Daredevil Challenge 2021
-
thanks Steve, hope you’re not too badly affected by the storm Poncho, looked terrible on the news 
-
We weren't affected badly at all here at home
just to much rain to work today :D -
Day 31
Bonus Picture!
Wearing yesterday's shorts with the MP600 still on my belt, so it got one more use before going back in storage.
The bottle opener works very well.
-
The end


Pliers:
The pliers are needlenose (I think I erronously stated that they were blunt nose in a previous post) combination pliers with bypass wire cutters. The pliers open farther than most other MTs, allowing it to engage larger diameter nuts. However, the wire cutting edges are not beveled as with typical bypass cutters. While this may allow the MT to withstand cutting harder materials (it lacks a hard wire cutting notch), that means it actually shears materials in two, often with a sudden snap as the material fails due to the shear force. In other words, it does not cut materials smoothly. Also, the lack of sharp cutting edges allows the material to be pushed foward while closing the pliers. Sharp edges would penetrate into the material and grab it. It is especially aggravating when trying to cut Romex cable.Handles
The handles are close together, making the tool feel compact in hand. They are just far enough apart that I did not pinch myself badly, even when the handles snapped shut while cutting wire. But they could be anoth centimeter farther apart in my opinion. Also, the closeness of the handles hindered me somewhat while trying to manipulate small items. But the closeness became an advantage while working with larger diameter items.The handle also featured a 1/4" bit holder with magnet. I had no difficulties driving screws with the MT.
Finally, one of the handles has a L shaped tab that serves to lock the tools in place when closed. There is no danger of having a blade close on you if used properly.
Drywall saw
Utter smurf unless you only need to cut straight lines that you started with another saw or knife blade.Awl/reamer
Robust, works well starting holes in wood. Was able to make a hole in a PVC conduit. Probably can be used as a conduit reamer.Serrated blade
Sheepsfoot shape. Cuts well enough.Plain edge blade
Clip point. Sharp edge and point. Tends to ride out along with file, which has caused me to lose a little blood a couple of times.File
The star of this MT in my opinion. Multipurpose, with two file sides, a chisel-ground scraper edge, and wire stripper notches that actually work well.Overall impression
Robust tool. Not as easy to manipulate as other MTs. As a tool marketed to electricians, it has one major selling point (the multipurpose file) and two major drawbacks (bad drywall saw, poor wire cutting ability).Can I go back to my Super Tool now?
A late congratulation on the new badge and finishing!

It is my first time seeing a Klein tools MT up close and personal, and I have this biased view that L shape handle and the closeness of it will no doubt give some one the worst blood blister of the century. Turns out it is not the case, and actually I think it is a passable tool as it is. I don't know what an optimal drywall saw would look like, but that wire cutter surely is a fail for electrician. Great writeup!
Btw, this maybe a little too early to write, but I hope someday the young little one will find this thread when he joins MTO, and wouldn't it be great if he too could do a challenge here sometime?(probably not with his current tool set). :D
-
@comis said:
A late congratulation on the new badge and finishing!
Thanks! I am happy I took part in the challenge. Thank you for organizing it

It is my first time seeing a Klein tools MT up close and personal, and I have this biased view that L shape handle and the closeness of it will no doubt give some one the worst blood blister of the century. Turns out it is not the case, and actually I think it is a passable tool as it is. I don't know what an optimal drywall saw would look like, but that wire cutter surely is a fail for electrician. Great writeup!
A drywall saw should have a tapered tip so that one can penetrate the drywall to begin the cut. Also, it is helpful if the teeth are formed in such a way that allows cutting on the push and pull strokes. Here is an example of a typical drywall saw:

The Klein saw has neither of these attributes:

Btw, this maybe a little too early to write, but I hope someday the young little one will find this thread when he joins MTO, and wouldn't it be great if he too could do a challenge here sometime?(probably not with his current tool set). :D
I would love it if my grandson eventually joined MTO and participated in a challenge :D
He is about the same age as your son (4 years old), so I guess it will be a few years before either of them can participate. -
@Adam5 said:
Thanks! I am happy I took part in the challenge. Thank you for organizing it
A drywall saw should have a tapered tip so that one can penetrate the drywall to begin the cut. Also, it is helpful if the teeth are formed in such a way that allows cutting on the push and pull strokes. Here is an example of a typical drywall saw:

The Klein saw has neither of these attributes:

I would love it if my grandson eventually joined MTO and participated in a challenge :D
He is about the same age as your son (4 years old), so I guess it will be a few years before either of them can participate.Pleasure is all mine, and thanks for the pix on drywall saw, I'd learnt something new today.
Mine is 2 this year, and I look forward to that day he could join us.

-
A shout-out to Echotech...
This afternoon I'm poking around at an estate sale and what do it find? Hammerhead's cousin!
$6 US, with belt pouch.
I'm now the proud owner. :D

-
Is this the beginning of the Hammerhead Challenge? :ahhh
-
@ReamerPunch said:
Is this the beginning of the Hammerhead Challenge? :ahhhThat's not a challenge, it's a permanent lifestyle change :ahhh
-
@ReamerPunch said:
Is this the beginning of the Hammerhead Challenge? :ahhh@GearedForwards said:
That's not a challenge, it's a permanent lifestyle change :ahhh- Echotech
- SteveP
Who else is going to join the club? :ahhh
-

The badge will be awlsome
-
A 30 Day Hammerhead Challenge? Interesting...

-
That’s definitely the badge, I’m in…again :)
-
It remembers me a meme... Changing some words only
"I can't choose the Hammerhead life, the Hammerhead life choose's me"
Enviado de meu Moto Z2 Play usando o Tapatalk
-
In for life :) -
I just received a package of refrigerator magnets from Comis by way of Nix!
Comis, they are awesome and well worth the wait. Thank you for doing this for us. You're the best. Thanks also to Nix for forwarding these to the U.S. members so Comis only had to send the one package to the U.S.. That was most kind of you.
to both of you.
-
@Alan K. said:
I just received a package of refrigerator magnets from Comis by way of Nix!
Comis, they are awesome and well worth the wait. Thank you for doing this for us. You're the best. Thanks also to Nix for forwarding these to the U.S. members so Comis only had to send the one package to the U.S.. That was most kind of you.
to both of you.Congratulations and kudos to both Comis & Nix

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
