CRKT Natural
-
Ok ok, guys, the monster Natural it won't be if I get one....how about the Natural 2? Some what smaller and still just as sexy

-
I dig CRKT's ID works tools. They are unique, functional, and just all around cool. I never got into their knife line at all. They have a lot of nice looking knives but when handling them at the store they just didn't do it for me. Also I find it hard to get excited about "premium 8Cr13MoV ".
As far as the natural goes it sure does look sweet. It seems they managed to get a lot of custom looking parts on a production knife which is cool. Just from looking at the specs and not handling the knife it seems like it would be too fat and heavy for me to pocket everyday. It also suffers from the CRKT underwhelming steel syndrome. Like Mike I also had a CRKT in which the blade steel was so soft it made my SAK blade appear to be made of melted diamonds.
-
Well guys, after using the CRKT Natural 2 for a while I must agree it's quite an awesome knife (review to come sometime soon). It's heavy yea, but it makes up for it in ergos, performance and sheer looks. One thing bugged me bad about it though; it looks that good but CRKT had to go and slap that darn Outburst system on it.
Now don't get me wrong, I love assisted knives and CRKT's is good in the respects that you can remove it if you wish. Well I attempted to do just that with the Natural, I started taking the knife apart to get to the spring system. I get 95% of the way there and one screw refuses to turn (one underneath the bone handle) and it strips the head. Boy talk about ticked off, I thought that was a lot of work to get there and the darn thing strips.
Well I send an e-mail to the folks at CRKT and they tell me that it's a misprint and the spring on that particular model is not to be removed. Talk about a "say what?" came out of my mouth, I felt like..."sure! now you tell me!". So I figure ok, I have got to live with it and move on. The knife works well with the Outburst works well but there is something about the look of the knife and how it clashes with me knowing it's spring assisted.
Well last night I had a eureka moment, I thought if I could get a small screwdriver in there and once the screw that holds the spring in was loosened I would tap the spring out of the hole it screwed into. In short it worked, 2-3 mins later I had what I wanted, a fancy looking knife that was not cluttered up with some silly AO system. Course there is a slight drawback now and because of the knife's construction I could not reinsert the spring without alot of work. Most knife blade's have a large enough detent to hold the blade closed, well this knife isn't held closed very well. I think the spring for the AO help aids in keeping the blade closed, not too much of a problem considering it's tip down only carry. I will test it out today and see how well it works with no spring, so far I like it and feels more natural than the wacky spring system in there.
I know none of you folks on here have one of these knives but I figure it's good info for you folks who might look to getting one in the future. And the steel which they say is "premium", well it sharpens and holds an edge well. Granted it's no S30V or even a 154CM but it does it's job, heat treatment on this model seems to be rather good and I have no edge holding issues with the steel.
-
I've been thinking about adding one to my collection as I have been a fan of CRKT for quite some time now..............

<a href="http://img366.imageshack.us/my.php?image=crktm113d01.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img366.imageshack.us/img366/3342/crktm113d01.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> <a href="http://img2.imageshack.us/my.php?image=crktm60tansotfb02.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img2.imageshack.us/img2/4115/crktm60tansotfb02.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> <a href="http://img16.imageshack.us/my.php?image=crkttuition01.jpg" target="_blank" rel="noopener noreferrer"><img src="http://img16.imageshack.us/img16/8550/crkttuition01.th.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
............but there are other models I prefer and want to get those first, but I will got one eventually. :D
@Mike, Lord of the Spammers! said:
I would guess they have, I own a My Tighe and it holds a good edge, don't sharpen it very often. You folks who have the ID works tools? You have any edge retention problems?
The old M16 and one of there Rolock folders i had, would loose there edge just by staring at it ::)
Mike, what M16 did you have? Reason I ask is one of my main EDC's for around a decade now is a older M16-04 in AUS-8, one of the best folders of this type I own.......

Edge retention has never been a problem, MOF Columbia River has been known for a good heat treat on their AUS steels. Granted, it ain't no S30V or the like but for a mid range stainless CRKT does the AUS-8 good. Just curious if yours was of AUS-8 or one of the softer steels.
2xTap
-
The rolock was either ATS 55 or 420 something
, and can't remember as I gave it away in less than a week I was so unimpressed with it ::)The M16 wasn't mine, but the bloke who it belonged too (who I respect enormously) said that the edge retention was considerably inferior to a sak :-\
Now his may have been a one off, but due to my poor experience with the Rolock, I was quick to believe him :-[
-
Mike,
The Rollock's only came in two steels, that of AUS-6 and AUS-4. Neither are super edge holders although the AUS-6 is decent, about on par with your average 420HC. AUS-4 is mediocre at best and very similar to 420J2 in my experience.
As to the M16 Series they have come in a wide range of steels, from AUS-118 down to AUS-4......just depends on the model series. Was just curious.
2xTap
-
I have a couple of knives, some of those Chinese grades and some AUS-8 and they all hold decently, I don't know if they've had problems with tempering in the past but all of mine are fine knives. :D
-
@2xTap said:
Mike, what M16 did you have? Reason I ask is one of my main EDC's for around a decade now is a older M16-04 in AUS-8, one of the best folders of this type I own.......
Edge retention has never been a problem, MOF Columbia River has been known for a good heat treat on their AUS steels. Granted, it ain't no S30V or the like but for a mid range stainless CRKT does the AUS-8 good. Just curious if yours was of AUS-8 or one of the softer steels.
2xTap
I've had a similar experience to Mike, I've got an M16-10KZ and i've seen playdough knives hold their edge better than this thing, looks nice and opens quickly but the blade is terrible.
-
Abstraction,
The M16-10KZ is of their Zytel line, all of which come with the softer AUS-4 blades. Want a good M16 stick with those with AUS-8 blades like the aluminum handled versions in my pic above.
2xTap
-
Well i picked it up in the sale out of curiosity and the flipper and design impressed me, but yeah the steel they use is completely useless for a blade and makes me wonder why they bothered making it. It wasn't exactly 'cheap', reduced from roughly £20 to £15 and i would have thought even at that price point they would use something a bit better. If I see one with a better quality blade around i'll check it out with an open mind though :)
-
I always wait until they're on closeout, I picked up two fire engine red zytel handled M16's with AUS-8 blades for like $25 each. :D
They were so cheap I have no qualms beating the crap out of them, even to the point where I've practiced throwing one no-spin... it's exceptionally abused but still servicable.
And even the Chinese steeled ones are pretty nice for how much they cost.
-
The Rollock's only came in two steels, that of AUS-6 and AUS-4. Neither are super edge holders although the AUS-6 is decent, about on par with your average 420HC. AUS-4 is mediocre at best and very similar to 420J2 in my experience.
As to the M16 Series they have come in a wide range of steels, from AUS-118 down to AUS-4......just depends on the model series. Was just curious.
2xTap
AUS 4 does sound familiar

If it struggles to cut butter then that's what it used :D
-
I'm glad to hear the AUS8 is good as I have been tempted by one for a while.
-
Yeah if it wasn't for the blade on mine i would be happy with it, the flipper is fast, the lock is very strong and it looks nice so if the aus 8 is a massive improvement then its probably worth checking out. It's just a shame i opted for the version with such poor steel that there's little point actually flipping it open when the handle would do just as good at a cutting job :P
-
I have one of the earliest M16-12 models, pre-flipper era... neener neener! :D
Def
-
You can go off some people. ::) :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



