The Hacked Leatherman Owners Club.
-
That is one good mod'ed PSTII, Echotech; congrat on a job well done!

-
-
I did a quick mod to my Blast today. I replaced the eyeglasses bit driver with a cut-down Surge/ST300 awl. I had originally ordered this awl with the intention of modding my Wave, but it proved to be too long and thick to easily replace the Wave's eyeglasses driver, even after I did a rather messy job of grinding it shorter and thinner. I also had to reshape the pivot in order for the awl to engage with the Wave's lock. Ultimately, I wasn't able to fit it in my Wave to my satisfaction, and it has been sitting in a drawer since then.
But, now my Blast has an awl!


-
The awl is not perfect; the ground-down retrieval tab is basically impossible to reach because it's recessed compared to the other tools. I have to use the locking notch to pull the awl open instead.

-
An awl in a Blast is about the only thing it doesn't have from the factory :ahhh Great job

-
@Poncho65 said:
An awl in a Blast is about the only thing it doesn't have from the factory :ahhh Great job

Thank you! I'm almost satisfied with it myself! I like the Surge/ST300 awl because it has that groove on it that makes it more effective for drilling and reaming. I wish the awl on the Rebar/Bond/Curl had that groove.
-
Charge Knife


-
So I think I want to start my first modification. Rebar awl into a charge to replace the small eyeglass screwdriver. Any tips? What's the best tools for opening the rebar?
Thanks for your help.
-
-
-
those wrenches are the best if you plan on modding anything Leatherman 
I believe that the awl is thicker than the eyeglass driver, so might have to remove some washers as well
and perhaps shuffle things around to make sure it closes 
-
-
PST 1.5




-
Thanks tricho
I tried to put in as much as I could with what space I had :D 
-
Hi guys.

Leatherman KICK WAVE was my first moded used tool.
(Big screwdriver from REV cause i need a little bit thinner,
Awl from SURGE which has to be grinded to fit)
Here in Germany you can get problem with police when you have a locking knive with you, which can open by one hand.
Not so good to use but was a compromise.
In combi with Victorinox Manager was my edc.Btw... always good to have magnets and pin with you ;)


-
Nice 8) the Kick is always a good platform for modding

-

That's a neat solution! You get the best features of both the Wave (outside-accessible tools) and the Kick (nonlocking, interior blade to stay legal), combined with a useful selection of tools. Doesn't look like too much of a compromise to me.
I'm glad that Leatherman (just like Victorinox) has re-used the same parts (like the medium flathead screwdriver and the Wave/Charge/Blast/Kick/Fuse/Bond/Curl plier head) interchangeably in so many different multitools. It makes modding a Leatherman so much easier!
-
Dual colored Rebar with Kick clip, scissors and diamond file



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
