Social Media Stuff
-
Today's addition. I've been trying to post this all day but things keep getting in the way! :ahhh
One of the most sought after Wenger Knives is this Ueli Steck model from the Titanium series. The Ueli Steck model is the largest of the three knives in the Titanium Series, and was a collaboration with record setting Swiss Mountaineer, the late Ueli Steck.
Due to the cost, these knives never sold in high numbers, and were produced only in Wenger's later years, leading to a certain scarcity that appeals to collectors. In addition to Titanium handles to reduce weight, this particular knife features a one handed opening, liner locking, serrated blade with wrench cutouts, a can opener, bottle opener (with integrated flathead screwdriver and wire stripper) and a metal saw/file.
Learn more about the Ueli Steck and other Titanium series models, check out SAKWiki.com! https://sakwiki.com/tiki-index.php?page=Titanium+Ueli+Steck
@wenger_official @uelisteck @uelisteck #uelisteck #uelisteck🇨🇭 #wengeruelisteck #wengertitanium #wengertitaniumline #wengerknife #wengerknives #wengerswissarmyknives #wengerswissarmyknife #swissarmyknife #swissarmyknives #swissarmyknights #sakwiki


-
@tosh said:
There does seem to be a familiar pattern emerging here..
Tim leatherman semi retires and with it goes the quality.Carl Elsener passed away and the innovation disappeared along with him
Don’t know if Gerber or SOG are still run by the same person that brought us the over engineered Gerber's and SOG’s of yesteryear.
It seems the newer generation of CEO’s have a completely different mindset.
I often get the feeling those early pioneers wanted to build and deliver the best possible tools, the byproduct was profit, today it seems they want to deliver maximum profit with the byproduct being a much inferior tool.
It's easy to say things like "it's not the same since Tim Leatherman (or Steve Jobs or whatever) retired" but I'm not sure that's the right place to point the finger.
Ben Rivera, current CEO of Leatherman has been with Tim almost since the very beginning, and I can't think of anyone more qualified to take the helm (unless of course LTG wants to call up a certain Canadian forum owner :P) so I don't know that we can place the blame there. Yes, as CEO, the buck stops with him, but I think it's apathy in the ranks more than anything else.
It could also be a simple matter of taking the form as far as it can logically go. I mean, how many different configurations of knife blades, pliers and various sizes of flathead screwdrivers can Leatherman really offer?
Of course, I'd still really like to see an actual shears based EDC tool, and maybe some blunt nosed pliers, but hey, what do I know? My car is nowhere near as fancy as any of the ones in Leatherman's executive parking lot....
Def
-
Reeves knives, after Chris left. Cold Steel, without Lynn, similar thoughts and issues
-
Didn't Reeves son take over along his mother. Would have thought that would keep the company the same as ever

Sent fra min M2002J9G via Tapatalk
-
There were a few complaints for the 31, I think, and the overall quality after he left, as seen in BFs Cris Reeves sub-forum.
It was hinted that the divorce settlement/agreement that basically removed the owner/dreamer/head designer from the company was the reason for the issues.
Originally he was supposed to stay on as a consultant but later he left.
This is what I recall from the discussion (not 100% correct, possibly),and the information is still available in various BF threads.
Success seems to be a burden on marriages, as the GEC owner is also divorced, with his wife leaving for a few years and now returning to the company to do admin work.
And lets not forget the recent divorces of the tech billionaires :)
-
with a title like "Social Media Stuff" we are bound to bring in gossip :D
-
@dks said:
There were a few complaints for the 31, I think, and the overall quality after he left, as seen in BFs Cris Reeves sub-forum.It was hinted that the divorce settlement/agreement that basically removed the owner/dreamer/head designer from the company was the reason for the issues.
Originally he was supposed to stay on as a consultant but later he left.
This is what I recall from the discussion (not 100% correct, possibly),and the information is still available in various BF threads.
Success seems to be a burden on marriages, as the GEC owner is also divorced, with his wife leaving for a few years and now returning to the company to do admin work.
And lets not forget the recent divorces of the tech billionaires :)
I have missed quite a few details then

Thanks
Sent fra min M2002J9G via Tapatalk
-
@dks said:
Reeves knives, after Chris left. Cold Steel, without Lynn, similar thoughts and issuesI haven't seen any recent CS stuff since Lynn sold the company, and I've never been able to afford to be as familiar with CRK as I'd like. :ahhh
From what you are saying about him though, it is starting to sound like John Fogarty being kicked out of CCR the later being sued for sounding too much like CCR, where he had written all of the songs.
However it happens, I hop that situation works out for Chris- he seemed like a great guy when we had lengthy discussions at SHOT.
Def
-
Based on internet gossip, Cold Steel still seems to be OK and Chris Reeves knives despite some issues still appear to produce a good product, especially their older models.
Lynn started a new company, for the fun non knife stuff, but little else is known by me.
-
Today's edition.
Before he was a Forged in Fire repeat contestant, and even before he was a designer for Columbia River Knife and Tool, custom knife maker Ray Kirk was a buddy of mine and supported us at Multitool.org.
This is the Damascus version of the original Raker Ring Tool, which eventually became the basis for the CRKT KERT or Keyring Emergency Rescue Tool.
We have had a few iterations of this tool over the years, including some stamped MTO for Multitool.org members!
Ray, if you are reading this, I hope you are doing well, and thanks for being a great friend!
@rakerknives @crkt_knives #raykirk #rakerknives #rakerringtool #crkt #crktknives #crktkert #columbiariverknifeandtool #columbiariverknifeandtools #forgedinfire #forgedinfirecontender #forgedinfire🔥 #ringtool #rescuetool #multitools #multitool #multitooldotorg

-
That's a cool one

Sent fra min M2002J9G via Tapatalk
-
I'm going to try something a bit different tomorrow.
Regular scheduled service will resume on Wednesday!
Def
-
Had some fun yesterday!
Admittedly there are very few benefits to being my friend, but at least you'll have good tools!
I was out flying drones with a friend and noted the tools I've given him, a Victorinox Soldier and Leatherman Blast are handy and seeing use!
@atlantic_aerialworx @victorinox @victorinoxnorthamerica @leathermantools @leathermancanada #leathermanblast #leathermanblastmultitool #Leatherman #leathermanmultitool #leathermantool #Victorinox #swissarmy #swissarmyknives #swissarmyknife #victorinoxsoldier #drone #dronephotography #dronephotographer

-
Always great to see someone using tools that have been gifted to them

-
Absolutely!
He runs an aerial filming company that uses drones for aerial footage for movies, TV, commercials and real estate. These are always on tight budgets and deadlines, so I figured he needed some good tools he could rely on.
Def
-
I decided to go with a more traditional one.
While not as popular as the Leatherman Raptor, the SOG Parashears has more functions and SOG's Compound Leverage system, which puts more pressure on the blades, allowing you to cut more.
In addition, the Parashears includes a rescue cutter, oxygen wrench, glass breaker, serrated rescue blade, bottle opener with integrated flathead screwdriver, Phillips screwdriver, awl and tweezers.
@sogknives #sog #sogknives #sogmultitool #sogmultitools #multitools #multitool #rescuetools #emt #emttool #rescueworker #rescueshears #multitooldotorg


-
And another one...
On thing seen all too rarely in the multitool world is a ratchet. Screwdrivers are great, bit drivers are fantastic, but a ratchet makes everything better!
This small ratchet from Victorinox takes standard 1/4" bits, both in the ratchet head and in the end of the handle. Originally it came with a set of parts issued with certain versions of the SwissTool, but they can often be obtained on their own for very little money- and well worth it if you spot one!
Want more? Of course you do, so check out SAKWiki.com! https://sakwiki.com/tiki-browse_image.php?imageId=2244&highlight=Ratchet
@victorinoxnorthamerica @victorinox #victorinox #victorinoxratchet #swissarmyknife #swissarmyknights #swissarmyknives #ratchet #edcratchet #edc #edctools #whywouldntya #smalltools #diy #beprepared



-
While it is technically not a Swiss Army Knife, the Swiza brand is not without a certain pedigree, despite being a relative newcomer.
Founded by former Wenger CEO, Swiza is a more modern redesign of the same theme, and still made is Switzerland.
This particular model, the D03 features a can opener and bottle opener, both with integrated flathead screwdrivers, tweezers, an awl, a corkscrew and a blade with an ingenious lock release- it is behind the textured silicone handle, under the shield!
These are well worth checking out if you are looking for Swiss quality with a more sleek, modern feel!
@swiza #swiza #swizaknife #pocketknife #edcknife #edcknives #edcknivesandtools #pocketknives #swissarmyknights #sakwiki #everydaycarrytool #everydaycarrytools #everydaycarry



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
