Social Media Stuff
-
SOG stuff, at least knives and hawks, are probably more accessible here in Canada than anything else, oddly enough. Although, you really don't see the tools much.
Def
-
Channeling my inner Chris Farley meme on this one.
Remember that time that Wenger produced a line of knives for Buck? That was awesome...
This SwissBuck SwissMate III was based on the 120mm Ranger series and is virtually identical to the Wenger Ranger Mountaineer except for the textured black scales and SwissBuck logo.
To learn more about the SwissMate III, the SwissBuck line in general or other cool Swiss Army Knife info, check out SAKWiki.com! https://sakwiki.com/tiki-index.php?page=SwissBuck+Swissmate+III
@wenger_official @buckknives #buckknives #buckknife #swissbuck #swissbuckranger #swissbuckswissmate #swissmate #swissarmyknives #swissarmyknife #swissarmyknights #howmanytimescaniuseswissinhashtags #sakwiki #pocketknife #Wenger #wengerranger #wengerswissbuck

-
One from the Sacred Texts of the Swiss Army Knights today! :D
Whether you refer to it as a German Army Knife, a GAK, or Bundeswehr, this knife was made on a 108mm frame by Victorinox- and is identical to knives made for the German Army by many other manufacturers.
Technically speaking (which is understandable when discussing a Swiss knife, made for the Germans!) this is a knife unofficially known as a GAK-2 as it incorporates the nail file-like texture into the side of the saw.
Victorinox liked the military spec of this model to launch an entire line of civilian knives based on the 108mm frame, but not enough to keep it when the German Army specs were updated, and this design was replaced with a German Army variant of the Victorinox One Hand Trekker.
Learn more about this very cool knife (and series!) Perusing the Sacred Texts of the Swiss Army Knights at SAKWiki.com! https://sakwiki.com/tiki-index.php?page=GAK
@victorinox @victorinoxnorthamerica #germanarmyknife #gak #swissarmyknife #swissarmyknives #swissarmyknights #sakwiki #victorinox #victorinoxswissarmyknife #victorinoxswissarmy #victorinoxswissarmyknives #victorinoxgak #bundeswehr

-
The saw/whatever it all does :D always looked liked a torture device to me :ahhh
-
It's actually really cool when you think about it. It gives you several extra inches of leverage for those really tough bottle caps!
Def
-
@Grant Lamontagne said:
They sure did, and it's sad to see that Victorinox isn't interested in that stuff anymore.I think they should have turned Wenger into their in house skunkworks type department, cranking out new and fantastic ideas.
I love Victorinox, don't get me wrong, but they aren't the most dynamic company, are they?
Def
I had to read that twice to believe my own eyes!!
That echoes what I used to say back in 2013…boy did I get flamed!!You are right Def, as was said back then Victorinox now owns both patents and removed one from production! Since then the SAK style tool has stagnated.
Although I kept all the Vics I owned I haven’t really added anything new since wenger ceased. Has the Vic line even evolved??…. besides the fake Wenger clones they released.
Last I looked Vic simply paints a Alox or adds a funky scale to a bog standard tool. Hardly pushing the boundaries like it’s nemesis once did.
(Nemesis: Someone's nemesis is a person or thing that is very difficult for them to defeat.)
Victorinox in a sea of Wenger is like a nun at a rave party!! Dull beyond words.
-
I missed yesterday's upload because I broke my Jeep and almost broke my ankle again, so I was a bit distracted.
Here is today's installment.
As the story goes, Leatherman had the One Hand Tool (OHT) designed and ready to be marketed the day that Gerber's sliding head plier patent expired, as they intended to compete for military contracts that required this feature.
The OHT features tools that are all accessible one handed- although in practice, some are available with the right hand, and others only accessible with the left. One neat feature, seen earlier on the BuckTool 360 years ago, is the pictographs on the handle to tell you where each tool is located.
If you are interested in learning more about the One Hand Tool, be sure to check out the Multitool Encyclopedia at Multitool.org!
@leathermantools @leathermanuk @leathermancanada #leathermanonehandtool #leathermanoht #leathermanohtcoyote #leathermanohtcoyotebrown #leathermanmultitool #leathermanmultitools #onehandtool #onehandtools #multitools #multitool #multitooldotorg #gerbermultitools #bucktool #bucktool360 #buckknife #buckknives


-
It's a shame you gave this one away, or not as I've got it [emoji1787]

-
-
@tosh said:
I had to read that twice to believe my own eyes!!
That echoes what I used to say back in 2013…boy did I get flamed!!You are right Def, as was said back then Victorinox now owns both patents and removed one from production! Since then the SAK style tool has stagnated.
Although I kept all the Vics I owned I haven’t really added anything new since wenger ceased. Has the Vic line even evolved??…. besides the fake Wenger clones they released.
Last I looked Vic simply paints a Alox or adds a funky scale to a bog standard tool. Hardly pushing the boundaries like it’s nemesis once did.
(Nemesis: Someone's nemesis is a person or thing that is very difficult for them to defeat.)
Victorinox in a sea of Wenger is like a nun at a rave party!! Dull beyond words.
I can't think of any Delemont Series Vics I have purchased either. Or any, actually.
The fact is, necessity is the mother of invention, and Victorinox really doesn't need anything, so why bother? All they seem interested in nowadays is doing these special ALOX runs for, well, pretty well anyone. I get it, that's what is selling right now, but it's not exactly innovative, and that's why we haven't done another MTO version.
Of course, Leatherman has the same problem lately. The Free series was crap, the Tread was little more than a publicity stunt and now their three new models this year (the PST 3, Half a Wave and Costco Exclusive Confused Wingman) are not exactly imaginative either.
Say what you will about Gerber and SOG, but I have to say the Power Access Assist is a worthy successor to the PowerLock, and the Center Drive is an excellent redesign that both advances and yet stays true to classic Gerbers.
I miss Wenger and thei innovations and collaborations, and it's sad that these companies no longer invest in the innovative and bizarre.
Def
-
It is nice to see my thoughts on the state of SAKs mirrored so nicely...and that of Leatherman as well.
I have not added many SAKs to my collection of late because special edition colours to not get my boat revving at all. In fact, the latest were Wenger models I was able to find in the wild, Although next time you are in the area Def, Thessalon's supply has now dried up of them.
Leatherman still pissed me off, seeing that I dearly want to add a G10 Charge Earth, a No hands Leatherman tool, and a Topo Skeletool...and now that Costco exclusive to my collection, but cannot get because I am in Canada. Trying to collect their stuff is very annoying for someone not living in the US. I also agree with the lack of innovation currently found in this company as well.
-
There does seem to be a familiar pattern emerging here..
Tim leatherman semi retires and with it goes the quality.Carl Elsener passed away and the innovation disappeared along with him
Don’t know if Gerber or SOG are still run by the same person that brought us the over engineered Gerber's and SOG’s of yesteryear.
It seems the newer generation of CEO’s have a completely different mindset.
I often get the feeling those early pioneers wanted to build and deliver the best possible tools, the byproduct was profit, today it seems they want to deliver maximum profit with the byproduct being a much inferior tool.
-
I'm pretty sure SOG is still run by Frazer, but they changed a lot of people in the design team to get the brand popular again

Gerber I have no idea about
Sent fra min M2002J9G via Tapatalk
-
@RF52 said:
I'm pretty sure SOG is still run by Frazer, but they changed a lot of people in the design team to get the brand popular again
Gerber I have no idea about
Sent fra min M2002J9G via Tapatalk
You clearly know more than me. The early SOG’s and Gerber’s were way over engineered.
However, like I’ve stated in separate threads I think the tool load out is the Achilles heel. Why would you buy a new MT costing £££‘s when a used one off eBay for £‘s does exactly the same thing….probably better actually!!I can’t ever envisage myself buying another new Leatherman or Victorinox simply because they offer nothing new.
The fact LM after 36/7yrs of production still hasn’t developed a blunt nosed plier head is no longer a joke….it’s a embarrassment. I’m assuming it’s because the chassis and linkages couldn’t withstand the pressures exerted. Too arrogant to source outside expertise, so instead they simply come up with cheesy names and silly covers.
Fair do’s, whatever….
The tragedy is they originally weren’t like that. Same goes for Victorinox. Years gone by they were exciting, now it’s the same old same old with silly paint schemes and sparkly scalesPathetic
My main hobby is photography
I’ve only really ever used canon
Originally with the old FD mount, was fine. Canon then introduced the EF mount. At first I decided I was fine without it, but eventually I realised it was better so had to start over again, then along came digital…again I didn’t want to upgrade but I was missing out on so much that I gave in, now mirrorless has come along and I find it offers new and exciting aspects that my current gear doesn’t give so I’ll probably upgrade again….What I’m referring to is Canon are constantly moving forward with much better technology.
The same can’t be said for the MT / SAK market. It’s as dull as ditch water, basically overpriced crap. Hence save your money and buy a older used tool. When sales dwindle they may either go bust or get to work , as it is it’s nothing more than stagnant and depressing.
-
@tosh said:
You clearly know more than me. The early SOG’s and Gerber’s were way over engineered.
However, like I’ve stated in separate threads I think the tool load out is the Achilles heel. Why would you buy a new MT costing £££‘s when a used one off eBay for £‘s does exactly the same thing….probably better actually!!I can’t ever envisage myself buying another new Leatherman or Victorinox simply because they offer nothing new.
The fact LM after 36/7yrs of production still hasn’t developed a blunt nosed plier head is no longer a joke….it’s a embarrassment. I’m assuming it’s because the chassis and linkages couldn’t withstand the pressures exerted. Too arrogant to source outside expertise, so instead they simply come up with cheesy names and silly covers.
Fair do’s, whatever….
The tragedy is they originally weren’t like that. Same goes for Victorinox. Years gone by they were exciting, now it’s the same old same old with silly paint schemes and sparkly scalesPathetic
My main hobby is photography
I’ve only really ever used canon
Originally with the old FD mount, was fine. Canon then introduced the EF mount. At first I decided I was fine without it, but eventually I realised it was better so had to start over again, then along came digital…again I didn’t want to upgrade but I was missing out on so much that I gave in, now mirrorless has come along and I find it offers new and exciting aspects that my current gear doesn’t give so I’ll probably upgrade again….What I’m referring to is Canon are constantly moving forward with much better technology.
The same can’t be said for the MT / SAK market. It’s as dull as ditch water, basically overpriced crap. Hence save your money and buy a older used tool. When sales dwindle they may either go bust or get to work , as it is it’s nothing more than stagnant and depressing.
Great points made
It would be awesome to see something exciting om the MT world 
Sent fra min M2002J9G via Tapatalk
-
Today's addition. I've been trying to post this all day but things keep getting in the way! :ahhh
One of the most sought after Wenger Knives is this Ueli Steck model from the Titanium series. The Ueli Steck model is the largest of the three knives in the Titanium Series, and was a collaboration with record setting Swiss Mountaineer, the late Ueli Steck.
Due to the cost, these knives never sold in high numbers, and were produced only in Wenger's later years, leading to a certain scarcity that appeals to collectors. In addition to Titanium handles to reduce weight, this particular knife features a one handed opening, liner locking, serrated blade with wrench cutouts, a can opener, bottle opener (with integrated flathead screwdriver and wire stripper) and a metal saw/file.
Learn more about the Ueli Steck and other Titanium series models, check out SAKWiki.com! https://sakwiki.com/tiki-index.php?page=Titanium+Ueli+Steck
@wenger_official @uelisteck @uelisteck #uelisteck #uelisteck🇨🇭 #wengeruelisteck #wengertitanium #wengertitaniumline #wengerknife #wengerknives #wengerswissarmyknives #wengerswissarmyknife #swissarmyknife #swissarmyknives #swissarmyknights #sakwiki


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
