully knock another ounce or so off the weight .... and its titanium mwahahahahaha :-) 8) :D 8) :D
Took a full day to do the CAD. And the tab on the hex tool is a blatant rip-off of a Playge bead. Sorry. Tool bits will be held in place with a bonded in magnet.
-
Cool :o can't wait to see the pieces after they are made



-
Latest updates....... titanium plier head ..... uses chopped down pivot from knife and saw. and I replaced the chopped down hammer head with an ABS rapid prototype (fits like a glove) which also uses the locking pin (replaced with threaded tube and 2 screws to retain a titanium lanyard hoop. All in all, weight is down to 160 grams from 212. Aiming for another 10 grams if possible.
next jobs are to
- redesign awl
- re-design can opener as a bottle opener and possibly box cutter in titanium .... almost done.
- Still waiting for titanium bit holder I sent to be rapid prototyped....... 1st model wasn't feasible.
-
@Broog said:
Latest updates....... titanium plier head ..... uses chopped down pivot from knife and saw. and I replaced the chopped down hammer head with an ABS rapid prototype (fits like a glove) which also uses the locking pin (replaced with threaded tube and 2 screws to retain a titanium lanyard hoop. All in all, weight is down to 160 grams from 212. Aiming for another 10 grams if possible.next jobs are to
- redesign awl
- re-design can opener as a bottle opener and possibly box cutter in titanium .... almost done.
- Still waiting for titanium bit holder I sent to be rapid prototyped....... 1st model wasn't feasible.
MY GOD! that plier head is amazing! would you consider selling a pair????
-
Very cool :o :ahhh

-
You might re-consider when you see how much titanium rapid prototypes cost...... I got mine printed at I-materialise. I've attached the stl file of the CAD if you want to make some yourself. If you have them made, you'll still need to make a pivot, find two .005" inch phosphor bronze washers (I use 1x .005 and 1x .010)...... ,and a belt sander to polish the edges. I had to slightly re-tension the fork spring to work with these (the spring in one side of the handle that expands to lock the main blade to prevent opening when using the pliers). Stiffness isn't bad but not as stiff as the original steel ones which means slightly more sideways play.
Ammendment .... wont let me post with STL attachment ..... if you want the STL file, let me know how to get it to you.
-
Thanks for the likes :D :D :D
-
Managed some more updates to my Leatherman Signal....
- Had to re-make the tweezer/toothpick holder since my Titanium plier head design allows the handle to close more than original when using..... so the diamond file crushed it when I squeezed the pliers.
- Redesigned titanium bit holder arrived.... needed a fair bit of filing to get to work as intended but now holds both leatherman bits and 4mm precision screwdriver bits using the same carry-over spring mech from a donor bit holder. Still haven't tested yet for strength..... so not getting rid of original bit holder in a hurry!
- Removed can opener and designed a new tool in Grade 5 titanium ...... a bottle-opener/box cutter. it has a reverse mounted bottle opener on the back of the blade (came up with this idea wen doing my last SAK mod) and the box cutter has a false edge on the back to allow it to fit better with pliers when folded. Grade 5 titanium is ABSOLUTE pig to work with but at least it saves weight!. Took about 3 hours for me to fabricate a new lanyard hoop.... why is it that sod's law waits till you're just about done before you drop the sodding thing and then spend another 1/2 hour trying to find it, whishing you'd made the workshop just a little tidier!!!!
- made bottle opener on new box cutter redundant after redesigning lanyard loop to include bottle opener ..... much better than box cutter since I now don't have to pfaff with opening tool just to take the lid off a bottle :-) .. unfortunately it means i have to re-design the box cutter. it slots into the ABS rapid prototype I made to replace the hammer and uses a pin to secure. very pleased with this..... its almost too simple :-)
Next job is to re-design box cutter <u>again</u> and awl, so some pondering to be had to come up with two tools that work well together in that space..... again in titanium.
Now down to 156 grams (or 151g without the lanyard bead)....... would be awesome to get this under 142g (weight of a standard skeletool).
-
Wow :o those are some awesome mods
excellent work

-
Bloody brilliant!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login