CyberTool owners thread
-

Well done.
-
Beautiful

-
great work!

-
I recently acquired my first cybertool -34. And what a great tool it is! I was contemplating 29 and 34 and I am glad I pick the 34! Already used the pliers in my office! I am sorry now I did not go the full size of 41.
-
Decided to make a TSA compliant Bladeless Cybertool Lite. Extra parts and too much time on my hands after Thanksgiving.



-
@pa_strunk said:
Decided to make a TSA compliant Bladeless Cybertool Lite. Extra parts and too much time on my hands after Thanksgiving.

-
nice work! 
-
@pa_strunk said:
Decided to make a TSA compliant Bladeless Cybertool Lite. Extra parts and too much time on my hands after Thanksgiving.Nice work!
-
Thanks guys. Anything to get away from the TSA SAK collection. Also came up with an easy way to put 4x1 mm magnets in bit drivers. Let me know if you want specifics.
-
@pa_strunk said:
Decided to make a TSA compliant Bladeless Cybertool Lite. Extra parts and too much time on my hands after Thanksgiving.TSA confiscated my wife’s sewing scissors years ago. They were smaller than the SAK scissors. I wouldn’t take the risk myself. Not with risking losing such a nice mod.
-
Don’t worry, plan to have a “readily available” copy of their own current guidelines and at worst go through security twice after a handoff to my daughter or wife. One or the other always drops me off. Will defiantly let you guys know how the trial run goes.

-
@pa_strunk said:
Will defiantly let you guys know how the trial run goes.No need, we are all friends here :D
-
@pa_strunk said:
Thanks guys. Anything to get away from the TSA SAK collection. Also came up with an easy way to put 4x1 mm magnets in bit drivers. Let me know if you want specifics.Could you share the magnet details? Thanks.
-
Sure, I only share this because I sometimes tend to do things the hard way and want to save fellow members the trouble. First, make sure you have 4x1 mm magnets. If they are thicker than 1 mm they will prevent the retention ball from working on Victorinox bits that come with cybertool. Second, you need to use either a 4mm bit, 4 mm bit extension or as you see in the picture, a Wiha 4mm to 1/4 bit adapter I cut in half to make a 3 inch magnet “holder/implanter”. Magnet proximal to the end is two part epoxied, and then the magnet I want to place in holder (see image below). Apply one drop of super glue covering about half of surface on end of magnet to insert. Push it in and wait 24 hours to remove. The reason I like to have a three inch bar attached to the magnet is to make sure I have plenty of leverage just in case any of the glue hinders removal of holder/implanter. I have used this procedure on at least 6 cybertool SAKs with no problems. Works great and makes the tool far more versatile with an endless selection of inexpensive 4mm bits. See Wiha item below. I have no affiliation with Amazon if you purchase. Let me know if you guys try it or come up with a better idea.
Wiha 28581 Bit Holder Adapter For... https://www.amazon.com/dp/B002R0EI2M?ref=ppx_pop_mob_ap_share



-
Better add my digital signature to the Cyber club registry...
One Cybertool Lite:
[attach id=0 msg=2307524]

-
Are Cybertool replacement bits always as difficult to find as they are right now, or is the scarcity of replacement bits just a recent development due to supply line issues during the pandemic?
-
No idea about the availability, you can find some on ebay but that's quite expensive ! :ahhh
-
@Rich_SD said:
Are Cybertool replacement bits always as difficult to find as they are right now, or is the scarcity of replacement bits just a recent development due to supply line issues during the pandemic?I got a bunch of extras from Victorinox, via their UK distributor. This was mid-late pandemic too...
Might just be the US? -
My girlfriend bought me a CT34 for my birthday last year and it has slowly climbed its way up to being my main EDC which is surprising bic up till now my main EDC has been either an Explorer or an Outdoorsman. However when I’m not carrying the CT34 I find myself really missing the bit driver and the pliers. And the worst part is I don’t think my girlfriend has any idea how much of a SAK dilemma this ever so kind gift has brought about! :ahhh :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
