Corkscrew or Philips Head
-
I'm with the corkscrew clan. With it, I untie shoelaces, impromptu grocery bag carrier, coat hanger (wind it down through plaster/Gipsum board and hang coat/jacket/hat from Climber or Spartan
) and of course uncork an end-of-day celebration libation! For my purposes and/or use, the back Phillips is to cumbersome to work with, and I'm afraid I'll torque off the liners, scales and/or pin; I prefer inline Phillips drivers. -
Yes. No. Maybe?
-
Corkscrew for untying knots- my daughter is trying to learn to tie knots.
Sent from my SM-G991U using Tapatalk
-
I also divide the SAKs into two camps. With back tools and without back tools. I only use SAKs without back tools.
For me personally, the corkscrew is an absolute no go, I really have zero use for it and it feels uncomfy in the hand. The phillips is as a back tool on the wrong place (the inline works way better). I only need it at home or at work, but there I have a fully equipped workshop nearby.
But I like the old, angular philips, they were better adapted to the scales and some had a useful additional function with the nail file. If they were still common this would be an option for me, so I voted for the philips.
-
I bought a Tinker with the thinking that the Phillips backtool is one of the more useful options... but I have since found it of very limited use due to large hands and the way the backtool cannot so easily reach screws in so many situations. As with another poster, I mainly use it for my Lansky sharpener. I would much prefer to have the in-line Phillips drivers.
Conversely, I do use the corkscrew sometimes, including the occasional bottle of wine for someone else, but really it's all about Minnie Driver and how she helps me fix peoples' glasses. Even my daughter can tell you what the thing is for and she's only two!
-
@Valkie said:
While the corkscrew is useful for carrying the eyeglass screwdriver, I prefer the functionality of the Phillips head.In 63 years, I have never once used a screwdriver and I doubt seriously if I will ever really have the need.
I'm farsighted, so I can't see eyeglass screws without my glasses. :-\ However, now that I've discovered the Fireant, I have a reason to like the corkscrew. For hikes and camping: corkscrew. Around town or the house: screwdriver.
-
The debate as old as time itself

The philips is nice is when I want the most compact package possible, but I’ve come across very few screws that could actually be turned with this awkwardly placed driver. When I do, the can-opener usually will do the job better, with less risk of putting too much torque on the pivot.
The corkscrew to me is more in the spirit of an SAK tool; capable of more than its intended purpose, even adding extra capability by carrying other tools.
-
Phillips - carried Tinkers for about 30 years.
-
For me it's still for the most part irrelevant, i carry both of them, even if i favor the CS more (Climber), as the CS is more useful for me than THAT phillips sd. The Philips makes the sak more sleek and feels better in the hand and pocket, but the CS makes the sak easier to grip as the CS loops "locks" better on my fingers. For the SD i'll either use the can opener or bits with a bit adapter and the bottle opener.
As far as the micro SD carry, it's irrelevant as a don't carry it on the CS anyway, i carry it on my utility/coin pouch. Decided i don't like how it looks and feels attached to the CS anymore, as well as having to take it out every time i use the CS, leading to potential loss... and makes more sense to carry it separately for when i carry a sak with a backside phillips -
Corkscrew of course. Iconic. Most of my SAKs have the corkscrew, except some 111mm (and obviously the small SAKs).
I use the corkscrew for opening wine bottles. Occasionally. -
Corkscrew. No brainier for me. For all of the above reasons and more. I’ve tried to like the back tool Philips but just don’t. Hats off to the corkscrew!

-
While I carry a Pioneer X most of the time, and a Compact before that, I chose phillips. I have a Super Tinker, but no Climber. If I have a choice (I think 4 layers or less) I'll pick a phillips SAK.
-
Oldest question in the book, the answer is corkscrew, of course. Unless you don't drink red wine, or very cheap one.
-
Plus the corkscrew is great for opening jars, something I learned here - works like a charm!
-
For me it's the corkscrew. I've tried the backside Philips when I EDC'd a Super Tinker and a Deluxe Tinker, but as others have mentioned, I found the limitations of the driver not worth it. I switched to EDCing an Explorer a few years ago and have the best of both worlds IMO.
-
I'm a lot more likely to use the Phillips for its intended purpose. However, the corkscrew can come in handy, and it can also carry additional useful things. These days, I rarely use either, so I don't have a preference.
-
@Rich S said:
How? Refer me to the thread please.Rich, can’t remember which thread it was, but insert tip of the corkscrew under the lid of the tight jar you can’t open, twist gently and if you’ve got it in the right place the seal pops, and hey presto you can open the jar! A neat trick I learned here.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
